Researchers accomplish 'pivotal step' on quest to create new-age solar panels: 'We are honored to contribute'
The findings were published in Optical and Quantum Electronics.
Solar panels are made of individual solar photovoltaic cells, or solar cells, which contain the technology to convert the photons from sunlight into electricity.
According to the Department of Energy, the main semiconductor material favored and used in most solar cells is silicon due to the element's abundance on Earth and silicon's high efficiency in converting light into energy. Silicon solar cells dominate the market, representing 95% of all solar modules sold.
An up-and-coming type of solar cell is perovskite cells — a type of thin-film solar cell "built with layers of materials that are printed, coated, or vacuum-deposited onto an underlying support layer, known as the substrate," per the Department of Energy. These layers help the solar cell absorb light, separate charge particles, and create an electrical circuit, allowing electricity to flow.
The potential to create perovskite layers with printing technology makes this solar cell economically attractive for the solar industry, helping to lower solar production costs. Perovskite solar cells are also highly efficient at converting light into energy — comparable to silicon cell technology.
It's why scientists have been iterating this thin-film solar in the lab, achieving over 20% improved efficiency progress in the last decade.
One flaw, however, is that the most common type of perovskite used in perovskite solar cells is lead halide perovskites, according to Solar Magazine.
Lead halide perovskites can contaminate the environment, leaching lead into the ground, and affect plants and crops, affecting local ecosystems and the larger food chain. Lead toxicity in humans can lead to anemia and high blood pressure in adults, and interfere with brain development and hearing in children.
Motivated to replace lead halide perovskites with an alternative and sustainable material, the researchers at the Autonomous University of Querétaro toyed with a chalcogenide perovskite — (Ca,Ba)ZrS3 — composed of calcium (Ca), barium (Ba), zirconium (Zr), and sulfur (S).
Which of these factors is the biggest obstacle preventing you from getting solar panels?
The upfront cost
The way they look
Not sure where to start
No concerns here!
Click your choice to see results and speak your mind.
This perovskite has strong thermal and chemical stability, as relayed by Tech Xplore, and has a bandgap that can be fine-tuned to fall within the "sweet spot" for solar energy — reaching 1.26 eV. The ideal bandgap range for photovoltaic material is 1 - 1.8 eV, according to a Joule article.
The researchers paired this perovskite with advanced inorganic spinel hole transport layers, which help move positively charged particles, or "holes," in solar cells to where they need to go in the electrical circuit to produce the flow of electricity.
Testing the performance of this perovskite solar cell, the researchers found that they were able to improve the power conversion efficiency "to an impressive rate of over 34% by meticulously engineering layer thickness, carrier concentration, and interface properties."
Feasible perovskite solar cells could drastically lower the production cost for solar, passing on the cheaper rate to consumers and making cleaner energy more accessible.
Transitioning to solar also helps reduce global dependence on dirty energy, which contributes to heat-trapping gases that raise global temperatures and cause extreme weather events. Accessible solar will also improve air quality, which lowers the risk of respiratory illnesses and related health issues.
"The future of solar energy is being reshaped, and we are honored to contribute to this promising transformation," said Latha Marasamy, one of the study's researchers.
Join our free newsletter for weekly updates on the latest innovations improving our lives and shaping our future, and don't miss this cool list of easy ways to help yourself while helping the planet.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
12 hours ago
- Yahoo
How Trump's megabill could slow AI progress in US
The elimination of federal renewable energy tax credits in Trump's One Big Beautiful Bill Act has major implications for the global AI race. Ultimately, the shift means slowing down US progress on new energy production, which is key to winning the technology Cold War with China. There is no possible way tech companies can power the massive rollout of AI factories without solar, and now it will be that much more expensive. But the attempt to throw a lifeline to the fossil fuel industry could be too little, too late, as detailed in this New Yorker article by Bill McKibben. The rate of solar adoption is now about a gigawatt every 15 hours. A gigawatt is the output of a typical nuclear power plant. Solar isn't just cheaper than fossil fuels. It's also faster to deploy, which is crucial in the AI race. The expansion of AI data centers is creating new economic incentives for innovation in renewables, from geothermal to fusion to new battery chemistries, which can store all that new solar power. It's a topic I expect we'll be covering more and more here in the coming months.
Yahoo
4 days ago
- Yahoo
Texas project to build four nuclear plants is in talks with 'hyperscalers'
By Timothy Gardner WASHINGTON (Reuters) -Fermi, a Texas company looking to build four nuclear plants next to a U.S. nuclear weapons complex, said in documents revealed on Tuesday that it is talking with large data managers on leasing agreements for the project. Fermi, co-founded by Rick Perry, a former U.S. energy secretary, wants to build four AP1000 reactors at a facility it is calling a "hypergrid." The up to 11 gigawatt (GW) facility in Amarillo powered by nuclear, natural gas, and renewable energy, is planned near the Department of Energy's Pantex nuclear weapons plant and in partnership with Texas Tech University. Fermi said in its application at the Nuclear Regulatory Commission, which the regulator made public on Tuesday, that it is engaging in talks with many Big Tech companies, known as "hyperscalers," on letters of intent and term sheets, or preliminary documents that are usually non-binding. The application said that the hyperscalers would be tenants, apparently meaning they would not own part of the plants. Fermi did not immediately answer questions about financial arrangements being discussed with Big Tech companies or which or how many hyperscalers it is in talks with. The last two reactors built in the U.S. were AP1000, completed in Vogtle, Georgia. They cost a total of more than $30 billion, according to the U.S. Energy Information Administration. Those plants were delayed by years and came in billions of dollars above projected costs. But nuclear backers say lessons learned should cut construction time and final costs of the next AP1000 reactors. Fermi said in the application that the nuclear complex, which it calls the Donald J. Trump Generating Plant, will be eligible for financing from the Department of Energy's Loan Programs Office. The only time the president tapped the LPO in his first term was for the Vogtle plants. The company said other plans to finance construction and operation include equity capital contributions from institutional infrastructure and real estate investors, structured bond offerings, and clean energy tax credits.
Yahoo
4 days ago
- Yahoo
Turbine in Scotland hits ‘very significant milestone' in a breakthrough for tidal energy
Submerged in about 40 metres of water off Scotland's coast, a turbine has been spinning for more than six years to harness the power of ocean tides for electricity. It is a mark of durability that demonstrates the technology's commercial viability. Keeping a large, or grid-scale, turbine in place in the harsh sea environment for that long is a record that helps pave the way for bigger tidal energy farms. And that makes it far more appealing to investors, according to the trade association Ocean Energy Europe. Tidal energy technologies are still in the early days of their commercial development, but their potential for generating clean energy is big. According to the National Renewable Energy Laboratory, marine energy - a term researchers use to refer to power generated from tides, currents, waves or temperature changes - is the world's largest untapped renewable energy resource. The MeyGen tidal energy project off the coast of Scotland has four turbines producing 1.5 megawatts each, enough electricity collectively to power up to 7,000 homes annually. Swedish company SKF produced parts for the turbines at the MeyGen site off the Scottish coast. On Thursday, the group announced that its bearings and seals on one of the turbines had passed the 6 1/2-year mark without needing unplanned or disruptive maintenance. It has been working closely with the industry for a decade on design and testing. Achieving six years in the water with constant operations is a 'very significant milestone' that bodes well for the future of tidal energy, according to Rémi Gruet, CEO of Ocean Energy Europe. Tidal energy projects would be prohibitively expensive if the turbines had to be taken out of the water for maintenance every couple of years. Scotland and the United Kingdom are global leaders in tidal energy. The MeyGen site, operated by SAE Renewables, has been sending electricity to the grid for about eight years. There are very few tidal energy projects generating electricity continuously. Most have been tests and demonstrations, says Andrea Copping, an expert in marine renewable energy development. Copping, a distinguished faculty fellow in the School of Marine and Environmental Affairs at the University of Washington, adds that there are still large hurdles to overcome before tidal energy can be adopted more widely. These include dealing with regulatory issues, potential environmental effects and conflicts with other ocean users. Still, the Scotland project seems to have addressed the question of whether the turbines can last in seawater. 'I think they have checked the boxes,' she said. 'Because sceptics, and that includes investors of course and governments, said, 'How on Earth are you going to operate these things especially for any length of time in this very tough environment?' And that's what I think they proved.' It's very hard to take what is essentially a wind turbine normally found on land and put it under water, says Fraser Johnson, operations and maintenance manager at MeyGen. The record-setting turbine should keep going for at least another year before it needs to come out of the water for maintenance, he added. The four turbines are in the Inner Sound of the Pentland Firth, a narrow channel between the Scottish mainland and Stroma Island known for strong tidal currents. Tidal energy systems need strong currents to make electricity efficiently. MeyGen plans to add 20 turbines in 2030 to produce more electricity, after needed upgrades to the electricity grid are finished. The site could eventually hold as many as 130 turbines that are more powerful than those at the site today. Related Tidal energy could help the UK reach net-zero but is it too expensive? Riding the wave to a greener future: Is ocean power the solution? The MeyGen site is in the open water, while another type of tidal project involves creating a dam-like structure called a barrage across tidal waters. With four turbines, MeyGen is considered the largest tidal energy project of its kind worldwide, said Johnson. 'It's a title we wish we didn't have. We want more, we want others,' he said. 'Unfortunately others are having difficulty achieving what MeyGen has achieved. But working with SKF moving forward, we'll push the industry forward.'
