Why the 2026 Mazda CX-5 Still Uses an 'Old-School' Six-Speed Transmission
The Mazda CX-5 you're looking at here is new, believe it or not. Yes, the design looks a lot like the old one, but that isn't a bad thing. Even the powertrain is the same as before, right down to the six-speed automatic transmission. That makes it a bit of a rare bird, considering so many new vehicles have switched to eight speeds or more by now. We were curious about Mazda's decision to stick with the old-school gearbox, and since one of the company's executives had time to sit down with us ahead of the car's launch, we asked about it.
'The six-speed transmission works really well with our current Skyactiv-G engine, so we didn't want to change the recipe,' explained Stefan Meisterfeld, vice president of strategic planning for Mazda North America. 'It's very linear, very direct. The shift feel and the feedback we get from our customers, and also people like you in the press, is that this is a really good combination. So we didn't intend to change this, at least at the time of launch.'
It's true that the CX-5 is and has long been a solid driver. It's no Miata, but it's clear that the same people who build the MX-5 are the ones behind this four-door, five-seater family hauler. The Skyactiv-G engine that Meisterfeld mentioned is an interesting part of the formula—or recipe, as he called it—given that its peppy nature is due to high compression (13:1) instead of a turbo. Because of that, there's not as much torque, and it makes sense to run fewer gears so it isn't hunting around for the powerband. Mazda
Indeed, the 2026 Mazda CX-5's power figures are identical to the old one's at 187 horsepower and 185 lb-ft of torque. That's… not a lot, and though the recipe worked fine in its predecessor, we'll have to see how it feels with the new CX-5 growing substantially in size (+4.5 inches in overall length) and putting on a few pounds. Just how many, Mazda hasn't revealed yet.
Meisterfeld insists that it will still be enough.
'Our engineers, as I'm sure you know, they're very passionate about our driving DNA and the fun-to-drive aspect,' he explained. 'They're still fine-tuning the vehicle to ensure that it delivers the same performance as you're used to from the current CX-5, despite the vehicle being bigger. And yes, we can't fight physics, the car will also be slightly heavier, but our engineers, they do everything they can to keep our driving DNA in this vehicle, and I'm very confident you will be satisfied when you drive it.'
If anybody knows how to make a slow car feel fast, it's Mazda. I want to give them the benefit of the doubt here.
And as for the six-speed auto, I'm sure that it, too, will be fine. We'll see if it sticks around on the hybrid CX-5 coming in 2027 with the new Skyactiv-Z powertrain. When asked about that, and whether the six-speed's compatibility with the system was a consideration in keeping it on, Meisterfeld declined to share further details at this point.
Got a tip or question for the author? Contact them directly: caleb@thedrive.com
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
20 minutes ago
- Yahoo
3 Ways Trump's ‘Big Beautiful Bill' Could Hit Tesla Investors
Tesla investors have had a rough go in 2025, with a stock price that's down by more than one-fifth year-to-date and a major slump in global electric vehicle sales. I'm a Self-Made Millionaire: Learn More: Now, the Elon Musk-led company faces more grim news in the form of President Donald Trump's 'Big Beautiful' spending bill, which was signed into law on July 4th. Among other things, the bill will bring an end to federal tax credits on certain EVs. Here are three ways the bill could hit Tesla investors. Tax Credits Will End Federal tax incentives played a big role in boosting Tesla's EV sales in recent years, but those incentives will soon come to an end. Because of Trump's bill, buyers have until Sept. 30 to qualify for the federal tax credits on Tesla EVs before they're terminated, CBS News reported. Before the bill passed, new EVs came with a $7,500 federal tax credit, while used EVs came with credits of up to $4,000. The idea behind the credits was to make EVs more affordable. That's important, because the average purchase price of a new EV is about $9,000 higher in the U.S. than the average new gas-powered car, according to Kelley Blue Book data cited by CBS News. Used EVs cost roughly $2,000 more than comparable gas cars, on average. An end to the tax credit will hurt Tesla — and Tesla shareholders — because it narrows the number of potential EV buyers. I Sold My Tesla: Rival EV Companies Will Get a Boost As Business Insider reported, one key provision in the new bill is that cars made by companies that sold more than 200,000 'accepted' EVs between December 31, 2009 and December 31, 2025 do not qualify for the tax credit. This provision will mainly impact Tesla, which sells a lot more cars than that in a single quarter. In contrast, rivals Rivian and Lucid have not reached the 200,000 milestone, meaning their customers can still get tax credits. This could give them an edge against Tesla, at least over the short term. Sales Could Decline Further Tesla's EV sales have already slumped badly this year. The company recently posted second-quarter car sales of 384,122 — down 13.5% from the previous year, CNN reported. It was the biggest year-over-year decline in Tesla history, and followed a similarly dismal first quarter. Trump's spending bill will likely hurt sales even further because buyers will no longer have the same tax incentives. This means they'll have to dish out more money to buy a Tesla than in the past. 'It's on Tesla to make the case for consumers to even slightly pay up today versus some other EVs,' Seth Goldstein, an equity strategist at Morningstar, told Business Insider. More From GOBankingRates 4 Housing Markets That Have Plummeted in Value Over the Past 5 Years This article originally appeared on 3 Ways Trump's 'Big Beautiful Bill' Could Hit Tesla Investors
Forbes
an hour ago
- Forbes
Solid-State Batteries Still Face Hurdles But The Prize Is Huge For EVs
3d rendering group of solid-state or rechargeable batteries Solid-state batteries have been hailed as a game-changer for electric vehicles — always five years away, but never quite arriving. Solid-state champions say the technology, if perfected, would slash EV prices and weight, and maybe double range. Government subsidies wouldn't be required to sell them. Buyers would be infatuated. The trouble is the technology remains on the drawing board. Some experts say a breakthrough is imminent. Others point to problems said to be intractable. Because the prize is so tempting – an EV that can match and beat internal combustion engine's all-around utility - the world's leading automakers and the Chinese state are investing massively. These next-generation batteries seek to use solid electrodes and a solid electrolyte, replacing the liquid or gel electrolytes found in conventional lithium-ion batteries. The consensus opinion is that success is one last heave away. You can exclude Donald Sadoway, Professor of Materials Chemistry at the Massachusetts Institute of Technology, from the consensus. Sadoway, in an interview, said not only is the technology incomplete, the ability to produce at scale remains elusive. The current lithium-ion battery technology, which has moved on from nickel-based chemistry to lithium-iron phosphate (LFP), will have to suffice for a while yet, he says. LFP batteries are cheaper with lower energy density providing less but acceptable range than nickel-based batteries. Nickel batteries will still be needed for more expensive cars which require longer range. Cambridge, England-based technology consultants IDTechEX's vice president for research Dr James Edmondson thinks progress is being made and points out solid-state batteries are not a single technology but encompass various strategies with the ultimate goal of removing the liquid electrolyte and replacing it with a solid one. Some solid-state batteries that already exist have small liquid components. Late in the decade Edmondson expects to see prototypes of truly solid-state batteries between now and 2028 with premium vehicles the first adopters late in the decade. 'In terms of seeing them in larger production volume vehicles we wouldn't expect that until the 2030s. Even by 2035, we are predicting just over 100GWH of capacity for solid-state batteries, compared with our prediction for the overall EV car market at around 3,800GWH in the same year,' he said in an email exchange. solid-state batteries have the potential to revolutionize the battery industry by offering improved ... More performance, safety and longevity; 3d rendering. Will they live up to the promise of half the price, half the weight and twice the power? 'Solid state batteries will inherently start at a high cost due to their much less scaled manufacturing. Average cell cost for typical (lithium-ion) was around 80$/kWh in 2024, and we wouldn't expect solid state to match this until the late 2020s. Half the price would be a long way off, and maybe not possible, especially as lithium-ion is still decreasing, you eventually run into a base bill of material costs,' Edmondson said. 'Energy density for solid state certainly has the potential to be higher than the typical Li-ion. We would expect solid state cells to be able to achieve about 900Wh/L whereas the average high nickel NMC is around 400Wh/L,' he said. Packaging the cells is complicated. 'Overall, solid state should still be able to achieve a significantly higher energy density, but it won't be as straightforward as having cells that contain twice as much energy means a pack with twice as much energy,' Edmondson said. This is premature though, according to MIT's Sadoway, saying fundamental technical barriers remain. 'Solid-state technology is still in the research and development stage and I don't see anything in the market coming close to the finished product,' Sadoway said. Fundamental physical barriers Eliminating the liquid element is proving to be an elusive problem. 'We don't see anything coming into the market-place because of fundamental physical barriers, not any time soon. That's my assumption. I'm prepared to be surprised but I don't see how you can have all the key elements as solid. It really looks too difficult at the moment to overcome these barriers and if you do, there's the ability to manufacture. So there's a scientific problem and a manufacturing (at scale) problem,' Sadoway said. Sadoway has for years pointed out basic problems developing solid-state technology haven't been solved. Sadoway has been working on an aluminum-sulfur battery, which he has said would be cheaper at scale and safer than lithium-ion because it was incapable of burning. The project has stalled for lack of funds. Dr Timothy Gotsick, VP of Technology & Innovation at MacDermid Enthone Industrial Solutions, said today's batteries are already highly effective and efficient. 'It's easy to imagine even greater energy storage. By replacing lithium ions and liquid electrolytes, which are like using a basket-ball sized sponge to hold a cup of water, with lithium metal, you could pack the same energy into something the size of a tennis ball. The theoretical ratio of energy density between a graphite node and lithium metal is a little over 10. That is the basic principle behind a solid-state battery,' Gotsick said. Propel EV beyond ICE cars 'The implications are enormous if this technology can be realized. EVs are already capturing significant market share. With maximum energy density, enhanced safety, and faster charging, nearly all objections to EV adoption would be eliminated. In fact, such advancements could propel electric vehicles beyond the capabilities of today's ICE cars,' Gotsick said. Solid-state battery technology, the next frontier in energy storage, mind map infographics sketch. 'Of course if it were easy, it would already be done. But with stakes this high, many are racing to make it happen,' he said. Gotsick pointed to the leading invetors in solid-state research – Gotsick thinks the emergence of solid-state batteries can be measured in years, not decades. 'The change, when it comes, may look sudden. Due to the modular nature of EVs, it will probably be very easy to swap a smaller battery and its control systems into automotive designs. As a result, as soon as solid-state batteries are viable, they will see rapid adoption,' he said. IDTechEx's Edmondson believes solid-state promise a lot but still have hurdles to jump. Li-ion will maintain market majority 'We would expect production cars with solid-state batteries to be on the roads before the 2030s, but not in much larger production vehicles until the 2030s and even then, traditional Li-ion will still likely maintain the majority of the market share,' Edmondson said. In Europe, politicians have decreed that no new ICE vehicles will be sold after 2035. Forecasts show that is very unlikely with current technology. Rapid introduction of solid-state would transform EV sales. In the U.S., the Trump Administration dropped the plan to force at least half of U.S. new sedan and SUV sales by 2030 to be EVs. That's just as well because MIT's Sadoway says by 2035 in the U.S., ICE, hybrid and EV sales will be roughly the equivalent of today, but another problem will be demanding attention – the electric grid. 'Yes, in 2035 the U.S. the automobile market will be roughly the same as today, but by then the massive demand for electricity from computers, AI and EVs will combine to demand more electricity than the grid can supply,' Sadoway said. Rapid solid-state rollout clearly won't solve all the problems for EVs.
Yahoo
an hour ago
- Yahoo
Daimler Truck looks to the Old World for its new zero-emission trucks
Daimler Truck AG, the world's largest commercial truck maker, recently announced at its Capital Market Day an ambitious growth strategy called 'Stronger 2030,' which includes growth plans for the company's zero-emission vehicle (ZEV) footprint in Europe. The European pivot for ZEVs came as executives talked about the more favorable regulatory environment and incentives compared with the U.S. The pivot doesn't come without a cost. As part of a Costs Down Europe strategy, the company announced a headcount reduction of around 5,000 in Germany that includes a combination of material costs, research and development, operations and sales. These cuts are part of a €1 billion cost savings goal by 2030. This is the largest and most holistic efficiency program ever, according to the company. For Mercedes-Benz Trucks, maker of the electric eActros 600 cabover, the focus is on turning potential into profit following strong results in 2023 and recent news of Amazon Europe making purchases of the ZEV. The company hopes to grow its unit sales of its zero-emission vehicles in Europe to 25,000 units by 2030. Across the Atlantic, Daimler Truck North America (DTNA) continues to be a core profit driver within the larger Daimler Truck Group. DTNA has an electric Class 8 via its Freightliner eCascadia, but its diesel Cascadia remains the dominant player in the Class 8 truck space with an approximately 42% market share. Executives cited ongoing uncertainty over electric vehicle (EV) and ZEV incentives and recent regulatory rollbacks in the U.S. market as reasons behind the European ZEV pivot. Questions still remain over the status of California Air Resources Board rulemaking and clarity on what direction the Environmental Protection Agency wants to go. NOx emissions limits remain another topic under consideration. For a large truck maker, there isn't a dial one can turn to adjust NOx limits; the engines and NOx filtration systems are planned years in advance. Additionally, lack of EV charging infrastructure remains a headwind. Daimler notes that it has seen EV progress in markets like Denmark and Germany, where total cost of ownership paired with shorter distances is making EV trucks attractive compared with the North American market, where longer distances prevail. Outrider builds industry-first safety system for driverless yard operations The autonomous yard truck turf war in the trailer yard is heating up with Outrider recently announcing it has developed the industry's first safety system designed specifically for driverless movement in mixed traffic trailer yards. Outrider is a technology developer of autonomous yard operations for logistics hubs. The company's proprietary functional safety approach recently received validation from TÜV SÜD, a globally recognized independent testing and certification organization, determining it aligns with its AV Conformity Framework requirements. 'Outrider pioneered the yard automation space with the goal of making autonomous yard operations inherently safer than present-day operations, and we have prioritized the safety system from day one,' said Andrew Smith, founder and CEO of Outrider. 'It is not hard to create a driverless demonstration. It is a major technical undertaking to design an 80,000-pound robot that operates among over-the-road trucks, delivery trucks and warehouse personnel.' Smith spoke with FreightWaves about the milestone, noting that the company has been operating with both human drivers and safety observers for several years. According to Smith, the company has completed hundreds of thousands of fully autonomous trailer moves within its customers' fleets. Read the full article here. You're halfway there! To read the rest of the Truck Tech newsletter, subscribe below. It'll be delivered to your inbox every Friday at 11am eastern. While you're at it, check out this week's episode. The post Daimler Truck looks to the Old World for its new zero-emission trucks appeared first on FreightWaves. Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
