Japan PM Ishiba says disagreements remain with US on tariff talks
Japanese Prime Minister Shigeru Ishiba listens during a working session at the G7 Summit in Kananaskis. (AP pic)
CALGARY : Japan's Prime Minister Shigeru Ishiba said his country has not reached a comprehensive tariff agreement with the US as some disagreements persist between the two nations.
Ishiba, talking to reporters after the Group of Seven leaders' summit in Canada on Tuesday, emphasised the importance of securing a trade deal that benefits both countries while safeguarding Japan's national interests.
Ishiba, who was at his first G7 summit as prime minister, held tariff talks with US President Donald Trump on Monday, but the meeting ended without an agreement to lower or eliminate the 25% tariff Trump has imposed on Japanese auto imports.
Ishiba said US tariff measures were impacting the earnings of many Japanese companies, including those in the automobile sector, while causing a significant impact on the global economy.
'Both Japan and the US have continued sincere discussions, exploring the possibility of an agreement until the last moment,' he said. But Ishiba added there still remain points of disagreement between the two sides.
Ishiba's news conference in Calgary, Canada was held following a gathering of G7 leaders at the nearby Kananaskis mountain resort in the Canadian Rockies.
Ishiba also met other leaders for bilateral talks, including his first meeting with German Chancellor Friedrich Merz. The Japanese leader also discussed security relations with South Korean President Lee Jae-myung before heading back to Tokyo.
The summit ended without a joint statement of support from the group for Ukraine after Trump expressed support for Russian President Vladimir Putin and left the event a day early to address the Israel-Iran conflict.
On the Middle East, Ishiba said he had told G7 leaders that Iran's nuclear development was 'never tolerable' while stressing the importance of diplomatic efforts through dialogue.
Ishiba will participate in the Nato summit in the Netherlands next week, he added.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
The Sun
18 minutes ago
- The Sun
Trump's tax-cut and spending bill clears first US Senate hurdle
WASHINGTON: The US Senate narrowly approved a procedural vote on President Donald Trump's sweeping tax-cut and spending bill, setting the stage for an overnight debate. The Republican-controlled chamber voted 51-49, with two GOP senators joining Democrats in opposition. The 940-page bill, which funds immigration, military, and tax priorities, faced delays as Democrats demanded a full reading before debate could begin. Senate Democratic leader Chuck Schumer criticized the rushed process, calling it a 'radical bill' released 'in the dead of night.' Republican Senators Thom Tillis and Rand Paul opposed the bill, citing concerns over Medicaid cuts and increased federal debt. Trump criticised Tillis on social media, hinting at potential primary challengers. The legislation extends Trump's 2017 tax cuts, boosts military and border security spending, and raises the federal debt ceiling by $5 trillion. A nonpartisan analysis estimates the bill could add $4.5 trillion to the national debt over a decade. Elon Musk condemned the bill, calling it 'utterly insane and destructive' for ending electric vehicle tax breaks. Meanwhile, Republicans adjusted provisions to delay Medicaid cuts and support rural hospitals. If passed, the bill returns to the House for final approval before reaching Trump's desk.
Malay Mail
2 hours ago
- Malay Mail
Trump's ‘big, beautiful Bill' clears first US Senate hurdle after GOP drama
WASHINGTON, June 29 — The Republican-controlled US Senate advanced President Donald Trump's sweeping tax-cut and spending Bill in a key procedural vote late yesterday, raising the odds that lawmakers will be able to pass his 'big, beautiful Bill' in the coming days. The measure, Trump's top legislative goal, passed its first procedural hurdle in a 51 to 49 vote, with two Republican senators voting against it. The result came after several hours of negotiation as Republican leaders and Vice President JD Vance sought to persuade last-minute holdouts in a series of closed-door negotiations. The procedural vote, which would start debate on the 940-page mega-Bill to fund Trump's top immigration, border, tax-cut and military priorities, began after hours of delay. It then remained open for more than three hours of standstill as three Republican senators — Thom Tillis, Ron Johnson and Rand Paul - joined Democrats to oppose the legislation. Three others - Senators Rick Scott, Mike Lee and Cynthia Lummis — negotiated with Republican leaders into the night in hopes of securing bigger spending cuts. In the end, Wisconsin Senator Johnson flipped his no vote to yes, leaving only Paul and Tillis opposed among Republicans. Trump was monitoring the vote from the Oval Office late into the night, a senior White House official said. The mega-Bill would extend the 2017 tax cuts that were Trump's main legislative achievement during his first term as president, cut other taxes and boost spending on the military and border security. Nonpartisan analysts estimate that a version of Trump's tax-cut and spending Bill would add trillions to the US$36.2 trillion (RM153 trillion) US government debt. Democrats fiercely opposed the Bill, saying its tax-cut elements would disproportionately benefit the wealthy at the expense of social programs that lower-income Americans rely upon. Chuck Schumer, the Senate's top Democrat, demanded that the Bill be read aloud before debate could begin, saying the Senate Republicans were scrambling to pass a 'radical Bill'. 'If Senate Republicans won't tell the American people what's in this Bill, then Democrats are going to force this chamber to read it from start to finish,' the New York Democrat said. — Reuters
Malay Mail
2 hours ago
- Malay Mail
In the heat of summer, snowman cans face Trump's ‘chaotic' steel tariff storm
BELCAMP (Maryland), June 29 — In the sweltering US summer, metal containers decorated with snowmen and sleighs are taking shape — but tempers are also rising as their manufacturer grapples with President Donald Trump's steep steel tariffs. At Independent Can's factory in Belcamp, Maryland northeast of Baltimore, CEO Rick Huether recounts how he started working at his family's business at age 14. Huether, now 73, says he is determined to keep his manufacturing company afloat for generations to come. But Trump's tariffs are complicating this task. 'We're living in chaos right now,' he told AFP. Since returning to the presidency in January, Trump imposed tariffs of 25 per cent on imported steel and aluminium — and then doubled the rate to 50 per cent. This has weighed on operations at Independent Can, and Huether expects he eventually will have to raise prices. Not enough tinplate With the steady beat of presses, steel plates that have been coated with tin — to prevent corrosion — are turned into containers for cookies, dried fruit, coffee and milk powder at Huether's factory. But there is not enough of such American-made tinplate for companies like his. 'In the United States, we can only make about 25 per cent of the tinplate that's required to do what we do,' in addition to what other manufacturers need, Huether said. 'Those all require us to buy in the neighbourhood of 70 per cent of our steel outside of the United States,' he added. CEO of Independent Can Company Rick Huether poses for a photo in the company's manufacturing facility in Belcamp, Maryland, June 25, 2025. — AFP pic While Huether is a proponent of growing the US manufacturing base, saying globalisation has 'gone almost a little bit too far,' he expressed concern about Trump's methods. Trump has announced a stream of major tariffs only to later back off parts of them or postpone them, and also imposed duties on items the country does not produce. For now, Independent Can — which employs nearly 400 people at four sites — is ruling out any layoffs despite the current upheaval. But Huether said one of the company's plants in Iowa closed last year in part because of a previous increase in steel tariffs, during Trump's first presidential term. Price hikes With steel tariffs at 50 per cent now, Huether expects he will ultimately have to raise his prices by more than 20 per cent, given that tinplate represents a part of his production costs. Some buyers have already reduced their orders this year by 20 to 25 per cent, over worries about the economy and about not having enough business themselves. Others now seem more inclined to buy American, but Huether expressed reservations over how long this trend might last, citing his experiences from the Covid-19 crisis. 'During the pandemic, we took everybody in. As China shut down and the ports were locked up, our business went up 50 per cent,' he explained. But when the pandemic was over, customers turned back to purchasing from China, he said. 'Today if people want to come to us, we'll take them in,' he said, but added: 'We need to have a two-year contract.' Huether wants to believe that his company, which is almost a century old after being founded during the Great Depression, will weather the latest disruptions. 'I think that our business will survive,' he said, but added: 'It's trying to figure out what you're going to sell in the next six months.' — AFP
