
Wi-Fi Technicians Reveal the 5 Worst Spots to Place Your Router
Obstructing the signal with furniture, walls or enclosed spaces weakens your connection and slows down your internet -- especially in rooms farther away from the router. If you want fast, reliable Wi-Fi throughout your home, placement matters more than you think.
"The main factor you have to consider is that Wi-Fi travels very well over open air, and it travels very poorly through hard material," said Julian, a technician with ThoseTechGuys in Renton, Washington. "The best place to put a router is centrally located out in the open away from any cabinets, kitchen, plumbing, walls, things like that."
Placing your router in a central location gives it the best chance at broadcasting a strong Wi-Fi signal evenly throughout your home.
Samantha De Leon / CNET
In general, the fewer obstructions around your router, the stronger your signal will be. Here's what not to do when you're setting up your router.
Read more: Should You Buy or Rent Your Router? Here's What I Learned $873 Later
Locating local internet providers
First mistake: Put your router on the floor
Putting your router on the floor won't completely kill your signal, but you won't be maximizing it, either. Think of your router like a light bulb. You want it to light up as large an area as possible. Putting a lamp on the ground will still provide some lighting, but not as much as putting it on a table.
Radio waves typically send their strongest signals downward, so placing your router in an elevated position will maximize your coverage. You can find wall mounts on Amazon, but I wouldn't recommend them -- attaching your router to a wall will block a good chunk of its signal. Instead, try placing it on a table or shelf, ideally with a foot or so of space from the wall.
Now Playing: Should you replace your router? Maybe!
05:55
Second mistake: Place your router behind the couch
If you look around the living room for the best place to put your router, the couch might jump out as a convenient hiding place. But this is a bad idea for the same reason you don't want to put it right against a wall or floor.
"You want to avoid as many hard materials that the Wi-Fi signal has to travel through as possible," Julian said.
A couch or armchair might not be as oversized of an impediment as a wall, but it will still weaken your Wi-Fi signal.
Third mistake: Stash your router in the basement
Some people dislike the look of their router so much that they stash it in the basement. But that violates one of the fundamental rules of home networking: Put your router where you use it the most -- and that's probably not in the basement. Basements also tend to have a lot of things that can interfere with a Wi-Fi signal.
"There's also a lot more noise in the basement," said David Maxey, a senior technician at IT support company NerdsToGo in Bellevue, Washington. "If you have fluorescent lighting, wiring or copper piping in the ground floor, that's definitely going to have some effect."
Fourth mistake: Hide your router away inside cabinets
A cabinet might seem like a clever solution to an unsightly router, but it's one of the few mistakes you can make that could actually damage your router. In addition to blocking the signal, keeping a router in an enclosed space could cause it to overheat. In late 2024, one woman in Florida lost her home in a fire that she says was started by her Wi-Fi router.
That's an extreme, worst-case scenario. What's more likely is that your router would degrade over time with inadequate airflow, with occasional periods of complete shutdown.
Fifth mistake: Set your router up near another Wi-Fi router
"Wi-Fi operates on its own spectrum of basically radio waves, so any device that broadcasts on the same spectrum is going to interfere with it. That includes other Wi-Fi devices," Julian told me.
Receiving devices like your TV or smart speaker will not mess with your Wi-Fi, but it will be a problem if you have other equipment like routers or gateways. That doesn't include mesh systems, which use multiple routers in tandem to spread a Wi-Fi signal throughout the home.
Why would someone have multiple routers if they're not part of a mesh system? It's more common than you might think, says Julian.
"People just don't know. You start with one device, like a router, and then your internet's not working as well as you want. So then you go buy another device," Julian says. "It's just a lack of knowledge that the devices should be in the same family, in the same system."
So, where should you put your router?
The best place to put your router is somewhere you can see it, such as a centrally located room. Ideally, it should be raised at least a few feet off the ground, with some open space between it and any walls or thick pieces of furniture.
That might be unwelcome news for those of us with eyesores for routers, but you can always hide your router inside a wicker basket or plastic crate. Just make sure the container isn't metal, which can interfere with a Wi-Fi signal.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Motor Trend
24 minutes ago
- Motor Trend
The Future Of Porsche's Racing Tech Transfer to Street Cars? Software.
On April 12, 2025, Porsche made history, becoming the first automaker to win three classes of professional motorsports with three different powertrains on the same day. In California, a 963 hybrid won the LMDh class and took the overall win at the IMSA Long Beach Grand Prix while a 911 GT3 R won the GTD Pro class in the same race with pure combustion engine. Across the country, the 99X Electric won the Miami e-prix in Formula E on pure battery power. Different as they may be, each shares a common link with the Porsche road cars you can buy today and in the future. Porsche uses motorsport to drive tech innovation, focusing on software as the key to improving road cars. Software impacts drivability and efficiency, with lessons from racing series shared across projects. This approach is cost-effective and enhances both performance and development. This summary was generated by AI using content from this MotorTrend article Read Next Racing Technology for the Street 'We have a philosophy that, yes, motorsport is part of our DNA,' Porsche vice president of motorsport, Thomas Laudenbach, told MotorTrend , 'and I cannot imagine Porsche without motorsport, but we are not doing motorsport for the sake of its own. We do motorsport to give a contribution to the company, and this is exactly what we are talking about.' In the past, tech transfer from racing to the road consisted mostly of more power and better aerodynamics, but as everything on a car has become linked and controlled by computers, the next frontier is in the software that controls them. Hard parts like engines, suspension, and aerodynamics are fairly mature technologies, but automotive software is still in its relative infancy. 'It is still a very steep curve,' Laudenbach said. 'It's growing so fast, it's changing so fast…I mean, if you look at the combustion engine, obviously development [today] is slower like this because you know, it is more and more difficult to make the [next] step. If you look at the software, not only software itself, how we approach it, the tools…I would say [it is] still very steep, the curve, how fast it changes.' It's All in the Software In all three racing series, physical parts on the cars are heavily regulated, particularly when it comes to batteries and electric motors. Software, though, isn't and has become the most important factor in improving lap times and efficiency. 'Everything you can do on the software has a much bigger impact and a much bigger effect in the drivability,' Porsche Formula E driver and reigning champion, Pascal Wehrlein, told MotorTrend , 'because yeah, there's also software things in in a combustion engine, but the effect is just smaller than an electric car. We pay a lot of attention to the software and I would say that is our biggest toolbox for setting up the car and getting quicker and so on. And there's just so many more things you can do on the software compared to a combustion engine. 'How much we are going into the details,' he continued, 'into the smallest details, I would say on the software side is even more than what I did when I was in Formula One, just because there are so many different options on, you know, the four-wheel drive, how to set up the four-wheel drive. How much work do you want to have at the front? At which point in time in the corner you want to have more front torque or less? What you can do on the braking side, on the [energy] recuperation, setting it up for different corners? In certain corners, where it's high speed, you need something different than in the low-speed corner, but then also when the track is bumpy, or not bumpy. We are going so much into the details.' Lauderbach agrees. 'It's absolutely right. We always love about talking about hardware. And I did develop combustion engines for 18 years, so I'm a real mechanical guy, and it's absolutely right, probably the bigger part is software. And but this is the good thing about it because some things [physical] we are not allowed to touch [under the regulations]. But we have a big freedom of software, and I think that's good because racing should give freedom where it is beneficial also for your brand. And that's certainly in software and I think this is probably also the biggest change between the projects.' Because the applications are so different, it's not as simple as just sharing code between teams in different series or with the engineers working on the road cars. Instead, it's the exchange of knowledge and ideas which brings this tech to cars like the 911 GTS T-hybrid. 'It's for sure not a carryover part,' Laudenbach said, 'but it's from learning about the difficulties, about the weak points, about the solutions, for sure they benefit from each other. 'When you have more than one project,' he said, 'you just work it on in a wider range and then you always find synergy. These two programs (Formula E and LMDh) benefit from each other in various areas. And at the same time, this is linked so close to our road car development. We work a lot on road cars as well in the motorsport department and do benefit from each other. If you tell your engineers, oh, please sit together with these guys from this program, then you know what they do? They sit together for an hour, they chat, and they go to it. If you sit side by side, if you meet each other with a coffee, this is the best way to benefit from each other. These two programs benefit, but also this is very beneficial to what we do on road cars, even inside the motorsport department.' It's not just about making the cars faster, either. Power makes heat, and heat needs to be dealt with before it breaks things, on a race car or a road car. Efficiency matters in racing because using less fuel or electricity allows you to go farther between pit stops, and it matters for the same reason on the street. 'Look at Formula E,' Laudenbach said. 'It's not our battery, but we control the thermal system [and] energy management. That's a lot of control systems. That's a lot of software. I mean, if we work with AI in the meantime and there you can learn a lot of the one side and transfer it to the other. Sometimes then you figure out that, okay, I can only take this because this [other technology] is not allowed. It's never carry over one to one. 'But you still learn a lot about how to handle it. It's software functions, it's control systems, it's sometimes also just the tools that we use, the approach that you take is not always [about] the final product. In the end, you have the product, there, no matter if it's software, hardware, but it's also, how do you approach it, because you're always looking for being most efficient. Especially Formula E, [where] we have a cost cap. It's a factor to say, okay, can I reach a certain goal with the smallest amount of money? These kind of things we always exchange because it's in the background.' Cheaper and Easier Not only are software learnings easier to transfer between programs, software is also easier to iterate on and less expensive to develop. 'Compared to hardware,' he said, 'it's not that cost intensive. Yes, you have you have the labor. But you know, you' not always having to change your bits and pieces. And don't forget, if you talk about bits and pieces, you always have to stop and throw parts away. So it's a lot more, let's say, cost efficient.' Whether in the office or trackside, the way data is managed and analyzed has changed a lot in the past decade. 'If we would do it like 10 years ago,' Lauderbach said, 'where the engineer himself goes through all the raw data, that doesn't work anymore. You got to feed your data through automatic analysis. It's just more [a question of], how do you analyze? How do you get something out in order to make the car quicker? This is a lot more or this is high sophisticated, a lot more automation and algorithms, than 10 years ago. 'It's a software basically to calculate what the car's doing because you got sensors. Obviously, you want to calculate some figures, you see what the car's doing in order to feature simulations. The simulation then gives you back again in which direction you have to go.'


Motor Trend
24 minutes ago
- Motor Trend
Rivian Is Integrating Google Maps Into Its Native Navigation Software
Fresh off major upgrades to its R1S SUV and R1T pickup, Rivian is now set to launch a software update of its onboard navigation system to include Google Maps data—both for the new vehicles it's producing and its existing customer cars. This isn't simply Google Maps like the app on your phone, however. Leveraging Google's Automotive SDK, Rivian has, in effect, overlaid its existing navigation experience over that of Google Maps, taking advantage of the internet giant's superior "routing, estimated time of arrivals, traffic updates, search capabilities, and satellite imagery," as Rivian put it, in order to further augment its own in-house "EV-friendly navigation features." Rivian is updating its R1S SUV and R1T pickup navigation systems to integrate Google Maps, blending Google's routing, traffic, and imagery with Rivian's EV-specific features. The update includes a new interface and extends to the Rivian Mobile App, rolling out starting tomorrow. This summary was generated by AI using content from this MotorTrend article Read Next In other words, Rivian's navigation system will now blend Google's superior mapping capabilities with its proprietary charging information, including estimated range and battery capacity remaining at your destination, route planning, real-time charging info, and more. In addition, Rivian skins the whole interface in its own design, a new version of which will also debut with the Google Maps update. Even better, Rivian says the update will extend to its Rivian Mobile App (a 2025 MotorTrend Best Tech award winner), which benefits from Google-like photos and descriptions of searched destinations, as well as satellite map views and real-time traffic data. As before, users can send trips and navigation destinations from the app to their Rivians, and now they'll be able to use the "share" function via Google Maps to do the same. The rollout of the new Google-augmented system is imminent—Rivian says it'll begin doing so as soon as tomorrow via an over-the-air update for every all-electric R1S SUV and R1T pickup it has sold to date, and it will come already equipped with every new model it sells.


Bloomberg
27 minutes ago
- Bloomberg
Put the Crypto in the Index Funds
The basic situation is that the US stock market will pay $2 for $1 worth of cryptocurrency. If a small public company has a $100 million pot of Bitcoin or Ethereum or Trumpcoin or what have you, its stock will be worth at least $200 million. This trade is baffling and magical; it was pioneered by MicroStrategy Inc. (which now calls itself Strategy, and which has about a $70 billion stash of Bitcoins and a $138 billion equity market capitalization 1), and is now regularly and successfully imitated by all sorts of random small companies. I make fun of this a lot, but it is worth asking what it means that the stock market will pay $2 for $1 worth of crypto. There are in principle three sorts of answers: