
I just tested this stunning $2,400 stereo amp — and my music will never sound the same again
Yet, as with all audiophiles, it always feels like something is missing. I can never sit still with my audio system, and I always want the next biggest thing. I've already sunk thousands into my system, so I'm always curious how much better things can get.
The amplifier is the core of my system. So I swapped my Onkyo unit out for this $2,399 option from Cambridge Audio, the EXA100. And my goodness — I don't think anything is going to come close for quite some time.
Is it expensive? Yes. Is it also really, really good? Also yes. The EXA100 brings a wonderfully big, deep sound, which retains detail. It'll drive even the largest of speakers, and brings great soundstage to the table for some excellent room-filling audio. You'll need to add in some stereo speakers, but the built-in Bluetooth connection means you can enjoy music without needing to plug in any extra devices.
Before I talk about any kind of sound stuff, I need to remind you that looks are important when it comes to choosing an amplifier — at least to me. And the EXA100 looks as expensive as you'd hope for something that costs more than a Mac Studio.
The EXA100 is wrapped in metal and features a simple and attractive design across the front. The volume dial is a focal point, taking up a chunk of the right side of the amp. There's a large black glass panel bisecting the front fascia that holds all the source buttons, and then there's a simple power button on the left side.
It weighs a ton — or 28.2 pounds to be exact. That's a weighty thing, and it goes to show just how much incredible stuff there is in the amp. You can even just see the internals through the vents at the top. Compared to my old amp, it looks and feels like something worth six times the price.
As touch controls and rubber-coated buttons become the norm when it comes to consumer audio gear, the fact that the EXA100 is covered with proper clicky buttons is wonderful.
The buttons on the front are pleasingly clicky, and the power button feels lovely under the finger. But it's the clicks and clunks inside the unit that make everything feel even better. When you press a source button, there's a click as the circuit's mechanisms move into place inside the amp. It adds an air of the analog to proceedings and makes everything feel even better.
Then there's the nob feel. That volume knob is not only large and in charge, but it feels excellent under the finger. Turning it to change the volume feels expensive, as you spin the metal dial around. It even moves itself when you press the volume keys on the remote... very nice.
The most important part is how the Cambridge Audio EXA100 makes my stereo system sound.
It's interesting that I wasn't entirely sure whether the jump in audio quality was going to be all that big. After all, as expensive as my KEF LS50 Metas might have been, my old amp was perfectly able to power them across a wide range of different genres and playback volumes.
Oh, how wrong I was. I've tried out expensive amps in special playback rooms before, but there's something about it being in your own listening room that makes things very, very different. The EXA100 made my components sing, and it showed me what my speakers are truly capable of.
There's a glorious warmth to playback, which complements my detail-oriented LS50 Meta speakers to a tee. Plugging in my subwoofer brought even more low-end grunt to the proceedings and rumbled the floor of the room more than my old amp could ever hope to.
The EXA100 is an amp that values the warmer tone more than other options, I'm told, so there's some detail roll-off towards the top end. My speakers didn't mind too much, given they're often described as 'overly analytical' anyway. My biggest takeaway from the experience was that combining my speakers with something more expensive didn't just change the sound, it also made it... more.
I could hear more bass notes, feel more cymbal crashes. The soundstage was much wider, and the experience more musical as a whole.
Classical recordings like my favorite Bach pieces felt enormous. Closing my eyes, it felt like I was in front of the orchestra as they played me my own personal concert. Even my metal albums sounded better, with more edge to the distorted guitars, and extra impact to the bass notes and the drums.
I already loved the sound of my HiFi, but now I love it.
My old amplifier has five inputs. A phono input for record players, and then a couple more RCA plugs for other devices. The EXA100 has... a few more ways to plug things in.
There's digital inputs for the built in DAC, like optical ports, Bluetooth, and HDMI eARC to plug in a TV. There's five different RCA for other devices, two XLR balanced plugs. The Subwoofer out, a trigger in and out for power state matching... there's loads.
There is one thing missing — a phono pre-amp. Cambridge Audio says that's because seperate pre-amps sound better than anything it could have put inside the device, but it does still feel like a weird ommision. Thankfully, I've got a seperate unit, but it's something to remember.
While it may seem like a very expensive amp, to some audiophiles, this is a 'mid-range' product. $2,400 is a lot of money — but it's also not the tens of thousands of dollars that you can spend on audio gear.
I'd argue that this is the perfect sweet spot, however. Sure, those much more expensive options are going to sound mind-blowing, but then you need more expensive speakers and other components to match.
The EXA100 is my new 'I want this' element to my HiFi system. I want to be able to plug in my best headphones and listen to my music, and enjoy more of the incredible sound it's capable of recreating.
But then Cambridge Audio does make an even more expensive model...

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Tom's Guide
20 minutes ago
- Tom's Guide
Want the best sound out of your desk speakers? Here's how to place them correctly
Desktop speakers make for a great way to listen to your music while you work, or for listening to mixes while you make your own music. The best desk speakers are many — but none of them will sound any good unless you get them placed correctly on your desk. There might be missed detail, a soundstage that's too restricted, or even bass that can get too boomy. Making sure that your speakers are in the best orientation is a delicate art, but it's one that need only be done once. Or until you buy some new speakers. The Kanto ORA4 are some of the best desktop speakers I've ever used. They don't cost as much as some of the more premium options, but they sound amazing. A Bluetooth connection makes them more convenient, and the USB-C port on the back makes getting music playing super easy with a connected device. The optional stands a are a great way to help you place them on your desk properly as well. There are a couple of speaker placement basics that we need to nail down before we get to the more complicated stuff. First and foremost is making sure you get them away from the wall. You'll want a good four inches if you can stretch it at least, especially if they've got bass ports on the back. Why? Bass has an annoying habit of bouncing around a lot more when too close to a wall, and it makes them sound overly-bassy and boomy. And not in the fun way either — it sounds horrible. So make sure there's some space for your speakers to breathe. Then you'll want to make sure your speakers aren't being hidden by your monitor. Make sure they're either side, so that they can play their sweet sounds without being blocked by your screen. Sounds obvious, but it's still worth mentioning. With those quick placement basics out of the way, let's get into our first placement tip — toe in. "Toeing in" your speakers means that they face inwards slightly. The idea is the drivers face towards you, so that any sound they make is being fed directly to your ears. To help demonstrate the point, I've made some diagrams to show you what it all means and looks like. Get instant access to breaking news, the hottest reviews, great deals and helpful tips. The image above shows you what toed-in speakers should look like. The idea is that they point towards yourself, either side of your monitor. If you were to draw a line, they'd both roughly meet the same point as your ears. This will increase detail, and make sure that you can hear all of the nuance and the detail in your music. This is my preferred way to place my speakers, although some people find that it can narrow the soundstage. To counteract, go the opposite way — just make sure that they're still facing towards you, and don't go in the other direction. That would be toe out, and then you wouldn't hear much of anything at all. Working out how much toe in you like is a fine art — some prefer the diagram above, while others the first diagram, and some are in-between the two. The trick is to try out a bunch of angles, and work out which you think sounds better. Just make sure that you keep the angles of the speakers the same, otherwise stereo mixes might sound strange. You should also avoid too much toe in. This will restrict the soundstage too much, and the music will sound odd if it travels between the left and right channels given they're now much closer together. Again, imagine that there are two lines coming from the speakers. These should cross over somewhere behind you, not in front or 'in' you. Where do you hear your music from? Your ears. Despite how there is some cone of influence built into the design of a speaker driver, you still want them to be roughly the same kind of height as your ears to make sure that you can hear every single detail in your music. Below you'll find an example of what not to do — which is to say, point your speakers at your stomach. This won't help anyone but your slowly-digesting lunch. And that probably couldn't care less about the finer detail of your favorite pop playlist. Instead, you should think about pointing them towards your ears. There are a couple of ways to do this, and not all of them require spending any money. The first is to angle the speakers at desk level using either a special stand, or by leaning them on a couple of books. As you can see in the diagram above, you want to angle the speakers so they're pointing at your ears. You'll want to use the main driver unit as a reference point, usually found in the lower half of the front of the speaker. This is the part that makes the most sound coming from the speaker. This is probably the cheapest way to make sure your speakers are pointing towards you, given that you've almost certainly got something to lean them on to bring them to the right angle. The second way to make sure that the speakers are in the right spot is to buy some stands that bring them up to ear level. This could be a taller angled stand that gets them closer to your ears, a tall stand that doesn't require angling, or wall mounting that gets them to where they need to be. This is going to be the best sounding of all the options, as it brings them closer to your ears without having to worry about any angling. It's often more expensive, however, and if you wall mount them it's even trickier. It's worth it in the long run, though. Finally, there's angling them down if they're above your monitor. That could mean they're wall mounted above your desk, or that they're on a shelf above you. Just remember the golden rule — that your speakers should be facing your ears as much as possible, or at least at the same level — and you'll be fine. Wall mounting options generally let you manipulate their position, but if they're on a shelf, you might want to put a book on the back edge and then support them from the front with a shelf ledge. This placement is good for people with dual monitor setups who have less desk space for speakers. Take all of those tips and join them together, and you should have speakers facing your ears. They'll either be at ear height or angled properly, and there's some toe in to make sure the sound is coming your way. There's a certain amount of playing around of course, speaker placement is not an exact science. But hopefully, with a little help from yours truly your speakers are sounding their best on your desk.


Business Upturn
13 hours ago
- Business Upturn
AboveOrigins Launches Bluetooth-Connected Portable Dual 4K Touchscreen Monitor for Productivity
Toronto, Canada, July 01, 2025 (GLOBE NEWSWIRE) — AboveOrigins, a Toronto-based technology company, has officially launched its latest innovation: the world's first Bluetooth-enabled, 18.5-inch dual-screen portable monitor featuring 4K resolution, a 144Hz refresh rate, built-in microphone, and comprehensive USB-C and Thunderbolt support. AboveOrigins dual 4K monitor turns any desk into a mobile workstation. Purpose-built for today's hybrid professionals, gamers, students, and remote workers, the new portable monitor from AboveOrigins aims to transform mobile productivity and collaborative workflows. Weighing just 3.5 lbs, the device is lightweight, foldable, and compact enough to fit seamlessly into a bag or desktop setup, without compromising on performance. Designed for flexible use across a wide range of environments—from home offices and co-working spaces to creative studios and travel settings—the monitor features ultra-responsive dual touchscreen displays and full Bluetooth functionality. It supports multiple viewing modes, including split mode for multitasking, mirror mode for presentations, full mode for immersive viewing, and portrait mode for reading, coding, or vertical layouts. 'AboveOrigins set out to create a monitor that could be shared between two different devices—either via Bluetooth or through a Type-C connection,' said Kevin Botha, Technical Engineer at AboveOrigins. 'This level of connectivity opens up new flexibility for collaborative work, dual-device setups, and seamless transitions between mobile and desktop use.' The monitor's dual-screen system is optimized for high-performance workflows without cable clutter, making it an ideal solution for video editors, streamers, designers, gamers, and business users alike. With advanced portability and premium display technology, AboveOrigins is addressing the growing demand for tools that support flexibility, speed, and clarity on the move. For more information and pre-order details, visit , where the AboveOrigins monitor is currently available at up to 45% off during the pre-order launch phase. About AboveOrigins AboveOrigins is a Toronto-based technology company specializing in innovative display hardware designed for modern mobile workforces. With a focus on functionality, style, and mobility, the brand develops tools that enhance productivity and performance in a fast-changing digital world. Disclaimer: The above press release comes to you under an arrangement with GlobeNewswire. Business Upturn takes no editorial responsibility for the same. Ahmedabad Plane Crash
Yahoo
13 hours ago
- Yahoo
AboveOrigins Launches Bluetooth-Connected Portable Dual 4K Touchscreen Monitor for Productivity
Toronto, Canada, July 01, 2025 (GLOBE NEWSWIRE) -- AboveOrigins, a Toronto-based technology company, has officially launched its latest innovation: the world's first Bluetooth-enabled, 18.5-inch dual-screen portable monitor featuring 4K resolution, a 144Hz refresh rate, built-in microphone, and comprehensive USB-C and Thunderbolt support. AboveOrigins dual 4K monitor turns any desk into a mobile workstation. Purpose-built for today's hybrid professionals, gamers, students, and remote workers, the new portable monitor from AboveOrigins aims to transform mobile productivity and collaborative workflows. Weighing just 3.5 lbs, the device is lightweight, foldable, and compact enough to fit seamlessly into a bag or desktop setup, without compromising on performance. Designed for flexible use across a wide range of environments—from home offices and co-working spaces to creative studios and travel settings—the monitor features ultra-responsive dual touchscreen displays and full Bluetooth functionality. It supports multiple viewing modes, including split mode for multitasking, mirror mode for presentations, full mode for immersive viewing, and portrait mode for reading, coding, or vertical layouts. 'AboveOrigins set out to create a monitor that could be shared between two different devices—either via Bluetooth or through a Type-C connection,' said Kevin Botha, Technical Engineer at AboveOrigins. 'This level of connectivity opens up new flexibility for collaborative work, dual-device setups, and seamless transitions between mobile and desktop use.' The monitor's dual-screen system is optimized for high-performance workflows without cable clutter, making it an ideal solution for video editors, streamers, designers, gamers, and business users alike. With advanced portability and premium display technology, AboveOrigins is addressing the growing demand for tools that support flexibility, speed, and clarity on the move. For more information and pre-order details, visit where the AboveOrigins monitor is currently available at up to 45% off during the pre-order launch phase. About AboveOrigins AboveOrigins is a Toronto-based technology company specializing in innovative display hardware designed for modern mobile workforces. With a focus on functionality, style, and mobility, the brand develops tools that enhance productivity and performance in a fast-changing digital world. CONTACT: Company: AboveOrigins Contact Person: Press Team Email: info@ Website: in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data