logo
Poor Countries Set To Pay $22billion For China Debt

Poor Countries Set To Pay $22billion For China Debt

Scoop05-06-2025
New research from the Lowy Institute shows the world's poorest countries will make record high debt repayments to China this year.
The research, released last month, showed China is set to call in US$22 billion for debts from 75 countries assessed by the World Bank as the world's poorest and most vulnerable in 2025.
Ten Pacific nations were on the list.
China's foreign ministry, meanwhile, denies Beijing is responsible for developing debt.
Lowy research author Riley Duke said China had shifted from lead bilateral banker to chief debt collector for the developing world.
"Because of the large amount of lending that China did in the mid-2010s, and the way it structured its loans through its Belt-and-Road initiative, this year, it is seeing a huge spike in repayments," he said.
For Pacific countries that had borrowed from China, Duke said repayment strain was already an issue. He identified Tonga, Samoa and Vanuatu as being at higher risk due to respective loans.
In Tonga, the impact of Chinese loans had been a "big political issue" this year. Duke anticipated that about 15 percent of the government's revenue over the next few years would be devoted to debt repayments.
"Last year, Tonga spent more on its debt repayments than it did on health for its citizens," he said.
"And so when we look at the….forward outlook, there are more challenges on the horizon. There are key development issues across the Pacific that countries and their governments and their people want to be dealing with.
"But instead, these debt burdens are there and they're persistent.
"Again, just to focus on Tonga…. [it] ran five successful budget surpluses in the lead-up to having a big wave of Chinese debt repayments coming in.
"But then it faced huge economic costs from the pandemic, from the earthquake, from cyclones, and so that wiped out all the money that [the government] had put aside."
Duke believed the amount of China's lending into the region was less than a quarter of the level it was in the mid-2010s.
"I'd be surprised to see any new large loans from China in the region, and I think related to that is the broader topic of whether Pacific countries should take on lots of debt.
"Pacific countries have large financing gaps. There's a lot of infrastructure that needs to be built, and sometimes loans are the best way to do that, and ultimately that just comes back to the quality of the project.
"People are a bit afraid of debt, and I think it's a bit…of a dirty word, but if a loan is taken out to finance a project that is good for economic growth, good for a Pacific country [because] it drives connectivity [and] it drives the economy, then it's a good loan, and it's good debt to take on, and it will pay itself back."
He said there had also been a shift in how China engaged with the region.
"China's main form of engagement with the Pacific 15 years ago was lending. I think 80 percent of all of China's development financing to the region was in the form of loans, and that's fallen off dramatically since around 2018."
That shift was due to a range of factors, including increased financing options for Pacific governments, Duke said.
"In 2010, China might have been the only partner offering large-scale infrastructure financing.
"Australia is now offering more financing in that space. The World Bank is offering more financing in that space; there's climate funds that are also offering adaptation projects and adaptation infrastructure.
"So there are more options on the table for Pacific countries than there was previously. And I think that is part of the reason that China's lending has declined."
China's foreign ministry denied Beijing was responsible for developing debt.
"China's cooperation on investment and financing with developing countries follows international practice, market principles, and the principle of debt sustainability," spokesperson Mao Ning said.
"A handful of countries are spreading the narrative that China is responsible for these countries' debt.
"However, they ignore the fact that multilateral financial institutions and commercial creditors from developed countries are the main creditors of developing countries, and the primary source of debt repayment pressure.
"Lies cannot cover truth and people can tell right from wrong."
Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

Brics may be losing its bite
Brics may be losing its bite

Otago Daily Times

time2 days ago

  • Otago Daily Times

Brics may be losing its bite

No-shows by key leaders at an annual summit underscored the difficulties of an international bloc that once sought to reshape world politics, James Kynge, of The Observer , writes. The annual summit of Brics, a growing world grouping seen as the Global South's answer to the G7, met in the Brazilian capital this week. But its two heaviest hitters stayed away. So what? Chinese President Xi Jinping and Russian President Vladimir Putin were absent at a time when the coalition faces the toughest test of its relevance since it was founded in 2009, even as it expands. The 11 members of Brics account for about 40% of global GDP, and their average growth rate remains significantly ahead of the rest of the world. But the Rio summit faced critical challenges including last year's addition of Iran, Egypt, Ethiopia, Saudi Arabia, the UAE and Indonesia, which has brought fresh divisions and entrenched old ones; wars in the Middle East and Ukraine; and Donald Trump's tariff threats. Xi's no-show. China is by far the largest Brics economy and styles itself as a leader of the developing world. So Xi not turning up for the first time in more than a decade, without a credible excuse, has to be seen as a downgrading of the importance Beijing accords the group. Lula's loss. Xi's absence was particularly felt by Brazil's President Luiz Inacio Lula da Silva, who has ambitions to bolster his country's leadership role within Brics and among developing countries seeking the democratisation of the international system. Putin's absence. Putin, Xi's closest ally in Brics, beamed in by video link to claim the liberal world order is "obsolete". He faced arrest if he travelled to Brazil in person since the country is part of the International Criminal Court, which has an outstanding warrant for Putin for the alleged abduction of thousands of Ukrainian children. Another Bric in the wall. The grouping called the bombing of Iran, one of its new faces, a "blatant breach of international law" but didn't mention the US or Israel by name — an indicator of the limited influence of Brics, which cannot back up statements with policies. Autocratic drift. The more than doubling of Brics membership last year, largely driven by China, drew concerns from members such as India and Brazil because it tilts the grouping much further towards autocracy. Among the new members, only Indonesia is a democracy, while Iran, Egypt, Saudi Arabia, Ethiopia and the UAE are authoritarian states in varying degrees. Competing loyalties. The Saudis and Emiratis, meanwhile, are staunch military allies of the United States, while India is also stepping up its defence partnerships with the West. This has further fragmented a bloc that was already struggling for cohesion. At a meeting in April, its foreign ministers failed to agree on a final statement. And yet. The grouping remains useful politically, especially to Russia. Its statement — signed off by two key US allies in Saudi Arabia and the UAE — barely mentioned Russia's actions in Ukraine, beyond calling for a "sustainable peace settlement" and criticising Ukraine's strikes on Russian infrastructure. For developing nations, the bloc still represents the most credible alternative to the US-led West and is a useful forum for expressing dissatisfaction with the current world order. About 30 countries have applied to join or expressed interest in joining, including Malaysia, Bangladesh and Turkey, a Nato member. Talk of the town. While its statement covered everything from AI and food production to boosting the representation of the Global South in multilateral institutions, Trump's trade policies took up much of the summit's attention. The bloc lamented "unilateral tariff and non-tariff measures", but did not directly call out the Trump administration — another pulled punch. That's unlikely to stop Trump ... In fact, he immediately hit back with a threat to impose extra duties of 10% on countries that align themselves with "anti-American policies".

Chinese Education Leaders Visit Wintec
Chinese Education Leaders Visit Wintec

Scoop

time3 days ago

  • Scoop

Chinese Education Leaders Visit Wintec

Wintec continues to grow its relationships in China through its nearly decade-long partnership with the China Education Association of International Exchange (CEAIE), this was recently highlighted by the hosting of representatives from multiple Chinese tertiary institutions and the CEAIE. The visiting group met with Wintec leadership and kaimahi (staff) at Wintec's City campus to discuss New Zealand's vocational education sector and identify opportunities for further collaboration. Warwick Pitts, Wintec Operations Lead, gave the delegation a warm welcome, introducing himself with pepeha, a Māori introduction. 'It [pepeha] is an important part of the way that strangers become friends, and how long partnerships and relationships start and are maintained,' said Warwick. 'Wintec deeply values its long-standing relationship with CEAIE, a relationship that, by extension, connects us with a vast network of Chinese institutions.' Warwick highlighted the importance of vocational learning and acknowledged Wintec's involvement in various collaborative programmes with China. 'Vocational education plays a pivotal role in keeping up with the needs of today's evolving and increasingly complex world. 'Wintec was proud to have led the Sino–New Zealand Model Programme, through which we trained many Chinese leaders and teachers… We look forward to continuing to work with CEAIE to identify further collaboration opportunities.' The head of the visiting delegation, Dr An Yan, CEAIE Deputy Secretary-General, also expressed appreciation for the long-standing partnership between Wintec and the CEAIE and looks forward to more collaboration in the future. "It was a great pleasure to visit the Waikato Institute of Technology with the delegation from higher vocational education institutions. This visit has been highly rewarding, and we believe it will mark the beginning of more collaboration in the future," said An. The campus visit concluded with the exchanging of gifts, a custom in Chinese culture, followed by a waiata (song) from Wintec kaimahi. Wintec has led and contributed to numerous key education partnerships with China, including the Sino–New Zealand Model Programme, interactive design collaborations with Jinhua Vocational and Technical University, and the Train the Trainer initiative. Through its delivery of effective on and offshore programmes, Wintec continues to develop and maintain international partnerships in China. About Wintec Wintec (Waikato Institute of Technology) is an institute of technology based in New Zealand's Waikato region. Wintec offers a wide range of degrees, diplomas and certificates. With a focus on practical, hands-on learning, Wintec is dedicated to equipping students with the skills and knowledge needed to succeed in their chosen careers. Wintec is currently part of Te Pūkenga – New Zealand Institute of Skills and Technology, located in region 2 of the national network.

Entry-level 3D printers drive market growth as high-end falters
Entry-level 3D printers drive market growth as high-end falters

Techday NZ

time4 days ago

  • Techday NZ

Entry-level 3D printers drive market growth as high-end falters

The global 3D printer market experienced contrasting developments in the first quarter of 2025 amid a complex macroeconomic environment, according to new analysis by CONTEXT. Overall system revenues in the 3D printer market grew by 5% year-on-year, which was entirely attributed to a 22% increase in revenues from Entry-level printers. This segment benefitted from consumer and channel partners escalating purchases ahead of anticipated US tariffs on Chinese imports. By contrast, the Industrial and Midrange segments recorded decreasing revenues as ongoing economic uncertainty, tariffs, and rising interest rates dampened capital spending. Chris Connery, Vice President of Global Analysis at CONTEXT, commented: "Amid looming tariff wars, unstable market conditions, persistent inflation and high interest rates, the Entry-level class saw a significant surge in shipments, while the Industrial and Midrange sectors continued to face headwinds." Entry-level printers The Entry-level category was the standout performer with shipments rising 15% year-on-year, reversing declines seen in 2024. Over a million Entry-level units were shipped globally in Q1 2025. This growth was almost wholly driven by efforts of vendors, distributors and end-users to purchase before US tariffs on Chinese goods took effect. Chinese vendors accounted for approximately 95% of all Entry-level printers shipped during the quarter. Within this category, Bambu Lab stood out, posting 64% year-on-year shipment growth. Creality endured a minor decrease in sales but still retained a dominant 39% share of global unit sales. Other manufacturers such as Flashforge and Elegoo also reported substantial year-on-year shipment increases. Industrial and Midrange segments Industrial and Midrange systems continued to face challenges as high interest rates constrained investments. Total global Industrial 3D printer shipments declined by 14% year-on-year in the first quarter. Polymer-based Industrial systems experienced an 18% fall, while metal-based systems registered an 8% drop. Chinese companies navigated these conditions more effectively than Western firms, and demand for advanced Metal Powder Bed Fusion (PBF) printers from vendors such as Eplus3D and Nikon SLM Solutions offered some resilience. Revenues in the Industrial segment decreased by 6% compared to the previous year, but rising average selling prices for advanced metal printers moderated the impact. The Midrange price segment experienced a 16% drop in shipments year-on-year during the quarter. Chinese vendors, primarily addressing domestic demand, outperformed Western counterparts, with Midrange shipments from UnionTech climbing 13%. Despite this, demand within China shifted towards lower price classes, as reflected in the reduced shipments of UnionTech's Industrial Polymer machines. Flashforge continued to perform strongly, especially in Asia Pacific and Middle East jewellery markets, supporting the segment's sales. Conversely, Stratasys, 3D Systems and Formlabs saw sales dwindle, contributing to a global trailing-twelve-month decrease of 13% in Midrange shipments. Professional systems Shipments of Professional printers saw a modest overall decline of 4% year-on-year. However, a significant technology shift underpinned this figure. Material extrusion systems, dominated by FDM/FFF technology, suffered a 31% drop in shipments, with a similar decrease over the trailing-twelve-month period, as buyers turned to higher-performing Entry-level products from companies like Bambu Lab. In contrast, vat photopolymerisation printers recorded a 19% increase in year-on-year shipments. Companies such as Formlabs and SprintRay fuelled this segment by introducing new products based on mSLA technology, with Formlabs reporting a 40% rise in shipments, leading the segment by market share. Sector outlook Industry outlooks for 2025 have been revised downward, particularly for high-end systems, in light of continued tariffs, inflation, and high interest rates. Many companies are prioritising profitability and reviewing their strategies, with some focusing on mergers and acquisitions and others divesting or spinning out their additive manufacturing businesses. Certain firms have shifted focus to regional defence and aerospace markets, leaning into current demand while waiting for an improvement in broader business conditions. Connery stated: "While the immediate forecast is challenging, there remains strong underlying pent-up demand, particularly for Industrial systems. OEMs still report high levels of customer interest, and the industry is poised to rebound once macroeconomic conditions improve. We expect a gradual recovery to begin in 2026 as interest rates fall and stimulate renewed capital spending, similar to the surge seen after the Covid lockdowns." Regional onshoring, disrupted supply chains, and a drive for greater production autonomy are likely to shape future additive manufacturing opportunities. The current climate has created a divergence across segments, but elevated customer engagement in the industrial segment suggests latent demand may be realised should financing conditions turn favourable in the coming years.

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store