7 of my favorite upgrades in the all-new Roomba robovacs – plus 2 I'm worried about
It's a big day for iRobot. The brand behind what used to be the best robot vacuums in the business has scrapped almost its entire fleet of Roombas and replaced it with five brand new bots. The new lineup introduces some fairly major upgrades that should hopefully once again make iRobot the formidable player it once was in the robot vacuum world.
Here's a rundown of the features I'm most excited about in the new Roomba range, plus a couple of developments I'm less sold on.
It's taken iRobot far too long to get on board with LiDAR, but better late than never. LiDAR is basically the industry standard form of robot vacuum navigation, and generally agreed to be far better than the older SLAM method found in iRobot's old bots. Its introduction means the new Roombas should offer faster, more reliable navigation and mapping. There are more practical benefits too – it means the robot can navigate in the dark, for instance, rather than requiring a light source. (Head to our LiDAR vs VSLAM article for more on how the two technologies compare.)
In line with the upgraded aesthetic, none of the new combination robots feature the retracting mop pad that until now had been iRobot's calling card. In its place on the 'Plus' models (the 405 and 505) are two rotating disc-shaped pads – the approach favored by much of the market now, and the one that has generally proven more efficient at cleaning in our reviews.
One can even kick out to one side to offer more efficient edge mopping – a feature included in some premium competitor models. The mop pads can lift up to 1cm to traverse over rugs or carpet, and the retracting static pad is still present on the Combo 10 Max for those who are still concerned about damp carpets.
Note that this improved mopping setup isn't present on the basic Roombas (the 105 and 205), which simply have a static, D-shaped mop pad. They do, however, come with automatic carpet detection, which means they shouldn't try and mop your rugs.
It's less of an essential, I guess, but I'm also a big fan of how the new lineup looks. Robot vacuums in general are quite generic looking these days, and iRobot has recognized that perhaps shiny black or white plastic isn't everyone's aesthetic of choice. The new bots have a design the brand has dubbed 'GRID' – Geometric, Rational, Iconic and Dynamic.
That might be overselling it a bit, but I do think the mix of matte and shiny finishes looks friendlier and more likely to fit in with softer home decor than your average bot. I also appreciate that iRobot has gone out of its way to create a look that's distinctive to the brand – in that way, it's a step ahead of the competition.
For some people, 'dust management' might not seem especially exciting. Well, I write about vacuum cleaners as a big chunk of my job, and I suffer from a dust allergy, so I guess I'm more invested than most. There are a couple of interesting developments here.
The first is that the dust bag in the auto-empty dock can automatically seal itself when it's full – great news for allergy sufferers, because there's now basically zero opportunity for the allergens to sneak their way back out into the air once they've been sucked up.
The second is that one of the bots – the Roomba 205 DustCompactor Combo – is designed to compress the dust in its onboard bin. That means it can hold far more debris than usual, without the need for a bulky dock. For people with small homes and no space for a massive auto-empty dock, it looks very interesting indeed.
I didn't have huge complaints about iRobot's original app, but the brand has rebooted it to go with its shiny new bots, and the new-and-improved one looks even better.
You can set custom cleaning routines, get estimates for how long the current task will take to clean, and access insights into the rooms that need most attention. Because we've now got LiDAR, it's also possible to watch your bot as it goes about its cleaning routine, rather than having to guess where it is and what it's up to.
This one is small, but significant for the customer experience: iRobot will hopefully once again share the maximum suction power of each model, in Pascals. This is something the brand stopped doing a while ago, claiming it's not the be-all-and-end-all, and that things like the roller design play a huge part in how well a robot cleans.
While they're not wrong there, it's still a very useful guide to how sucky a bot might be, and without suction specs it was difficult to make sense of the Roomba range, and even trickier to place its models within the wider market.
I say 'hopefully', because while this was part of my initial briefing, the marketing materials I've received since don't have suction specs. Instead, they say things like "70X more suction" (that's compared to the Roomba 600 series, which launched over a decade ago). Sigh.
Based on my initial notes, the new models have 7,000Pa of suction. That's not quite up there with the competition, but still a decent amount for the prices iRobot is charging. Combined with an efficient design (we've always been fans of iRobot's dual rollers), may well be plenty to provide a good maintenance clean for the average household.
Another overdue upgrade, in terms of customer-friendliness, is that iRobot has rethought its naming conventions. The new fleet is separated into Roomba, Roomba Plus, and Roomba Max models, following a good > better > best setup so you might actually have an idea how the lineup compares.
There might be some confusion with those who remember that in the old system, 'Plus' meant there was an auto-empty dock, whereas here it does not mean that. Overall, though, I far prefer this to the mess of j-something, i-somethings – hold on, is that an i or a j anyway? – that preceded it.
The LiDAR here is called 'ClearView' and appears across all models. Interestingly, iRobot has removed the raised puck on the 205 DustCompactor Combo, to give a more streamlined design. This model uses the same LiDAR technology, but it's shifted into the front of the robot. The issue is, the puck is there for a purpose; to enable the bot to 'see' all around, and navigate accurately. Shifting the LiDAR tech into the front of the robovac means a far narrower field of view.
Other brands are also experimenting with removing the puck, but all those I've come across have introduced new technology to compensate for that more limited field of view. For instance, the Dreame X50 Ultra Complete and Roborock Saros 10 (reviews incoming) have a puck that can retract into the body of the robot when it approaches an area of limited height, but will pop back up when space allows.
The Roborock Qrevo Slim and Saros 10R do away with a puck entirely, but for this the brand has engineered a whole new navigation method entirely, called StarSight, to ensure navigation isn't compromised. I'm no engineer, but surely they wouldn't be going to all that trouble if you could just chop the puck off with no impact.
The iRobot spokesperson I chatted with assured me there would be no compromise in navigation accuracy – they told me they were testing two bots, one with the puck and one without, and they were both behaving the same way. I'll be really interested to test this out and see for myself.
My other slight misgiving is that the current 'Max' segment consists only of the Combo 10 Max. It only launched in July 2024, so perhaps iRobot felt it was too soon to scrap it. However, as what should be the shining star of the Roomba fleet, it's underwhelming.
It was generally not well received – we awarded it a less-than-ideal 3 stars in our Roomba Combo 10 Max review, with our tester complaining of painfully slow mapping (no LiDAR here) and sub-standard mop cleaning. Both of these aspects have been improved on in the new Plus models, which look far more promising to me.
Overall, though, it's promising news from iRobot, and I appreciate that the brand has been bold enough to accept that what it was doing wasn't working, and go for a big reboot. I'm excited to get these new models into my flat and test the new features out for myself.
How to choose a robot vacuum: what to look for
6 weird and wonderful robot vacuum innovations from CES 2025
Browse the best budget robot vacuums you can buy

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
an hour ago
- Yahoo
Intel's new Core Ultra 120 will be DOA if stores sell them at anything like these prices
When you buy through links on our articles, Future and its syndication partners may earn a commission. I'm a big fan of little, cheap processors for gaming, so when Intel stealthily announced the specifications for its six-core, 12-thread Core Ultra 120/120F processors, I was really looking forward to seeing them on retailers' shelves. Unfortunately, the first prices for them have just dropped, and Raptor Lake Regurgitated is anything but cheap, weighing in nearly three times more than an equivalent AMD chip. The first I learned of the Intel Core Ultra 120 was from a post on X by user Momomo_us. Delving into Intel's processor database tells us everything we need to know about the new CPU: it's a Raptor Lake-based chip but with all its E-cores completely disabled. That means you just get six P-cores, with 12 threads in total. Add in a boost clock of 4.5 GHz, 18 MB of L3 cache, and a 65 W base power limit, and you've got Intel's version of a Ryzen 5 9600X. Except you haven't, because while the 9600X uses AMD's latest Zen 5 architecture, the Core Ultra 120 is actually a marginally faster Core i5 12400. Yes, that's right: it's Alder Lake, not Raptor Lake. The telltale clue is the fact that the total L2 cache is 7.5 MB—1.25 MB per core—whereas a true Raptor Lake chip would sport 12 MB (2 MB apiece). This means that the 120 is really Intel's version of the Ryzen 5 5500. So Intel has taken some duff old chips from 2022 and repackaged them as something new. I honestly have no problem with that, as long as the price reflects the aged architecture and the total lack of E-cores. Well, thanks to another post by Momomo_us on X, it would seem that somebody at Intel forgot to look up what cheap means. I don't know what distributor the user has listed, but at $246.01 for the Core Ultra 120 and $216.66 for the iGPU-less 120F, there's a snowball's chance in hell that I'd recommend anyone to buy one at these prices. You can pick up a slower-but-still-six-core Ryzen 5 5500 is a mere $73 at Amazon. I don't care how good Intel's P-cores are; there's no way that they're worth three times more than AMD's Zen 4 cores. To make matters worse, you can get a Core i5 12400 for $144 at Amazon. Hopefully, those distributor prices are just placeholders and not the final price tags, because if they are, Intel isn't going to shift a single one of them. Shame really, as I'd hope that Intel's plans for its E-coreless Raptor Lake chips were going to involve something cheap and gamer-friendly. What we've actually been 'treated' to is a pile of regurgitated tat. Gosh, aren't we the lucky ones?
Yahoo
2 hours ago
- Yahoo
I just tried the new Samsung DeX on the Galaxy Z Flip 7 to replace my laptop — here's the good and the bad
When you buy through links on our articles, Future and its syndication partners may earn a commission. Last year when Samsung launched its foldable phones, it was a no-brain decision on which one I wanted to make my new daily driver. Since it offered support for Samsung DeX, I chose the Galaxy Z Fold 6 without hesitation over the Galaxy Z Flip 6. In fact, I even managed to ditch my laptop for 2 weeks with the Z Fold 6. Samsung has long neglected to bring DeX to its flip-style phones, but that all changed this year with the reveal of the Galaxy Z Flip 7 — and I couldn't be more thrilled about it. Ever since the first Flip, I've been wanting to use one as my daily driver, but no support for DeX was a big dealbreaker. In my Galaxy Z Flip 7 hands-on, I say how it feels like perfection due to the bigger upgrades it's been given over previous years. I've been testing out the new Samsung DeX for the last few days now, so here's the good and bad about it. The Good Samsung DeX has been a long time coming for the Galaxy Z Flip line, so needless to say I'm stoked for its arrival. First and foremost, Samsung DeX on the Galaxy Z Flip 7 supports either a wired or wireless connection. I'd recommend the former since I've seen some latency issues whenever I connected it to my Amazon Fire TV OMNI. Just like DeX running on other new phones, like my Galaxy S25 Ultra and Galaxy Z Fold 6, I get access to that PC-like desktop experience that lets me run multiple apps simultaneously. It makes me almost as productive as using my Windows 11 laptop, complete with the ability to have apps running side-by-side with one another. When I do this, I can even resize one of the windows and the other will dynamically adjust to fill out the rest of the screen. Image 1 of 3 Image 2 of 3 Image 3 of 3 Apart from the new set of wallpapers included with this version of DeX, which is running on top of One UI 8, there's nothing visually or functionally different. The bottom left corner of the task bar has buttons for the home, back, and recent apps; the middle packs buttons for the apps panel, pinned apps, and opened apps; and the icons on the right lets me access different settings. I've even connected my Galaxy Z Flip 7 to my Xreal Air 2 Pro glasses for that private experience when I'm in a public space. The beauty of Samsung DeX in this particular situation is that I can continue to use DeX even when my phone's turned off. Unlike the traditional screen mirroring feature in many of today's best phones, it's a totally separate experience from my phone — so I can even watch something on Netflix without the need to keep my phone on. The Bad As much as I'm thankful for the utility that Samsung DeX brings to my Galaxy Z Flip 7, I was hoping for Samsung to bring new features and changes. Just not long ago, Google revealed how it was building a desktop mode for Android 16 with help from Samsung, but it doesn't influence the DeX experience on the Galaxy Z Flip 7. Considering how it's running One UI 8 on top of Android 16, I was hoping for bigger changes with the experience. Unfortunately, the bad thing about DeX on the Galaxy Z Flip 7 is that Samsung does nothing to refine it — and I think it's a big missed opportunity — much like the sentiments I had when I tried DeX on the Galaxy S25 Ultra earlier this year. Image 1 of 3 Image 2 of 3 Image 3 of 3 Samsung's the only one who's really offering this kind of feature, even though Motorola has something similar with its Smart Connect feature in some of its phones like the Razr Ultra (2025). The difference is that DeX can run through a wired connection, whereas Smart Connect is exclusively a wireless one. One particular feature I was hoping to see would be something along the lines of Snap Layouts with Windows 11, which would allow for better snapping between the open windows. You're only able to snap two windows at one time, leaving others to float on their own. This continues to be my biggest criticism about DeX because it has the potential to make me more productive if it could do this, but it doesn't. Follow Tom's Guide on Google News to get our up-to-date news, how-tos, and reviews in your feeds. Make sure to click the Follow button. Bottom Line Despite the lack of anything new, Samsung DeX on the Galaxy Z Flip 7 is a big deal. Although I'm disappointed by the lack of innovation around it, there's still time for Samsung to work on it with subsequent updates. It's one of those features you can't appreciate until you begin to use it and realize how much it can satisfy your daily routine. More work is obviously needed before it can totally replace my laptop, but I can tell you from experience how helpful it is to use as a fallback. I like to travel as light as possible, and given the compact size of the Galaxy Z Flip 7 over the Z Fold 7, it proves a point that you can still have the power of a computer in your pocket. More from Tom's Guide Galaxy Z Fold 7 vs. Honor Magic V5: Which foldable will win? iPhone 17 Air — here's what Apple could learn from Samsung's thin phone releases Samsung Galaxy Z Fold 7: 5 reasons to buy (and 3 reasons to skip)
Yahoo
2 hours ago
- Yahoo
iOS 26 Liquid Glass icons — how to get the stunning new look on your iPhone
When you buy through links on our articles, Future and its syndication partners may earn a commission. iOS 26 introduces Liquid Glass icons, one of Apple's biggest design changes in over a decade. These new transparent icons give your iPhone's homescreen a translucent, minimalist look that lets your wallpaper show through. Instead of the usual solid app icons, Liquid Glass creates a layered effect that adapts to your surroundings and changes between light and dark environments automatically. The feature is available now in the iOS 26 public beta and will roll out to everyone when the final version launches later on this year. Setting up Liquid Glass icons is straightforward and only takes a few taps in your settings. Whether you want a completely clear look or prefer to keep some color, you can customize the transparency level to match your aesthetic. Here's how to enable Liquid Glass icons on your iPhone. 1. Download iOS 26 public beta first (Image: © Tom's Guide) You'll need iOS 26 Beta installed on your iPhone to access Liquid Glass icons. Since the feature is currently only available in the public beta, you'll need to download that version first. The full iOS 26 release is expected in September, but the beta gives you early access to test the new design. Make sure your iPhone is compatible with iOS 26 before attempting to download the beta software. 2. Access the homescreen customization menu (Image: © Tom's Guide) Long-press anywhere on your iPhone's homescreen or lockscreen until you see options appear. Tap the Edit button that appears in the top-left corner of your screen, then the Customize menu option. This opens the menu where you can change your homescreen appearance and access the new Liquid Glass options. 3. Select your preferred Liquid Glass style (Image: © Tom's Guide) There should now be a menu at the bottom of your screen showing Light, Dark, Tinted, and Clear options. Tap Clear to access the Liquid Glass settings. This is where you'll find all the transparency options for your app icons. 4. Switch between Liquid Glass modes (Image: © Tom's Guide) Select from the three Liquid Glass options: Clear Light, Clear Dark, or Clear Auto. Clear Light makes icons completely transparent, while Clear Dark keeps some original colors with the glass effect. Choose Clear Auto to automatically switch between light and dark modes based on the time of day. 5. Change back to regular icons anytime (Image: © Tom's Guide) To return to normal app icons, repeat the same steps by long-pressing your homescreen, tapping Edit, and selecting Default. You can experiment with different looks until you find what works best for your wallpaper and personal style. Follow Tom's Guide on Google News to get our up-to-date news, how-tos, and reviews in your feeds. Make sure to click the Follow button. More from Tom's Guide How to speed up your iPhone by clearing its cache The Apple Watch just got an AI fitness coach — how to enable it Stop deleting your photos — these iPhone settings save space instantly