National Forest wildfires in North Carolina contained, US Forest Service says
All wildfires across North Carolina's National Forests have been contained or mostly contained, according to a 1:45 p.m. news release from the U.S. Forest Service on March 4.
The Falls Dam Fire, Ramshorn Fire and Hicks Cemetery fires in N.C. National Forests covered about 765 acres in total.
Here's what we know about the specifics on each fire based on statements from the Forest Service.
The news release informed the public that the three fires, as well as "all other reported fires," have been contained. Fire crews will continue reinforcing containment lines using natural barriers and improving existing defenses to prevent further spread. Smoke may still be visible in contained areas.
While a weather system moving in tonight, March 4, and lasting through tomorrow, March 5, will further elevate fire risk, the Forest Service expects precipitation and rising humidity to "moderate conditions and fire behavior in coming days."
For wildfire updates, the release suggested following the National Forests in North Carolina on Facebook at facebook.com/nfsnc, and checking for updates on the Forest Service website at fs.usda.gov/alerts/nfsnc/alerts-notices.
More: Wildfires in Western NC: See our interactive map
The Ramshorn Fire in the Croatan National Forest of Carteret County is fully contained. The fire covered about 110 acres.
The Hicks Cemetery Fire in the Pisgah National Forest of Haywood County is at about 40% containment. The fire covered about 150 acres.
The Falls Dam Fire in the Uwharrie National Forest of Montgomery County is about 65% contained. It was the largest of the three wildfires, covering about 505 acres.
While Forest Service fire crews have contained all reported fires in N.C.'s National Forests, Polk County Emergency Management posted on its Facebook page the morning of March 4 that conditions of the 3910 Fire remained stable overnight. The fire has burned 593 acres in Polk County and is 63% contained.
The Facebook post said firefighters had made "tremendous progress." An update is expected around 5 p.m. March 4.
This story will be updated.
Iris Seaton is the trending news reporter for the Asheville Citizen Times, part of the USA TODAY Network. Reach her at iseaton@citizentimes.com.
This article originally appeared on Asheville Citizen Times: North Carolina wildfires: Containment update from US Forest Service
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
4 days ago
- Yahoo
Lightning caused nearly 9,000-acre Forsyth Fire in Utah, officials say
WASHINGTON COUNTY, Utah – The Forsyth Fire continues to burn thousands of acres in Utah and was officially started by a lightning strike, officials said. Firefighters have been battling the wildfire since it was discovered on June 19. It has now burned 8,899 acres and is uncontained. The Dixie National Forest division of the U.s. Forest Service announced Tuesday that the fire was caused when lightning hit a tree. During the initial attack on the fire, the incident commander discovered a tree that was hit by lightning near the fire's point of origin in the Pine Valley Wilderness Area. An investigation into the cause showed thunderstorms came through the area June 9 – just 10 days before the fire was discovered. Evaluation of the tree proved that the lightning strike hit the base of the tree, igniting a fire within the tree's trunk. Bolts From The Blue: How Dangerous Lightning Can Strike Miles Away From Thunderstorms The U.S. Forest Service said these types of lightning strikes are so hot, they vaporize any sap and moisture in the tree, starting a very slow smoldering fire that burns from the inside out. Because the fire was contained inside the tree, it went undetected until strong winds Thursday increased fire activity, finally revealing smoke. Which States Have The Most Lightning Insurance Claims? Quickly after discovery, fire crews worked to try and stop the fire spreading. High temperatures, extremely low humidity and high winds caused the fire to make a swift run toward Pine Valley. The Washington County Sheriff reported Monday that 13 homes have been destroyed by the fire. Nearly 700 fire personnel are responding to the Forsyth article source: Lightning caused nearly 9,000-acre Forsyth Fire in Utah, officials say
Yahoo
21-06-2025
- Yahoo
Southern Utah fire destroys 12 homes; hundreds remain evacuated
PINE VALLEY, Washington County — A fast-growing wildfire burning near Pine Valley has now destroyed at least a dozen structures, while hundreds more remain threatened. Firefighters said all 12 structures in the Forsyth Fire were primary or secondary homes. The Washington County Sheriff's Office is recommending that anyone who has not yet evacuated the Pine Valley area leave as soon as possible, as crews continue to battle a wildfire that has grown due to strong winds and other 'critical' fire weather conditions. 'If you have family up in Pine Valley, please tell them to evacuate,' the agency said in a post to Facebook Friday afternoon. About 400 to 500 people were evacuated from Pine Valley, as well as the Pine Valley Campground, U.S. Forest Service spokeswoman Jenny Plecki said in an earlier update. She estimated that 450 homes were evacuated, half of which were occupied by full-time residents. The evacuation was ordered as flames started moving downslope toward the community, Chad Walker, incident commander for the U.S. Forest Service, told KSL-TV. Kelly Cannon, one of the residents forced to evacuate, said she saw the fire get very close to homes on her way out. 'I think the scariest thing was not knowing ... if it was going to come down on our street,' she said. 'We didn't know how far the fire had spread, but we could definitely see — I think the flames were like 3 feet high.' About 150 firefighters have been dispatched to battle the fire, Plecki added. The fire was last listed as about 1,500 acres in size, according to Utah Fire Info, an information source operated by state and federal fire agencies. It remained 0% contained as of 5 p.m. Friday. Police have also closed off Pine Valley Road several miles from where the fire is burning as a safety precaution. The cause of the fire is still being investigated, but authorities say it appears that the fire was caused by lightning. The fire was reported not long after a strike Thursday evening. Strong wind gusts in the area helped fan the fire closer to the Pine Valley community. The update comes as heat, wind and low relative humidity remain in the forecast Friday, prompting the National Weather Service to list most of the state in a red flag warning. 'Critical' fire weather conditions may remain across most of the state through Saturday evening. 'With the red flag conditions that we've had over these last few days, it made engaging the fire extremely difficult,' Walker said. The agency also issued a wind advisory for parts of western Utah, where gusts of up to 45-55 mph were forecasted for Friday ahead of a cold front that is forecast to lower temperatures this weekend. Meanwhile, Rocky Mountain Power, Utah's largest power provider, says it is monitoring the conditions and may temporarily cut power in parts of central and southern Utah until fire weather conditions improve. While the Forsyth Fire began Thursday evening, a large fire burning near Bryce Canyon National Park also grew as wind and other factors 'significantly' increased fire activity in the area. The France Canyon Fire, Utah's largest wildfire so far this season, has now scorched 9,575 acres, doubling in size over the last few days, according to the U.S. Forest Service. Wind gusts of up to 30 mph fanned flames and forced firefighters to take a 'tactical pause,' the agency reported on Friday. Red flag conditions forecast for Friday and Saturday could pose additional problems. Over 500 personnel are assigned to battle the wildfire, which remains 5% contained, but a complex incident management team has now been called in to bring more resources. The lightning-caused fire was first reported within Dixie National Forest on June 11. All Forest Service land south of state Route 12 within the Powell Ranger District remains closed. The Bridge Creek Fire, which is burning near the Utah-Arizona border east of Lake Powell, hasn't grown quite as much. It's now listed at 1,413 acres in size after experiencing 'minimal growth' on Thursday, the Northern Arizona Type 3 Incident Management Team reported on Friday. State and federal firefighters reported over a dozen new wildfires have started since Thursday; most were contained quickly. A fire that sparked in Salt Lake County late Friday also led to an I-80 closure. With strong wind gusts in the forecast through Saturday, Rocky Mountain Power says it may shut off power in some areas to prevent sparking new wildfires. It issued a 'Public Safety Power Shutoff Watch' for parts of southern and central Utah, extending up toward the southern end of the Wasatch Front. Communities like Dixie, Enterprise Valley, Cedar City, Milford, Panguitch, Richfield and Santaquin are mentioned in the advisory. Rocky Mountain Power officials say the outages are most likely to take place in those areas between 7 a.m. and 7 p.m. on Saturday. 'Community safety and reducing wildfire risk are our top priorities,' said Pete Singh, the company's incident commander, in a statement. 'We take the decision to turn off power very seriously. Public Safety Power Shutoffs will be targeted, precise and guided by real-time data from conditions on the ground.' While the U.S. Drought Monitor no longer lists any part of Utah in extreme drought for the first time in months, all parts of the state are now listed as 'abnormally dry' or in some level of drought, highlighting the potential fire danger. Contributing: Alex Cabrero
Yahoo
20-06-2025
- Yahoo
New Mexico wildfire map: Track Trout Fire as responders work to contain blaze
Editor's note: This article was updated to reflect the new total acreage impacted by the Trout Fire. For those heading to the mountains of New Mexico during the summer months, it could mean dealing with fires stemming from particularly dry conditions. The New Mexico Wildfire Map currently shows an active fire east of Gila, New Mexico. The Trout Fire is burning an estimated 38,708 acres. Currently, 755 personnel are assigned to the incident. The fire is burning through timber, grass, and dense six-foot brush, according to MAPO. The fire is 0% contained. N.M. Gov. Michelle Lujan Grisham has declared a state of emergency and secured federal Fire Management Assistance Grants in response to the Trout Fire. The declaration allocates $750,000 to the New Mexico Department of Homeland Security and Emergency Management for firefighting efforts, including the deployment of the New Mexico National Guard, according to a news release from the office of the governor. The fire tracker provides a map with pinpoint locations of each fire and shows where red flag warnings are in effect, among other information. You can also click on each point to see detailed information on the fire in that area. The U.S. Forest Service noted the fire was reported Thursday, June 12, in the Trout Creek area of the Gila National Forest. The Gila National Forest has implemented a closure order as the fire is not contained. Another adjacent fire over eight acres east of the Gila Forest. That, too, is not contained and was reported five days ago, according to the U.S. Forest Service. This article originally appeared on El Paso Times: New Mexico wildfire map: Track Trout Fire in real-time
