SFL Missions Inc. Included on Team Awarded Moon Mapping Study Contract by European Space Agency (ESA)
The Moonraker mission will consist of a single orbiter operating in a low-altitude polar orbit around the Moon. The orbiter will host a Light Detection and Ranging (LiDAR) payload to capture highly accurate elevation points of the terrain. These points will be used to generate 3D elevation models that will be relied upon to assess and select future landing sites.
Moonraker's LiDAR data will also serve a broader scientific purpose, including scanning permanently shadowed regions for water ice and providing valuable insights into the Moon's geological and interior composition. The Moonraker LiDAR will operator in two modes – one for broad-area scanning of the Moon's polar regions and the other for high-resolution surveys of specific areas of interest.
'As part of the Pre-Phase A contract led by NUVIEW, SFL Missions is supporting the mission concept by contributing to transit trajectory analysis, orbit design, and satellite platform conceptual design for Moonraker,' said Jesse Eyer, NUVIEW Space Missions Architect. 'We're proud to collaborate on advancing this visionary lunar LiDAR initiative.'
The mission analysis evaluates possible launch options and trajectories for efficiently entering into lunar orbit, and it studies how the operational orbit parameters impact the spacecraft design and payload data collection. The system design focuses on payload accommodation, spacecraft layout, and sizing of the various subsystem components. In particular, the propulsion system is sized with the appropriate amount of fuel to complete the transit phase and then maintain the operational orbit while counteracting perturbations caused by the Moon's irregular gravity field. Detailed mission and system requirements are also developed to guide future design phases for the project.
NUVIEW GmbH of Berlin, Germany, serves as prime contractor for the Pre-Phase A study team, which includes several members in addition to SFL Missions. NUVIEW GmbH is a wholly owned subsidiary of NUVIEW Inc. which is developing the world's first commercial space-based LiDAR constellation for 3D mapping of the Earth.
About SFL Missions Inc. (https://sflmissions.com)
SFL Missions Inc. generates bigger returns from smaller, lower cost satellites. Small satellites built by SFL Missions consistently push the performance envelope and disrupt the traditional cost paradigm. We build quality small satellites at low cost that work the first time and enable NewSpace companies to mass produce through our Flex Production program. Satellites are built with advanced power systems, stringent attitude control and high-volume data capacity that are striking relative to the budget. We arrange launches globally and maintain a mission control center accessing ground stations worldwide. The pioneering and barrier-breaking work of SFL Missions is a key enabler to tomorrow's cost-aggressive satellites and constellations.
Follow SFL Missions Inc.
Twitter X @SFLMissions
Instagram at sfl.missions
About NUVIEW
NUVIEW is a pioneering geospatial technology company headquartered in Orlando, Florida, building the world's first commercial LiDAR satellite constellation. Our mission: to deliver a continuously updated 3D map of the Earth's land surface from space. As the first mover in space-based LiDAR, we're combining cutting-edge satellite, sensor, and software innovations to unlock unprecedented global insights.
NUVIEW's integrated data platform empowers users to access and analyze high-resolution elevation models and imagery, including optical, SAR, hyperspectral, and thermal, across a wide range of applications, from climate science and infrastructure planning to agriculture, forestry, and national security. Backed by a team with deep technical expertise and a track record of commercial success, NUVIEW is shaping the future of Earth observation.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
6 hours ago
- Yahoo
Can AEVA's 4D Push Outpace INVZ's Automotive LiDAR Wins?
Aeva Technologies AEVA and Innoviz Technologies INVZ are the two key players in the world of LiDAR. Think of LiDAR as the "eyes" for self-driving cars, smart cities and factory robots. Both companies are trying to grab a piece of a multi-billion-dollar market, using advanced sensor technology for both cars and other industries. As the self-driving sector heats up and investors look for real-world business success, comparing AEVA and INVZ helps us see where the stronger opportunities truly they are aiming for similar markets, their strategies are different. AEVA stands out with its special "4D LiDAR" technology, which can not only "see" objects but also instantly tell how fast they are moving. The company is quickly expanding into profitable areas like infrastructure and industrial on the other hand, focuses on solid, "automotive-grade" LiDAR and has strong relationships with big car manufacturers. It is also earning money from upfront engineering work while waiting for mass production to begin. Both stocks have seen big jumps over the past 12 months, but their financial health and stock prices tell different stories. It's a good time to compare them side-by-side to see which might be a better investment. The Case for AEVA Stock AEVA's strategy of looking beyond just self-driving cars is starting to pay off. The company has landed big projects, like equipping Tampa International Airport with its 4D LiDAR, making it one of the largest airport LiDAR projects in the U.S. Plus, partnerships with groups like Sandia National Laboratories for nuclear security show that AEVA's technology works well outside the crowded world of autonomous vehicles. These wins imply potential for steady income and less reliance on those long, drawn-out car industry contracts. This sets AEVA apart from Innoviz, which still relies heavily on the auto sector for its is also showing big ambition by planning to increase its manufacturing capacity to 200,000 LiDAR units per year by 2026. Their role as the exclusive 4D LiDAR supplier for Daimler Truck's Torc Robotics division gives them a strong foothold in self-driving trucks. However, unlike Innoviz, which already has a high-volume pipeline with Volkswagen and Mobileye, AEVA's major car-related income is still mostly in the future. It depends on whether it can successfully ramp up production over several years and deliver at a large biggest challenge for AEVA right now is its financial health. In other words, the market is betting on huge growth that hasn't happened yet. AEVA's revenues for the first three months of 2025 were $3.4 million, tiny compared to Innoviz's $17.4 million. Also, AEVA is burning through a lot of cash, over $30 million every quarter. While the company has backing from big investors and strategic funding, AEVA needs to turn its partnerships into steady income to justify its high stock price. The Case for INVZ Stock Innoviz's strong partnerships with major car companies like Volkswagen, Mobileye, and BMW are central to why investors might like this stock. For instance, Volkswagen's ID. Buzz robotaxi program will use nine InnovizTwo LiDARs per vehicle, with shipments starting in 2025. This shows real potential for high sales volume soon. These deep relationships with car manufacturers provide clear income certainty into 2026-2027 and put Innoviz ahead of AEVA when it comes to getting their automotive products to market. While AEVA's wins in trucking and infrastructure are promising, it doesn't have the same immediate, high-volume production also has a financial cushion from its $95 million backlog of upfront engineering work (called NRE). This provides a steady stream of income until mass production really gets going. In the first three months of 2025, Innoviz's revenues soared 2.5 times compared to last year, hitting $17.4 million. This was largely driven by profitable engineering services, which also pushed their gross profit margins to a healthy 40%. While AEVA is pursuing high-profile pilot projects, Innoviz is already making money from engineering work at a larger scale. Plus, Innoviz has cut its operating expenses by 34% compared to last year and burns less cash, strengthening its financial position compared to AEVA, even though both face the risk of issuing more AEVA, Innoviz is also expanding into non-automotive markets such as smart cities and safety systems, which broadens its potential customer base. However, INVZ's heavy reliance on engineering income raises questions about how sustainable that revenue is until actual product volumes from car programs truly pick up in 2026. Scaling up manufacturing with their partner Fabrinet and transitioning to full production carries risks. Still, compared to AEVA, Innoviz has a more established revenue base and tighter control over its spending, offering more predictable short-term results and less speculative upside. Price Performance Over the past year, Aeva Technologies' stock has skyrocketed more than 500%, showing a lot of excitement around its new deals and expansion into different markets. Innoviz is up 138%, a smaller but still significant gain that's supported by actual revenue growth and success with car manufacturers. This difference suggests AEVA's rally is more driven by investor sentiment and hopes for the future, while Innoviz's stock performance aligns more closely with its current business results. Image Source: Zacks Investment Research Valuation Comparison Aeva Technologies' stock currently trades at a very high 45 times its expected future sales, making it look very expensive. Innoviz, in contrast, is valued at just over 3 times its expected future sales. This huge difference in valuation shows that the market is much more skeptical about AEVA's ability to quickly turn its partnerships into massive revenues compared to Innoviz's more modest and arguably more realistic expectations. Image Source: Zacks Investment Research Revenue Outlook As per the Zacks Consensus Estimate, AEVA's revenues for 2025 will be just over $17 million. While this shows projected 90% growth, it's starting from a very small base. Image Source: Zacks Investment Research Innoviz, on the other hand, is expected to bring in $60 million in revenues in 2025, which is more than triple Aeva Technologies' forecast. Innoviz is also projected to see stronger growth into 2026 as its car programs ramp up. Image Source: Zacks Investment Research Conclusion Both AEVA and Innoviz are chasing a massive opportunity in LiDAR technology. Aeva's expansion into infrastructure and its high-profile partnerships show exciting potential. However, its very high stock price and significant cash burn increase the risk if the company don't execute flawlessly. Innoviz, with its stronger ties to major car manufacturers, a more substantial current revenue base, and disciplined cost control, offers more grounded and predictable short-term these factors, Innoviz appears to be the better stock right now. Its combination of clear visibility into automotive sales, smart financial management, and a lower stock price makes it the more balanced choice in a sector that's still figuring out which companies will truly come out on top. INVZ currently carries a Zacks Rank #3 (Hold), while AEVA has a Zacks Rank #4 (Sell). You can see the complete list of today's Zacks #1 Rank stocks here. Want the latest recommendations from Zacks Investment Research? Today, you can download 7 Best Stocks for the Next 30 Days. Click to get this free report Aeva Technologies, Inc. (AEVA) : Free Stock Analysis Report Innoviz Technologies Ltd. (INVZ) : Free Stock Analysis Report This article originally published on Zacks Investment Research ( Zacks Investment Research Sign in to access your portfolio
Yahoo
8 hours ago
- Yahoo
Pony.ai launches around-the-clock Robotaxi service in China
has started a 24/7 Robotaxi operation in China's Guangzhou and Shenzhen cities. This marks an expansion from a 15-hour service window to round-the-clock availability in the company's development strategy within the country. The company has also increased its Robotaxi testing period to 24 hours a day in Beijing city of China, building upon its foundation of more than 50 million kilometres of autonomous testing globally. These tests, which span various traffic and lighting conditions, are said to be crucial for assessing the system's real-world performance. employs a multi-sensor fusion architecture that combines a 128-beam light detection and ranging (LiDAR), eight-megapixel cameras, and four-dimensional (4D) millimetre-wave radar. These will deliver 360-degree perception in low-light or nighttime conditions, where traditional vision-only systems may falter. The company's use of LiDAR and radar provides essential redundancy, enhancing the detection of low-contrast objects and mitigating the effects of headlight glare. This ensures safer navigation on the roads that are dimly lit or unlit. The advanced autonomous driving software stack, built on the "PonyWorld foundation model and virtual driver" architecture, is deployed in the seventh-generation Robotaxi fleet. It enables the precise detection of road elements and pedestrians up to 650 meters away, even in adverse weather conditions, due to a sensor self-cleaning system. In April 2025, collaborated with Tencent Cloud and Smart Industries Group, the cloud business division of Tencent Holding, to advance autonomous driving technology. The following month, the company entered a strategic collaboration with Dubai's Roads and Transport Authority (RTA) to bring its advanced robotaxi fleet to the region, marking a step in the company's worldwide expansion efforts. " launches around-the-clock Robotaxi service in China" was originally created and published by Just Auto, a GlobalData owned brand. The information on this site has been included in good faith for general informational purposes only. It is not intended to amount to advice on which you should rely, and we give no representation, warranty or guarantee, whether express or implied as to its accuracy or completeness. You must obtain professional or specialist advice before taking, or refraining from, any action on the basis of the content on our site.
CNBC
10 hours ago
- CNBC
Morgan Stanley upgrades an under-the-radar China robotics play, sees big upside
Investors seeking to ride the robotics wave should consider buying Hesai Group, according to Morgan Stanley. The bank upgraded the U.S.-listed shares of the Chinese tech company to an overweight rating from equal weight. Hesai supplies LiDAR products such as sensors, which are then used in the robotics industry. Shares of Hesai have surged 54% this year. Analyst Tim Hsiao's new price target of $26 per share, up from $23, implies a further upside ahead of 22%. HSAI YTD mountain HSAI YTD chart "We raise our 2026-27 volume forecasts as Hesai continues to gain share amid growing LiDAR adoption in China," Hsiao wrote. "More overseas projects could enhance ASP/margin, while project wins from robo-players could also fuel a second revenue growth driver and lead to potential re-rating." In the Sunday note, Hsiao specified that one reason he was raising his volume forecasts was due to continuous domestic volume share gain. Hesai's volume share continued to rise among suppliers, reaching 37% in May 2025 versus 22% in May 2024. "Despite intensifying competition among Chinese EV players amid a challenging macro environment, LiDAR adoption continues to grow at an unprecedented rate, as more than 1 in 5 NEVs sold in China in May were equipped with LiDAR," Hsiao added. "With near-term headwinds — Li Auto's 2Q volume guidance cut, BYD's sluggish God's Eye model sales — largely reflected in Hesai's share price, we see further volume upside from Xiaomi, Leap Motor, as well as wallet share gain in BYD." The analyst also expects LiDAR adoption to rise as the adoption of L2+ smart driving rises overseas, with Hsiao predicting penetration to reach 15% to 20% in ex-China regions by 2030. Like the existing China market, Hsiao expects that by 2030, it could become a standard safety specification in any vehicles priced above $30,000. Another catalyst also comes in the form of a growing robotics business, he wrote. Potential products that could fit in this category include lawnmowers and humanoids. "We expect robotaxis and smart home robotic appliances to serve as Hesai's second revenue growth driver from 2026 onwards," he added. "In fact, we expect much higher ASP/margin profile from robotaxi players (given more LiDAR units per car), and a TAM of US$5bn for the humanoid/smart home robotics market."
