Kanazawa University research: High-speed AFM and 3D modelling help towards understanding the dynamics of a protein implicated in several cancers
KANAZAWA, Japan, June 11, 2025 /PRNewswire/ -- Researchers at the Nano Life Science Institute (WPI-NanoLSI), Kanazawa University observe and model how the enzyme ADAR1 interacts with double-stranded RNA, which may be useful for future cancer treatment strategies.
An enzyme type noted in several cancers is the family of adenosine deaminases acting on RNA (ADARs). These enzymes convert adenosines in double-stranded RNA (dsRNA) into inosines, which cells read as guanosines. As such, ADARs can contribute to changes in protein-coding sequences and diminish the robustness of various RNA processes. Studies have shown that silencing one type of ADAR – ADAR1 – can prevent cancer proliferation and sensitize cancers to immunotherapy, suggesting that they could be a promising target for cancer treatments.
However, so far, it has been difficult to pin down information on the structural dynamics of ADAR1 due to its size and complexity. Now, researchers led by Madhu Biyani at Kanazawa University, WPI-NanoLSI, Yasuhiro Isogai at Toyama Prefectural University, and Manish Biyani at Ishikawa Create Labo and Kwansei Gakuin University have combined high-speed atomic force microscopy (HS-AFM) and 3D modelling to shed light on the enzyme's conformations and interactions with dsRNA.
Like many proteins, ADAR1 functions through changes in its conformation. However, most experimental techniques for determining protein structure, as well as 3D modelling algorithms, give static or average conformations that obscure the structural dynamics so important to the protein's function. Combining 3D modelling with HS-AFM proved helpful in shedding light on these dynamic aspects of ADAR1.
The researchers first used 3D modelling based on the machine learning algorithm AlphaFold2 to predict the conformations of the enzyme and noted that it could take the form of monomers, dimers, trimers, and tetramers. HS AFM observations, as well as theoretically simulated HS AFM, supported these initial conclusions regarding the possible oligomer formations.
The researchers then looked at the conformations the enzyme formed in the presence of double-stranded RNA (dsRNA). In particular, the researchers focused on a certain aryl hydrocarbon receptor 3'UTR mRNA as the target for ADAR1, since this receptor is known to be involved in the metabolism of substances alien to the body at those points. Observations of the dsRNA with HS-AFM not only agreed with previous structural studies but were able to provide insights into the structure of the target region in particular.
Thanks to the speed and resolution of the HS-AFM image capture, the researchers were able to identify different conformations in the proteins that seemed to relate to distinct phases of the deaminizing process. In their report of the work, the researchers explain how ADAR1 first "searches" for the dsRNA and on "recognizing" it, adopts a flexible conformation as it approaches. The enzyme then engages in what the researchers describe as "capture" of the dsRNA backbone, for which the conformation transitions to something more stable and "anchor-like". The researchers highlight the role of dsRNA binding domains (dsRBDs) to stabilize the interaction with the dsRNA at this stage. They also note "a visibly large interfacial interaction between the deaminase domains, forming a dimer" as the enzyme dimer loops out on the dsRNA. The enzyme subsequently scans the RNA and dissociates to search for adenosine sites to convert.
"These observations suggest that the dsRBDs are critical for initiating interactions between the deaminase domains, thereby promoting the formation of a stable, functional dimeric complex capable of efficiently binding and catalyzing the editing of dsRNA substrates," the researchers conclude in their report, thereby flagging the insights this study offers for further work towards possible cancer therapeutics.
The researchers further propose future studies to compare ADAR1 and ADAR2, and to perform mutation analyses to clarify how ADAR1 dimerization influences A-to-I RNA editing, ultimately aiming to develop effective ADAR1 inhibitors.
Figure 1: Three-dimensional modeling analysis of ADAR1 oligomerization.https://nanolsi.kanazawa-u.ac.jp/wp/wp-content/uploads/Fig.-1_Nat.-Commun._Jun.-2025.jpg© 2025 Biyani, et al., Nature Communications
Figure 2: Simulated AFM images of ADAR1 oligomerization.https://nanolsi.kanazawa-u.ac.jp/wp/wp-content/uploads/Fig.-2_Nat.-Commun._Jun.-2025.jpg© 2025 Biyani, et al., Nature Communications
Glossary
Atomic force microscopy
This imaging technique uses a nanosized tip at the end of a cantilever that is scanned over a sample. It can be used to determine the topography of a sample surface from the change in the strength of forces between the tip and the sample with distance, and the resulting deflection of the cantilever. It was first developed in the 1980s, but a number of modifications have augmented the functionality of the technique since. It is better suited to imaging biological samples than the scanning tunnelling microscope that had been previously developed because it does not require a conducting sample.
In the 2000s, Toshio Ando at Kanazawa University was able to improve the scanning speed to such an extent that moving images could be captured. This allowed people to use the technique to visualize dynamic molecular processes for the first time.
ADARs
Adenosine deaminases acting on RNA (ADARs) convert adenosine to inosine, which is interpreted by cells as guanosine. This editing can influence alternative splicing, miRNA processing, double-stranded RNA stability, and protein-coding sequences. In mammals, there are two known ADARs responsible for adenosine to inosine RNA editing – ADAR1 and ADAR2. Notably, overexpression and increased activity of ADAR1 have been observed in cancers of the liver, breast, esophagus, prostate, and bone marrow.
3D modelling
Several techniques are now available for protein structure prediction. In this study, the researchers used AlphaFold2 to model the structure of human ADAR1. Due to disorder regions in the N-terminal 822 residues, the final model focused on residues 823-1226, which encompass the deaminase domain. This monomer model served as the basis for building higher-order structures—dimer, trimer, tetramer, and polymer by superimposing it onto the ADAR2 dimer structure (PDB ID:1ZY7) through sequence alignment. Since determining ADAR1's full structure is challenging due to its size and complexity, the better-characterized ADAR2 provided a template to generate ADAR1 multimer models.
Reference
Madhu Biyani, Yasuhiro Isogai, Kirti Sharma, Shoei Maeda, Hinako Akashi, Yui Sugai, Masataka Nakano, Noriyuki Kodera, Manish Biyani, Miki Nakajima, High-speed atomic force microscopy and 3D modeling reveal the structural dynamics of ADAR1 complexes, Nature Communications 16, 4757 (2025).
DOI:10.1038/s41467-025-59987-6
URL: https://www.nature.com/articles/s41467-025-59987-6
Funding and AcknowledgementsFinancial support from the Grants-in-Aid for Scientific Research (C), KAKENHI, Japan Society for the Promotion of Science (JSPS) (23K06067 to MadhuB), and the World Premier International Research Center Initiative (WPI), MEXT, Japan, are gratefully acknowledged. The authors thank Prof. Toshio Ando, Dr. Kenichi Umeda, Ms. Wei Weilin, Ms. Aimi Makino, and Ms. Kayo Nagatani for their technical support of HS-AFM experiments.
Contact
Kimie Nishimura (Ms)Project Planning and Outreach, NanoLSI Administration OfficeNano Life Science Institute, Kanazawa UniversityEmail: nanolsi-office@adm.kanazawa-u.ac.jpKakuma-machi, Kanazawa 920-1192, Japan
About Nano Life Science Institute (WPI-NanoLSI), Kanazawa UniversityUnderstanding nanoscale mechanisms of life phenomena by exploring "uncharted nano-realms".
Cells are the basic units of almost all life forms. We are developing nanoprobe technologies that allow direct imaging, analysis, and manipulation of the behavior and dynamics of important macromolecules in living organisms, such as proteins and nucleic acids, at the surface and interior of cells. We aim at acquiring a fundamental understanding of the various life phenomena at the nanoscale.https://nanolsi.kanazawa-u.ac.jp/en/
About the World Premier International Research Center Initiative (WPI)The WPI program was launched in 2007 by Japan's Ministry of Education, Culture, Sports, Science and Technology (MEXT) to foster globally visible research centers boasting the highest standards and outstanding research environments. Numbering more than a dozen and operating at institutions throughout the country, these centers are given a high degree of autonomy, allowing them to engage in innovative modes of management and research. The program is administered by the Japan Society for the Promotion of Science (JSPS).
See the latest research news from the centers at the WPI News Portal:https://www.eurekalert.org/newsportal/WPIMain WPI program site: www.jsps.go.jp/english/e-toplevel
About Kanazawa UniversityAs the leading comprehensive university on the Sea of Japan coast, Kanazawa University has contributed greatly to higher education and academic research in Japan since it was founded in 1949. The University has three colleges and 17 schools offering courses in subjects that include medicine, computer engineering, and humanities.
The University is located on the coast of the Sea of Japan in Kanazawa, a city rich in history and culture. The city of Kanazawa has a highly respected intellectual profile since the time of the fiefdom (1598-1867). Kanazawa University is divided into two main campuses: Kakuma and Takaramachi for its approximately 10,200 students, including 600 from overseas.http://www.kanazawa-u.ac.jp/en/
View original content:https://www.prnewswire.com/news-releases/kanazawa-university-research-high-speed-afm-and-3d-modelling-help-towards-understanding-the-dynamics-of-a-protein-implicated-in-several-cancers-302478841.html
SOURCE Kanazawa University
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
3 hours ago
- Yahoo
Japan launches flagship H2A rocket for 50th and last time
Japan launched the country's flagship H2A rocket for the 50th and last time from the Tanegashima Space Centre Saturday. The rocket is carrying a satellite to monitor greenhouse gas emissions.

Yahoo
6 hours ago
- Yahoo
Japan launches a climate change monitoring satellite on mainstay H2A rocket's last flight
TOKYO (AP) — Japan on Sunday launched a satellite to monitor greenhouse gas emissions using its mainstay H-2A rocket, which made its final flight before it is replaced by a new flagship designed to be more cost competitive in the global space market. The H-2A rocket successfully lifted off from the Tanegashima Space Center in southwestern Japan, carrying the GOSAT-GW satellite as part of Tokyo's effort to mitigate climate change. The satellite was released into orbit about 16 minutes later. Mitsubishi Heavy Industries, which operates the rocket launch, and Japan Aerospace Exploration Agency, will hold a news conference later Sunday to give further details of the flight. Sunday's launch marked the 50th and final flight for the H-2A, which has served as Japan's mainstay rocket to carry satellites and probes into space with a near-perfect record since its 2001 debut. After its retirement, it will be fully replaced by the H3, which is already in operation, as Japan's new main flagship. The launch follows several days of delays because of malfunctioning of the rocket's electrical systems. The GOSAT-GW, or Global Observing SATellite for Greenhouse gases and Water cycle, is a third series in the mission to monitor carbon, methane and other greenhouse gasses in the atmosphere. It will start distributing data in about one year, officials said. The liquid-fuel H-2A rocket with two solid-fuel sub-rockets developed by Japan Aerospace Exploration Agency has so far had 49 flights with a 98% success record, with only one failure in 2003. Mitsubishi Heavy Industries has provided its launch operation since 2007. H-2A successfully carried into space Japan's moon lander SLIM last year, and a popular Hayabusa2 spacecraft in 2014 to reach a distant asteroid, contributing to the country's space programs. Japan sees a stable, commercially competitive space transport capability as key to its space program and national security, and has been developing two new flagship rockets as successors of the H-2A series — the larger H3 with Mitsubishi, and a much smaller Epsilon system with the aerospace unit of the heavy machinery maker IHI. It hopes to cater to diverse customer needs and improve its position in the growing satellite launch market. The H3, is designed to carry larger payloads than the H-2A at about half its launch cost to be globally competitive, though officials say more cost reduction efforts are needed to achieve better price competitiveness in the global market. The H3 has made four consecutive successful flights after a failed debut attempt in 2023, when the rocket had to be destroyed with its payload. Mari Yamaguchi, The Associated Press Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
6 hours ago
- Yahoo
Rocket Lab launches Japanese Earth-observing radar satellite to orbit
When you buy through links on our articles, Future and its syndication partners may earn a commission. Rocket Lab launched an Earth-observing radar satellite to orbit for the Japanese company iQPS on Wednesday morning (June 11). An Electron rocket topped with the QPS-SAR-11 spacecraft lifted off from Rocket Lab's New Zealand site on Wednesday at 11:31 a.m. EDT (1531 GMT; 3:31 a.m. on June 12 local New Zealand time). The Electron did its job, deploying the satellite into a circular orbit 357 miles (575 kilometers) above Earth roughly 51 minutes after launch as planned. Rocket Lab called this mission "The Mountain God Guards." That's a reference to the QPS-SAR-11 satellite's nickname, Yamatsumi-1, which honors a Japanese god of the mountains. Yamatsumi-1 will join iQPS' synthetic aperture radar (SAR) constellation, which views targets on Earth in all weather conditions, day and night. "To date, 10 QPS-SAR satellites have been launched, and iQPS aims to establish a constellation of 36 satellites," Rocket Lab wrote in a mission description, which you can find here. "This will enable the delivery of a 'NearReal-Time Data Provisioning Service,' allowing for the observation of specific regions worldwide at an average interval of 10 minutes," the company added. "This will make it possible to collect continuous images as data, and to accumulate data not only on 'Stationary Objects' such as land and buildings, but also on 'Moving Objects' such as vehicles, ships, and cattle and livestock." Related Stories: — Rocket Lab launches new NASA solar sail tech to orbit (video, photos) — Rocket Lab launches private Earth-observing radar satellite to orbit (video, photos) — Rocket Lab launches 5 'Internet of Things' satellites to orbit (video) "The Mountain God Guards" was the the eighth mission of 2025 and 66th overall flight for the 59-foot-tall (18-meter-tall) Electron, which gives small satellites dedicated rides to orbit. Rocket Lab has now launched four missions for iQPS (which is short for "Institute for Q-shu Pioneers of Space"), and there are more to come: Today's flight was the third of eight contracted missions for iQPS expected to lift off in 2025 and 2026, according to Rocket Lab. Editor's note: This story was updated at 12:35 p.m. ET on June 11 with news of successful satellite deployment.