Indian auto sector faces tough Q1 FY26 as costs climb and exports slow: Report
Notify me
India's auto sector is likely to be hit with margin pressure once again during the first quarter of FY26, a recent report by HDFC Securities has stated. The report does not give an optimistic outlook for original equipment manufacturers (OEMs) since a mix of elevated input prices, softer demand, and regulatory changes could dent profitability in the short term.
Among the main issues highlighted in the report is the continued increase in prices of major raw materials like steel and platinum group metals—both essential for auto production. These higher input prices are likely to be a significant burden on gross margins, especially in a quarter that usually is characterized by muted seasonal demand.
Also Read : Indian auto exports rise sharply as home market remains sluggish in June: Report
With volumes anticipated to fall from post-festive season peaks, the effect of operating deleverage—reduced revenue spread over fixed costs—could further reduce EBITDA margins for a number of players in the two-wheeler, passenger vehicle, and commercial vehicle segments. Two-wheelers hit by adverse mix, EV slowdown
The prospects for two-wheeler OEMs look especially taut. Weak domestic product mix, lower export contribution, and evaporating EV penetration have systematically eroding earnings potential collectively. In addition to these impacts, a limited price increase, increasing legislative regulations - specifically OBD 2 norms for two wheelers (April 1, 2025) and AC cabins for CVs is a must (June 8, 2025) - will also impact demand elasticity. Ancillary sector faces global headwinds
OEMs are not alone in this situation; the auto ancillary industry is also grappling with weaker global demand and uncertainty regarding global tariffs. Tyre makers could have some insulation from this type of demand decline as raw material prices are on the decline; aluminium price reductions would be a positive for the component makers. However, increasing ocean freight and possible supply chain issues create obstacles, and especially for those companies focused on exports.
Also Read : Indian auto industry in panic mode over rare earth magnet crisis. Why it matters so much?? Rare Earth magnet shortage adds to long-term risks
A potential shortage of rare earth magnets—essential for EV and ICE parts—is creating a further source of anxiety. With China still in charge of world processing thanks to cost and environmental issues, India's alternatives are limited. Local manufacturing or importation from other markets such as Japan are long-term alternatives, but in the near term, OEMs might have no alternative but to acquire fully assembled parts from China. This action would increase expenses, hamper localisation efforts, and impact adherence to the government's Production-Linked Incentive (PLI) scheme.
Although India's automobile industry has been very resilient in the past few quarters, the beginning of FY26 could put that to the test. With a mix of increasing costs, regulatory shifts, and global uncertainties at play, the producers might have to rethink their plans to safeguard margins and maintain growth.
Get insights into Upcoming Cars In India, Electric Vehicles, Upcoming Bikes in India and cutting-edge technology transforming the automotive landscape.
First Published Date: 13 Jul 2025, 08:00 am IST
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Hans India
37 minutes ago
- Hans India
Electronics, pharma industries get 70 pc of total PLI scheme funds in FY25: Govt data
New Delhi: The electronics and pharmaceutical sectors emerged as the biggest gainers under the government's production-linked incentive (PLI) scheme in the financial year 2024-25, cornering nearly 70 per cent of the total incentive disbursed, according to official data. Out of Rs 10,114 crore released under the scheme during the year, the electronics sector received Rs 5,732 crore, while the pharma sector got Rs 2,328 crore, the data showed. Launched in 2021 to boost domestic manufacturing, the PLI scheme was initially rolled out for 14 key sectors. Since then, it has played a crucial role in strengthening India's industrial base and pushing for higher value-added exports. The success of the scheme is clearly reflected in the performance of the electronics sector. Due to the strong manufacturing push, electronics have now made it to the list of India's top three export categories. The sector recorded a remarkable export growth of 32.46 per cent in 2024-25, with shipments rising from $29.12 billion in 2023-24 to $38.58 billion in the previous financial year. This is a big jump from $15.7 billion in 2021-22 and $23.6 billion in 2022-23, according to the government data. A major highlight within the electronics segment was computer hardware and peripherals, which saw an impressive 101 per cent growth, with exports doubling from $0.7 billion to $1.4 billion in FY25. The United Arab Emirates, the United States, the Netherlands, the United Kingdom, and Italy were among the top destinations for Indian electronic goods. The pharmaceutical sector also continued to show strength. India's drugs and pharmaceutical products are now reaching over 200 countries. In 2024-25, pharma exports rose by nearly 10 per cent to touch $30.5 billion -- underlining the country's global presence in the healthcare and medicines space. The fresh data points to the growing impact of the PLI scheme in driving India's manufacturing and export ambitions, especially in sectors where the country is beginning to emerge as a global leader.
Time of India
41 minutes ago
- Time of India
FGD norms eased to balance costs, climate and compliance
MUMBAI: The Ministry of Environment, Forest and Climate Change ( MoEF&CC ) has revised India's 2015 emission norms, dropping the blanket requirement for coal-fired power plants to install Flue Gas Desulphurisation (FGD) systems in a move that will save Indian households and industries some 25 to 30 paise per unit of electricity. FGDs will now be mandatory only for coal-fired power plants within 10 km of cities with population of over 1 million, plants in critically polluted or non-attainment areas and those using high-sulphur imported coal. All other plants, especially those using low-sulphur Indian coal, are exempt. FGD is a system that removes sulphur dioxide (SO₂) from the smoke released by coal-fired power plants. While effective in high-sulphur conditions, it is expensive, water-intensive and adds carbon dioxide (CO₂) emissions during installation and operation. FGDs are useful in places with high sulphur coal (like in China or the US), high ambient SO₂ levels and dense urban proximity. The decision follows a series of studies by IIT Delhi, CSIR-NEERI and the National Institute of Advanced Studies (NIAS), which found that ambient sulphur dioxide (SO₂) levels in most parts of India are well within the National Ambient Air Quality Standards (NAAQS). Measurements across multiple cities showed SO₂ levels ranging between 3 and 20 µg/m³, significantly below the NAAQS threshold of 80 µg/m³. The studies also questioned the environmental and economic efficacy of a universal FGD mandate in the Indian context. Indian coal typically has a sulphur content of less than 0.5%, and due to high stack heights and favourable meteorological conditions, dispersion of SO₂ is efficient. The NIAS study warned that retrofitting FGDs nationwide would add an estimated 69 million tonnes of CO₂ emissions between 2025 and 2030 due to increased limestone mining, transportation, and power consumption. Globally, carbon markets aim to incentivise generators that are reducing their carbon footprint and penalize those who are emitting carbon. With the installation of FGD, India may be increasing its carbon footprint with a reduction in SO2 emission, which is not advisable as per the present ambient air quality levels, according to a report written by CSIR-NEERI with financial support from NITI Aayog. Besides, SO₂ and CO₂ have different atmospheric lifetimes - SO₂ has a short atmospheric lifetime of several hours to about 15 days, while CO₂ persists for over 100 years. The current cost of FGD systems is approximately Rs1.40 crore per MW. As per recent Central Electricity Authority (CEA) estimate, around Rs1,47,000 crores capital investment will be required for the installation of the remaining 105 GW coal-based power plants. 'Now, it becomes imperative that the country make timely decisions so that consumers can be prevented from additional financial burdens. An appropriate decision may be taken by the concerned authority regarding the installation of FGDs in Thermal Power Plants (TPPs) considering that the ambient SO2 concentration is well below the prescribed limit,' the CSIR-NEERI report said. 'If FGD retrofits raise CO₂ emissions, are we not choosing the lesser evil here by avoiding them where they are not needed,' said a power industry source. 'Do we need to burden consumers with ₹2.5 lakh crore in unnecessary infrastructure when SO₂ levels are already well within limits,' he asked. 'This is a smarter use of resources, focusing on particulate matter and grid upgrades instead of chasing a global fad,' he said, noting that Indian consumers are better off without the one-size-fits-all FGD mandates. The Ministry's move is seen as a smart, science-led decision based on Indian coal chemistry and local air data. It avoids unnecessary CO₂ emissions from limestone use and auxiliary power. It aligns with global best practices - even the US, EU and China have moved to targeted FGD deployment, not blanket mandates. 'This is not a rollback. FGDs remain mandatory where necessary - near large urban populations or in heavily polluted areas,' the industry source said. 'This is a good example of India taking sovereign control of environmental policy, instead of blindly following Western rules,' he added.
Mint
an hour ago
- Mint
Planning to buy VinFast VF6 or VF7? Here's when you can pre-book these EVs
Vietnamese electric vehicle manufacturer VinFast is gearing up to launch its introductory products in the Indian passenger vehicle market in 2025. Ahead of the upcoming launch, the car manufacturer is currently in the process of strengthening its retail network across the country, as well as its after-sales service and EV charging network. Also, the auto company has announced that it will officially commence accepting pre-bookings for the VF6 and VF7 electric SUVs from July 15. Interestingly, on the very same day, Tesla will launch its first retail outlet in India in Mumbai. Adding more zing to the Indian electric passenger vehicle market, on the very same day, Kia will launch its Carens Clavis EV, which is a fully electric version of the Kia Carens Clavis MPV. This is going to be the first locally manufactured electric car from the South Korean OEM. (Also read: Upcoming cars in India) VinFast has already signed the dealer partner agreements with 13 different dealer groups. Initially, the VinFast dealerships will be set up in urban and emerging electric vehicle markets across the country, including cities such as Delhi, Gurugram, Noida, Chennai, Bengaluru, Hyderabad, Pune, Jaipur, Ahmedabad, Kolkata, Cochin, Bhubaneshwar, Trivandrum, Chandigarh, Lucknow, Coimbatore, Surat, Calicut, Visakhapatnam, Vijayawada, Shimla, Agra, Jhansi, Gwalior, Vapi, Baroda and Goa. Besides that, the OEM has joined hands with two different companies to offer after-sales service to the VF6 and VF7 buyers. Also, under these collaborations, VinFast VF6 and VF7 owners will be able to avail EV charging facilities as well. Here is a quick look at the VinFast VF6 and VF7 electric SUVs. The VinFast VF6 electric SUV will challenge rivals like the MG Windsor EV Pro and Hyundai Creta Electric. The VF6 is expected to be offered in two variants. The EV will churn out 201 bhp peak power and 310 Nm of maximum torque from a front-mounted motor. The EV sources power from a 59.6 kWh battery pack that promises a range of up to 440 km on a full charge. The VinFast VF7 will slot above the VF6 in the auto company's product lineup. The VF7 will come as a mid-size electric SUV. Powering this EV will be a larger 75.3 kWh battery pack, with an estimated range of over 450 km on a full charge. Upon launch, the VinFast VF7 electric SUV will lock horns with rivals such as the BYD Atto 3.
