US Army drone pilots are facing a hot and rainy headache in the Pacific
Army drones are flying shorter distances with less power due to Pacific heat and weather, a US Army general said.
A joint exercise with the Philippines is helping the Army address those challenges.
Solutions include more drones, drone swarms, and 3D printing capabilities.
The hot and rainy weather in the Western Pacific is presenting some challenges for the US Army's drone arsenal, a top officer told Business Insider.
In training, American drone operators have been working with allies to find solutions and adapt their uncrewed aerial systems to the operating environment.
US troops are currently going through the Joint Pacific Multinational Readiness Center-Exportable exercise in the Philippines, where the Army and their Philippine counterparts are training for what a war in the Indo-Pacific could look like. About 2,000 personnel are participating in the exercise.
When it comes to drone activities in this area of operations, the primary issues, Army Maj. Gen. Marcus Evans, the commander of the 25th Infantry Division out of Hawaii, told BI, are the heat and local weather patterns.
A key aspect of the training is testing how technologies like drones, counter-drone systems, reconnaissance capabilities, infantry squad vehicles, and aircraft work in conditions specific to that environment.
In the Philippines, hot temperatures upward of 90 degrees Fahrenheit impact the function of drones, namely the battery power, meaning operators can't fly them as far or long. Cold climates, like those of the Arctic tundra in Alaska, have similar effects on battery technology.
Rain and winds, too, sometimes affect the vertical takeoff and landing capabilities of some UAVs. It's monsoon season in Southeast Asia, meaning heavy rainfall and humidity are incessant.
"Generally, we've seen a reduction in the distance they can fly and the endurance for which they can fly," Evans explained.
He said his troops are having to get "accustomed to what the endurances are on the unmanned aerial systems" in this region "so then we can integrate those into tactical plans."
Immediate solutions that US soldiers have been working on include finding new locations to launch drones, flying more of them, or swarming them. Different areas may experience different weather and temperatures while launching multiple drones or swarming them leaves operators less dependent on a single drone for executing a mission. This kind of adaptive work is happening across the division, not just in one formation or a brigade for these capabilities.
At a training in Hawaii last fall, the 25th Infantry Brigade was only using small drones with ranges of about three to five kilometers depending on the environment. Now, they're working with medium-range and long-range reconnaissance capabilities that help formations see out to roughly 30 kilometers.
The learn-in-the-moment approach is in line with the Army's Transformation in Contact initiative, a program that streamlines the process for soldiers to integrate, test, and improve on new weapons and then, in turn, implement the feedback into operational planning.
One of the newer elements being implemented in the ongoing training is 3D printing for first-person view drones. It's useful, Evans said, for making most of the components and then either building a new drone or repairing others.
Evans said conflicts in Ukraine and the Middle East were also providing lessons on drone warfare and other technologies. There's much to be learned, too, from Philippine soldiers specifically with regard to fighting in the Pacific.
Earlier this year, Washington and Manila participated in their annual, three-week-long Balikatan exercise, testing anti-ship, anti-air, and coastal defense drills simulating real-world combat.
Evans said that the longer US soldiers are in this environment, "the more that we're going to understand about our ability to sustain a force and interoperate with a partner fore like the Philippine Army in this environment."
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Business Insider
2 hours ago
- Business Insider
The CEO building the 'Ikea of factories' wants to democratize semiconductor production
In his 1986 book "Engines of Creation," engineer K. Eric Drexler — often called the godfather of nanotechnology — made a prediction. "The coming era of molecular machines will mean the end of many limits: the limit of scarcity, the limit of slow development, the limit of ignorance enforced by the lack of tools," he wrote. Reading those words a few years later, when he was 16, Matthew Putman started thinking. "Our bodies work as these little micro-machines where you have ribosomes and enzymes and things that are working and replicating and making things all the time, but our factories work the way that they've worked for the last hundred years," Putman told Business Insider he thought at the time. He wondered how a world would look "where you don't have large assembly lines, you don't have smokestacks, you instead just make things so perfectly," he said. Putman became fascinated by the possibilities of machines that are "atomically precise." It wasn't until the recent AI boom, however, that the idea really took off with fabrication plants. Putman, now 50, is the CEO of Brooklyn-based Nanotronics, which he cofounded with his father in 2010. The company started out building microscopes and tools to detect defects in semiconductors, among other materials. Now, it builds small, modular semiconductor manufacturing plants called Cubefabs. While the biggest fabs in the country are often millions of square feet in size, Cubefabs measure anywhere from 25,000 square feet for the smallest units up to about 60,000 square feet for a full-sized fab. They're adaptable, and the company says they can be assembled in under a year in most places on Earth. They're also smart — thanks to the power of AI — so they can self-monitor their production and improve in real time, the company said. And they're relatively cheap, costing a minimum of $30 to $40 million, compared to large fabs that can cost billions to build. With President Donald Trump back in the White House and pledging to reinvigorate US manufacturing, a new opening has emerged for Nanotronics — even as sweeping tariffs challenge companies that produce or depend on semiconductors. Putman says that in the long term, the tariffs will bolster domestic innovation. Tariffs "should be a wake-up call — a push to create something better than what either the US or China has done before," he told BI in a video interview from the Nanotronics headquarters in Brooklyn Navy Yard. "If we get this right, American innovation won't just protect our future — it could help redefine global progress in a way that benefits humanity." Putman says compact, modular factories are exactly that. "Your factory should be incredibly small," Putman said, gesturing to the room behind him. "Eventually, it could be the size of this room." The 'Ikea of factories' Semiconductor manufacturing has surged since the launch of ChatGPT. Global annual revenue for the industry is expected to reach more than $1 trillion by 2030, according to McKinsey & Company. In the US, despite legislation subsidizing domestic semiconductor production, fabs are more expensive to construct and maintain than those built in places like mainland China and Taiwan, McKinsey says. The US also suffers from a shortage of qualified labor, which can delay construction timelines, according to the firm. To attempt to solve some of these issues, Nanotronics teamed up with architecture firm Rogers Partners and engineering firm Arup to design compact factories. Each one runs with 37 people, but Putman says the ideal setup is four factories — about 180 workers total — which allows them to scale up without halting production. "It's like the Ikea of factories," Putman said. The company has raised $182 million to date from firms including Peter Thiel's Founders Fund. Cubefabs can be used to produce chips that span a range of uses across electronics applications, electric vehicles, and photodetectors for cube satellites, Putman said. "The more precise we make things, the more abundance we bring to the world," he said. "The business of making things grow bigger and bigger starts small — molecular small." Building on the foundational research of scientist Philippe Bove — now chief scientist at Nanotronics — the company also uses gallium oxide — a type of semiconductor that can handle more power than traditional materials like silicon — to produce advanced chips. The company plans to have its first installation set up in New York within the next 18 months. "These fabs do not require billions in capital expenditure or large populations of highly trained workers," Putman told BI in a follow-up email. "The vision is that any region — whether in the Global South or the United States — should be able to produce what it needs locally."
Boston Globe
7 hours ago
- Boston Globe
The government cuts key data used in hurricane forecasting, and experts sound an alarm
NOAA spokesperson Kim Doster, in a statement, called it a 'routine process of data rotation and replacement' and said that the remaining data sources 'are fully capable of providing a complete set of cutting-edge data and models that ensure the gold-standard weather forecasting the American people deserve.' Get Starting Point A guide through the most important stories of the morning, delivered Monday through Friday. Enter Email Sign Up Traditional visible or infrared satellites provide data that becomes images showing the structure, intensity and temperature of a storm, according to NOAA information, along with features such as lightning. But those miss the three-dimensional details of a storm. The microwave data gives critical information that can't be gleaned from the conventional satellites, and helps peer under a regular image of a hurricane or a tropical cyclone to see what is going on inside of it. It is especially helpful at night. Advertisement The news is especially noteworthy during the ongoing hurricane season and as lesser storms have become more frequent, deadly and costly as climate change is worsened by the burning of fossil fuels. Advertisement Microwave imagery allows researchers and forecasters to see the center of the storm. Experts say that can help in detecting the rapid intensification of storms and in more accurately plotting the likely path of dangerous weather. 'If a hurricane, let's say, is approaching the Gulf Coast, it's a day away from making landfall, it's nighttime,' said Union of Concerned Scientists science fellow Marc Alessi. 'We will no longer be able to say, OK, this storm is definitely undergoing rapid intensification, we need to update our forecasts to reflect that.' Other microwave data will be available but only roughly half as much, hurricane specialist Michael Lowry said in a blog post. He said that greatly increases the odds that forecasters will miss rapid intensification, underestimate intensity or misplace the storm. That 'will severely impede and degrade hurricane forecasts for this season and beyond, affecting tens of millions of Americans who live along its hurricane-prone shorelines,' he said. University of Miami hurricane researcher Brian McNoldy called the loss of data 'alarmingly bad news' in a post on Bluesky. 'Microwave data are already relatively sparse, so any loss — even gradual as satellites or instruments fail — is a big deal; but to abruptly end three active functioning satellites is insanity.' NOAA and its National Weather Service office have been the target of several cuts and changes in President Donald Trump's second term. The Department of Government Efficiency gutted the agency's workforce, local field offices and funding. Already, hurricane forecasts were anticipated to be less accurate this year because weather balloons launches have been curtailed because of the lack of staffing. Advertisement 'What happened this week is another attempt by the Trump administration to sabotage our weather and climate infrastructure,' Alessi said.
Fox Sports
7 hours ago
- Fox Sports
Chelsea coach Maresca says US 'is not the right place' for Club World Cup after lightning delay
Associated Press CHARLOTTE, N.C. (AP) — Chelsea coach Enzo Maresca criticized FIFA for holding the Club World Cup in the United States after his club's match against Benfica on Saturday was delayed for two hours due to lightning and took nearly five hours to complete. Fans were told to vacate the seating bowl of Bank of America Stadium with four minutes left in regulation, although it never rained at the venue. Chelsea went on to beat Benfica 4-1 in extra time. If 'they are already suspending six, seven eight games, probably there is something that is not working well,' Maresca said, adding that the United States 'is not the right place to do this competition.' Extreme heat has been an issue throughout the tournament, with temperatures approaching 100 degrees Fahrenheit (38 Celsius) at some venues during daytime matches scheduled to accommodate European television audiences. Several matches have been delayed by rain. After the lengthy delay on Saturday, Benfica made a late push and scored the equalizer on a stoppage-time penalty. Chelsea captain Reece James said players 'had to sit and wait for a long period, and it's quite disruptive.' With the expanded Club World Cup serving as a dry run for next year's 48-team World Cup in the United States, Canada and Mexico, FIFA has been criticized over pitch conditions and match scheduling as well as its handling of the weather. ___ AP soccer: in this topic
