Runes found in Canadian wilderness baffle archaeologists
Archaeologists remain baffled by a surprising, seemingly ahistorical find located deep in the Canadian wilderness. But after years of research, analysis, and historical corroboration, an interdisciplinary team has finally made their findings available to the public. Tucked away in a forest approximately 465 miles northwest of Ottawa, a massive slab of bedrock features a hand-etched rendition of the full Lord's Prayer. But the religious text isn't inscribed in French or English—it's composed of over 250 symbols from the oldest known runic alphabet.
The perplexing discovery happened completely by chance, according to the CBC. Hidden for centuries, the stone became exposed only after a tree fell near the town of Wawa, not far from Lake Superior. Closer inspection showed that someone had etched 255 runes into a roughly 4 by 5 foot section of the slab. Additionally, they took time to add a detailed illustration of a boat, an additional 16 runic signs, and 14 X markings.
Photos of the site soon wound up in front of Ryan Primrose, president of the Ontario Center for Archaeological Education, who was immediately stunned by the images.
'It's certainly among the least expected discoveries of my career. It's absolutely fascinating,' he told CBC.
However, Primrose didn't want anyone jumping to conclusions about the inscription. While it's true that Vikings explored portions of present-day Canada thousands of years ago, he doubted they were responsible for the mystery message.
'We didn't want to release anything publicly until we had done as much analysis as possible,' said Primrose.
He soon contacted Uppsala University emeritus professor of runology Henrik Williams, and helped the renowned expert arrange a visit to the site the following October.
'I was under a tarpaulin for three hours with a flashlight, looking at the runes and the others were sitting outside freezing,' recalled Williams.
The group's patience and endurance paid off. Williams eventually determined that the message was written with Futhark alphabetic runes. First developed and used by Germanic peoples between the 2nd and 8th centuries CE, Futhark eventually evolved into a simplified version adopted by Scandinavians. Both the Anglo-Saxons and Frisiacs also expanded it into their own variants, but the knowledge of how to read its original iteration died out by the High Middle Ages (around 1000-1300 CE). It wouldn't be until 1865 that Norwegian scholar Sophus Bugge finally succeeded in deciphering the long-lost language.
People across Europe remained fascinated with runes in the interim, however. During the early 1600s, Swedish polymath (and occultist) Johannes Bureus adopted the symbols into a system that roughly corresponded to his home country's language. This culminated in the publication of a Swedish language Lord's Prayer written with the Futhark runes in 1611. But don't think the Canadian oddity's story ended there.
'This must have been a Swede,' Primrose said of the etcher. 'Were there any Swedes at all here?'
Not during the 17th century, according to his research. That said, historical documents confirm that Hudson's Bay Company stationed Swedish workers at trading posts across Canada beginning in the 1800s. And it just so happens that Bureus' runic Lord's Prayer was republished during the 19th century.
Taken altogether, Primrose and colleagues now theorize that a Hudson's Bay Company employee—or employees—are responsible for the labor-intensive project that likely took days, if not weeks to complete.
The conservationists are now working with the local landowners on a leasehold to turn their archaeological discovery into a public heritage site that includes a protective structure to guard it against the elements.
Primrose confessed to being 'a little disappointed' that the artifact is likely only a couple centuries old, but plenty of questions still surround the find. Was the site a place for religious gatherings, or the devotional effort of one person? Prior to its exposure, the bedrock also lay under multiple inches of soil. With no other artifacts found nearby, was the prayer intentionally buried?
'The mystery doesn't fade just because it's younger than we hoped. Why was it carved here? Why this text? There are no answers,' he said. 'And mysteries always draw people in.'
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Boston Globe
a day ago
- Boston Globe
Runestone that may be North America's oldest turns up in a Canadian forest
The runestone was found on private property in 2015, after the trees' collapse exposed it again to the elements of Ontario. The carvings quickly raised the specter of Vikings — there is only one confirmed Viking settlement in North America, in Newfoundland — but investigation soon knocked that idea down. Nor was the stone a forgery, researchers said, like the Kensington Runestone of Minnesota, which scholars found to be a 19th-century hoax. The Ontario runestone is 'a remarkable find,' said Kristel Zilmer, a runologist at the University of Oslo who was not involved in the project. The stone, she said, 'shows how such knowledge sometimes traveled with people, occasionally leaving behind finds like this one in rather unexpected places.' Advertisement Ryan Primrose, the archaeologist called to the site, near the town of Wawa, was among the surprised. 'I had never expected to encounter a runestone during my career,' he said. He soon reached Henrik Williams, a runologist and professor at Uppsala University in Sweden, who spent hours under a tarp studying the runes in a cold October rain. 'It was a drizzly day — even for a Swede,' Williams said. Advertisement The runes puzzled him at first, so he searched online for some of the words that he couldn't make sense of. He finally landed on a book he had seen before but never much considered: a runic guide published in 1611 by Johannes Bureus, who thought Swedes should use runes. ('I agree with him,' Williams said, 'but that ship has sailed.') He then pieced together the script, finding that it lined up with a Swedish and Protestant version of the Lord's Prayer. As for the boat? 'We're still working on it,' Primrose said. The carving was likely to have taken several weeks, and a Swede was probably responsible, Williams said. 'I don't think anybody else would have taken it upon themselves and reproduced it with such exactness,' he said. But although this gave the researchers a time frame — after 1611 — they have found no artifacts to provide a clearer date or purpose for the carving. The trees that fell were about 80 years old, Williams said, so the carving was most likely made at least a century ago. 'How much further back you go, I have no idea,' he said. The discovery puts the runestone among a handful found in Canada and the United States; the oldest to be dated with confidence is from the 1880s. Most 'do not pretend to be old at all,' Williams said, and a few are mysteries — their runes obscure and the purposes unknown. The one in Ontario 'could very well be the oldest one yet,' he said. 'I think it probably is.' In Canada, the researchers scoured regional archives, finding that at least a handful of Swedes were among those employed by the Hudson's Bay Company on Lake Superior in the 1800s, said Johanna Rowe, the local historian. Advertisement Primrose said the stone may have been carved as a personal act of devotion, or to be a point of congregation. 'It still remains a mystery,' he said. 'Most people don't realize what's in their own backyard unless they look,' Rowe said. 'Every community should do a little digging.' Shannon Lewis-Simpson, an archaeologist at Memorial University in Newfoundland who was not involved in the research, said the team was 'probably right' that a 19th-century Swede had made the carving. 'There's a lot of long winter nights up there,' she said. 'Why not carve up a runestone with the Lord's Prayer? But why cover it up with dirt afterward? Humans are strange, and that's why archaeology is fascinating.' The researchers did not immediately share news of the discovery, in part because they had to work out terms with the property's owner. Primrose hopes the site will eventually be open to visitors, but the team has not disclosed the owner's identity or the stone's exact location. Even Wawa's mayor, Melanie Pilon, found out about the stone only a few years ago. 'It was definitely on a need-to-know basis,' she said. When she visited, she said, she felt 'an aura about the site,' calling it 'magnificent.' Primrose said that the researchers now hoped the public could offer more information. 'We invite anyone to please reach out if they have it, especially historical records,' he said. Lewis-Simpson commended the researchers for their caution, noting that many people might jump to conclusions about a newly found runestone. 'If anyone turns up anything that's slightly runic everyone thinks it must be 'lost Vikings,'' she said. Advertisement This article originally appeared in
Time Business News
2 days ago
- Time Business News
Permit and code considerations when building a 3-season room in Canada
Adding a 3-season room is a popular way for Canadian homeowners to extend their living space and enjoy more of the year outdoors. However, before starting construction, it's essential to understand the permitting and building code requirements that apply in your province or municipality. From zoning bylaws to electrical regulations, planning ahead ensures your project is safe, compliant, and stress-free. Here's what you need to know to navigate the process smoothly in Canada. Do you need a permit for a 3-season room? Most 3-season room projects in Canada require permits, particularly when structural changes are involved. Whether you're enclosing an existing deck or building a new addition, it's important to check with your local building department before you begin. General rules in Canadian municipalities Across Canada, building permits are generally required for any addition that changes the footprint or exterior of your home. A 3-season room, even if not heated for year-round use, typically qualifies as a structural enclosure and must comply with local building codes and zoning bylaws. Permits help ensure safety and adherence to provincial standards under the National Building Code of Canada or its provincially adapted versions. When to involve a licensed contractor or engineer If your 3-season room involves foundation work, electrical upgrades, or significant structural modifications, a licensed contractor or engineer should be involved. Their knowledge ensures the space is safe, up to code, and approved by your local municipality. In regions with heavy snow loads or high winds, professional design and engineering are often required for compliance. Zoning and building code compliance Zoning regulations and provincial building codes govern where and how you can build on your property, and they vary depending on your location within Canada. Setback, size, and height restrictions Each municipality sets its own zoning rules regarding setbacks (distance from property lines), structure height, and total lot coverage. Before drawing up your plans, confirm that your proposed 3-season room complies with local zoning bylaws. In some areas, variances may be required for certain designs or property sizes. Structural load and wind resistance requirements Canadian building codes include strict guidelines for structural performance, especially in areas with high snow accumulation. Your 3-season room must meet specified snow load and wind resistance standards, which may affect your roof style, framing materials, and anchoring systems. Meeting these standards is not just a legal requirement it ensures your structure is safe throughout the year. Electrical and HVAC considerations Many Canadian homeowners add lighting, outlets, or heaters to their 3-season rooms for added comfort. These upgrades come with their own code requirements. Code for electrical outlets and lighting Any electrical work must comply with the Canadian Electrical Code (CEC) and be performed by a licensed electrician. GFCI (Ground Fault Circuit Interrupter) outlets are required in areas where moisture may be present, such as patios or enclosed porches. Permits for electrical work are often separate from general building permits and require inspection by your local authority. Adding fans, heaters, or hvac units While 3-season rooms aren't usually connected to a home's main HVAC system, supplemental electric heaters or ceiling fans are common. Any permanent heating elements must meet provincial energy efficiency and safety standards. Be sure to clarify with your municipal office whether a mechanical permit is needed for your chosen installation. Working with your local dealer and municipality The permitting process may seem complex, but you're not on your own. Partnering with an experienced dealer can make approvals easier and faster. How Sunspace dealers help navigate approvals Certified Sunspace dealers across Canada are familiar with provincial and municipal permitting processes. They can assist with providing structural drawings, product specifications, and application documentation helping streamline communication with local building departments. Timeline for permits and inspections Permit timelines vary across provinces and municipalities. On average, approvals for simple residential additions like a 3-season room take 2 to 6 weeks. Inspections may be required at different stages such as after framing, electrical rough-in, and final completion. Your dealer or contractor can help you coordinate these steps. Tips for a smooth permitting process A little preparation goes a long way in avoiding delays or unexpected costs during your project. Gathering documentation and site plans Ensure you have accurate site measurements, a current property survey, and detailed plans or renderings of your 3-season room. Municipal offices may also request structural load calculations and product data sheets for windows and doors. Submitting a complete application at the outset greatly reduces processing time. Common mistakes to avoid Starting construction without a permit is one of the most common (and costly) mistakes. Doing so can result in stop-work orders, fines, or the need to undo completed work. Other pitfalls include ignoring zoning rules or underestimating snow load requirements. Always confirm written guidelines with your local building office before starting, and keep all approvals and correspondence on file. Sunrooms built for Canadian comfort At 3 Season Solutions, we design and build high-quality sunrooms tailored to how you live and the climate you live in. Whether you're looking for a classic 3-season vinyl sunroom, a bright glass enclosure, or a more advanced insulated model, our team helps you find the perfect solution for extending your living space. We specialize in insulated sunrooms for homeowners who want added comfort during early spring and late fall. Built with thermally broken aluminum framing, insulated wall panels, and energy-efficient windows, these rooms deliver excellent temperature control without needing full HVAC systems. They bridge the gap between traditional 3-season rooms and full 4-season additions, offering a cozy, protected space that blends beautifully with your home. From your initial consultation to the final build, 3 Season Solutions ensures your sunroom is professionally designed, code-compliant, and built to last. Conclusion For Canadian homeowners, adding a 3-season room is an exciting opportunity to enjoy more time outdoors, sheltered from the elements and surrounded by natural light. But before building begins, understanding your local permit requirements and building codes is essential. With the right information, proper planning, and expert support from your dealer, your new space will be built to code, approved on time, and ready to enjoy for years to come. TIME BUSINESS NEWS
Forbes
2 days ago
- Forbes
Bourbon Vs. Whiskey: What's The Difference?
Glass of whisky cognac or bourbon in ornamental glass next to a vinatge wooden barrel on a rustic ... More wood and dark background. Let's face it: the world of whiskey can feel a little intimidating at first. Between the terminology, regional styles, and endless bottles lining the shelves, it's easy to get overwhelmed. But once you understand a few basics, whiskey quickly becomes less of a mystery—and a lot more fun to explore. A good place to start? Bourbon. It's America's best-known whiskey, rich in flavor and steeped in tradition. But it's just one member of a much larger whiskey family that includes Scotch, Irish whiskey, Canadian whisky, and more. Each has its own personality, shaped by where it's made, how it's aged, and what grains go into the mash bill. So what exactly sets bourbon apart from other whiskies? Let's pour into the details. Bourbon vs. Whiskey: A Quick Primer Pouring whiskey from bottle into glass on wooden barrel against black background, closeup Think of whiskey as the umbrella term. It covers a wide range of spirits made from fermented grain mash and aged in barrels. Bourbon, on the other hand, is a specific type of whiskey with strict requirements. To be called bourbon, the whiskey must: That high corn content and new oak aging give bourbon its signature sweet, full-bodied flavor, often bursting with caramel, vanilla, and a touch of spice. Other types of whiskey are made differently. Scotch, for example, usually comes from malted barley and is aged in used barrels, often with a smoky, peaty character. Irish whiskey is typically triple-distilled for a smoother, lighter taste. And Canadian whisky, often referred to as "rye" regardless of its actual grain content, tends to be mild, clean, and easygoing. Flavor Profiles: What to Expect in the Glass Two hands clink glasses of whiskey wiskey on the couch, cozy. Bar drinking menu. Bourbons to Try Glass of whiskey or cognac with ice cubes and smoking cigar and on bar counter Buffalo Trace Balanced and approachable, this bourbon features smooth notes of caramel, vanilla, and a touch of brown sugar. Great for sipping straight or mixing into an Old Fashioned. Maker's Mark A classic wheated bourbon with soft, rounded flavors of honey, vanilla, and a gentle fruity finish. Creamy and mellow—perfect for those new to bourbon. Woodford Reserve Rich and complex with layers of dried fruit, toasty oak, dark chocolate, and a spicy edge. A great choice for drinkers looking for a deeper experience. Other Whiskeys to Explore Speyside scotch whisky tasting on old dark wooden vintage table with barley grains close up Scotch: Glenfiddich 12-Year-Old An approachable single malt with fresh, light notes of pear, malt, and honey. Smooth and only lightly fruity, it's a great entry into the Scotch world. Irish Whiskey: Jameson Ireland's most famous export for a reason. Expect a smooth, light-bodied whiskey with hints of green apple, vanilla, and a touch of spice. Works well in Irish coffee or neat. Canadian Whisky: Crown Royal A go-to Canadian classic with a clean, gentle profile. You'll find soft notes of vanilla, light oak, and a hint of caramel. Excellent for cocktails—or sipping by the fire. Whether you're drawn to bourbon's bold sweetness or curious about the smoky charm of Scotch, there's no wrong direction—only different roads to delicious. Bourbon tends to be the crowd-pleaser, with warm, comforting flavors that are easy to love. But branching out into Irish, Canadian, or Scotch whiskies opens up a whole world of nuance and regional character. The best way to learn what you like? Taste widely, ask questions, and keep a few good bottles on hand for research purposes. You know—for science.
