Latest news with #ANZÁProject
Associated Press
17-07-2025
- Business
- Associated Press
Orosur Drills 62.3m @ 12.76g/t Au at Pepas
Orosur Mining Inc - Exceptional results at Pepas LONDON, GB / ACCESS Newswire / July 17, 2025 / Orosur Mining Inc. ('Orosur' or the 'Company') (TSXV:OMI)(AIM:OMI), is pleased to announce an update on the progress of exploration activities at the Company's flagship Anzá Project ('Project') in Colombia. Colombia - ANZÁ Project The Anzá Project is now 100% owned by the Company following completion of a Share Purchase Agreement ('SPA'), announced 28th November 2024, whereby the Company purchased all of the shares of its previous JV partner; Minera Monte Aguila ('MMA'). The Project, which is located 50km west of Medellin, is easily accessible and boasts excellent infrastructure including water, power and communications as well as a large exploration camp. The Project sits within the prolific mid-Cauca belt, Colombia's primary gold belt, and is located along strike between several world class gold/copper deposits including Buritica, Quebradona and Guayabales/Marmato (Figure 1). From September 2018 to November 2024, the Anzá Project was under the control of its previous JV partner MMA, itself a 50/50 venture between the world's two largest gold miners, Agnico Eagle Mines and Newmont Mining. Figure 1. Mid-Cauca Belt Prospects The Company is currently focussed on three prospects within the Anzá Project - Pepas, APTA and El Cedro. All three prospects are within the same granted exploration title that is broken into two, non-contiguous pieces (Figure 2). Drilling is currently being undertaken at the Pepas prospect in the northern extent of the Anzá Project (pre-acquisition) over 10km north of the central base camp at APTA. In parallel, mapping and sampling is being undertaken over the El Cedro porphyry system in the south of the project area. Figure 2. Main prospects, licences pre-MMA acquisition Pepas Prospect Pepas was discovered by MMA in late 2021 by BLEG sampling and geological mapping, followed by 11 diamond drill holes in 2022 (PEP001 to PEP011). After completion of the transaction to buy MMA ('Transaction'), the Company restarted drilling at Pepas in late-November 2024. Drilling commenced with hole PEP012, which was positioned to confirm previous high-grade results in holes PEP001, PEP005 and PEP007 drilled in 2022. Figure 3. Plan of holes Drilling at Pepas, post Transaction, has largely concentrated on a small central core, where a body of high-grade gold mineralisation is being defined from surface. Additional drilling has also been undertaken around this central core to understand the wider geological context and as the commencement of a larger scale exploration program. Of the nine holes discussed in this announcement, six (PEP038 to PEP043) were drilled around but outside the Pepas core, while three (PEP044 to PEP046) have been drilled as part of the previously announced infill program that is designed to move Pepas to a Mineral Resource Estimate (MRE). PEP038 was drilled to the north at what is referred to as Pepas North. This was the third of three holes drilled here as the first move to this area, following up positive surface geochemical results. This hole was drilled orthogonal to the two previous holes, to provide the maximum lithological and structural information. PEP038 returned a result of 16.8m @ 0.68g/t Au. As with the two previous holes in this vicinity, this hole demonstrates the scale of the epithermal system that hosts Pepas and has provided valuable information to understand the controls of this system. PEP039 was a speculative exploration hole drilled a substantial distance to the south and west of the Pepas core, following up zones of surface silicification. No substantial results were returned. PEP040 was drilled outside the known Pepas envelope to the SW, to test lower-level shallow mineralisation previously identified by earlier drilling. The hole returned a small intersection of 10.25m @ 1.35g/t Au from surface (figure 4) that indicates the potential for a body of satellite mineralisation, adjacent to the Pepas core, that will require additional follow up. Figure 4. PEP040 and PEP046 section PEP041 was drilled outside the currently known Pepas envelope to the north to test the northward extension of the mineralisation first identified by earlier drilling undertaken by the Company's previous JV partner MMA. This hole returned a positive intersection of 31.75m @ 2.01 g/t Au, opening this area for potential extension (figure 5). Figure 5. PEP041 Section PEP042 was drilled to the NE of the currently known central core of mineralisation as a conceptual hole to test geophysical zones that were identified by the recent airborne magnetic survey. No surface geochemical work has yet been undertaken in this area. Several thin zones of encouraging gold mineralisation were encountered in this hole, well outside the known mineralised core (figure 6). This result has substantially increased the potential of this area and will now be followed up with surface mapping and sampling, and potentially later drilling. Figure 6. PEP042 Section PEP043 was drilled outside the known mineralised envelope to test areas of surface silicification. No substantial intersections were recorded Holes PEP044, PEP045 and PEP045 were all drilled as part of the previously announced MRE infill program at Pepas. A plan for this program has been developed to infill Pepas to sufficient degree to potentially allow a high level (measured and indicated) MRE to be calculate, but also to assist in understanding the controls upon mineralisation and to better define the very high-grade zones that have the potential to add substantial ounces. Results from these holes were exceptional, with PEP044 returning 38.5m @ 6.01g/t Au, PEP045 returning 62.3m @ 12.76g/t Au and PEP046 returning 53.2m @ 3.36g/t Au (figures 4 and 7). The Company feels these results vindicate its decision to begin the resource drilling phase at Pepas, with these exceptionally thick, and high-grade results, substantially upgrading the potential for contained ounces beyond what had been assumed at the commencement of the process. In addition, the results, particularly that of PEP045, have provided valuable insight to the primary controls upon this mineralisation, suggestive of the main feeder zone being a series of steeply dipper structures along the SW margin of the zone. The depth extent implications of this theory will be tested in later drilling Figure 7. PEP044 and PEP045 section Drill intersections for these most recent holes are as follows: Table 1. Latest drill Intercepts, Pepas Prospect Geological Modelling As previously announced, Company geological teams, in cooperation with an external consultant are currently engaged in a comprehensive review and reinterpretation of all drilling undertaken on the Anzá project since its inception in roughly 2012, with particular focus on the APTA and Pepas prospects as these both have near-term resource potential. The results thus far are highly encouraging, with recent insights suggesting substantively different genetic theories to that put forward by the previous owners of the ANZÁ project and the Company's previous JV partner. These concepts are being finalised now, which will lead to exploration plans being formalised to run in parallel with the ongoing resource infill program at Pepas. Holes Drilled post MMA Transaction 26 holes have been drilled at Pepas since the MMA Transaction in November 2024. Assay results are tabulated below. Table 2. Results to date, post MMA Transaction Orosur CEO Brad George commented: 'The latest results at Pepas are exciting. Not only do we continue to expand the area of potential that will require drill follow-up, but the commencement of resource drilling has exceeded all expectations, with some of the thickest and highest grade intersections seen anywhere in the world. We have only just begun.' For further information, visit follow on X @orosurm or please contact: Orosur Mining Inc Louis Castro, Chairman, Brad George, CEO [email protected] Tel: +1 (778) 373-0100 SP Angel Corporate Finance LLP - Nomad & Joint Broker Jeff Keating / Jen Clarke / Devik Mehta Tel: +44 (0) 20 3470 0470 Turner Pope Investments (TPI) Ltd - Joint Broker Andy Thacker/James Pope Tel: +44 (0)20 3657 0050 Flagstaff Communications and Investor Communications Tim Thompson Mark Edwards Fergus Mellon [email protected] Tel: +44 (0)207 129 1474 The information contained within this announcement is deemed by the Company to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014 ('MAR') which has been incorporated into UK law by the European Union (Withdrawal) Act 2018. Upon the publication of this announcement via Regulatory Information Service ('RIS'), this inside information is now considered to be in the public domain. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Drill Hole Details - Pepas prospect 2022/2024 Programme* * Coordinates WGS84, UTM Zone 18 About Orosur Mining Inc. Orosur Mining Inc. (TSXV:OMI)(AIM:OMI) is a minerals explorer and developer currently operating in Colombia, Argentina and Nigeria. About the Anzá Project Anzá is a gold exploration project, comprising three exploration licences, and a large number of licence applications, totalling 399km2, in the prolific Mid-Cauca belt of Colombia. The Anzá Project is currently wholly owned by Orosur via its subsidiaries, Minera Anzá S.A. and Minera Monte Aquila S.A.S. The project is located 50km west of Medellin and is easily accessible by all-weather roads and boasts excellent infrastructure including water, power, communications and large exploration camp. Qualified Persons Statement The information in this news release was compiled, reviewed, verified and approved by Mr. Brad George, BSc Hons (Geology and Geophysics), MBA, Member of the Australian Institute of Geoscientists (MAIG), CEO of Orosur Mining Inc. and a qualified person as defined by National Instrument 43-101. Orosur Mining Inc. staff follow standard operating and quality assurance procedures to ensure that sampling techniques and sample results meet international reporting standards. Drill core is split in half over widths that vary between 0.3m and 2m, depending upon the geological domain. One half is kept on site in the Minera Anzá core storage facility, with the other sent for assay. Industry standard QAQC protocols are put in place with approximately 10% of total submitted samples being blanks, repeats or Certified Reference Materials (CRMs). Samples for holes PEP-001 to PEP-011 were sent to the Medellin preparation facility of ALS Colombia Ltd, and then to the ISO 9001 certified ALS Chemex laboratory in Lima, Peru. Samples from PEP-012 onwards are sent to Medellin laboratory of Actlabs for preparation and assay. 30 gram nominal weight samples are then subject to fire assay and AAS analysis for gold with gravimetric re-finish for overlimit assays of >5 g/t. ICP-MS Ultra-Trace level multi-element four-acid digest analyses may also undertaken for such elements as silver, copper, lead and zinc, etc. Gold intersections are reported using a lower cut-off of 0.3g/t Au over 3m. Intersections are quoted as downhole thicknesses. True thicknesses are unknown. Forward Looking Statements All statements, other than statements of historical fact, contained in this news release constitute 'forward looking statements' within the meaning of applicable securities laws, including but not limited to the 'safe harbour' provisions of the United States Private Securities Litigation Reform Act of 1995 and are based on expectations estimates and projections as of the date of this news release. Forward-looking statements include, without limitation, the continuing focus on the Pepas prospect, the exploration plans in Colombia and the funding of those plans, and other events or conditions that may occur in the future. There can be no assurance that such statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such forward-looking statements. Such statements are subject to significant risks and uncertainties including, but not limited to, those described in the Section 'Risks Factors' of the Company's MD&A for the year ended May 31, 2024. The Company's continuance as a going concern is dependent upon its ability to obtain adequate financing, to reach profitable levels of operations and to reach a satisfactory closure of the Creditor´s Agreement in Uruguay. These material uncertainties may cast significant doubt upon the Company's ability to realize its assets and discharge its liabilities in the normal course of business and accordingly the appropriateness of the use of accounting principles applicable to a going concern. The Company disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events and such forward-looking statements, except to the extent required by applicable law. This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact [email protected] or visit SOURCE: Orosur Mining Inc press release
Associated Press
10-03-2025
- Business
- Associated Press
Orosur Mining Inc - Opening new fronts at Anzá
Orosur Mining Inc - opening new fronts at Anzá LONDON, UNITED KINGDOM / ACCESS Newswire / March 10, 2025 / Orosur Mining Inc. ('Orosur' or the 'Company') (TSXV:OMI)(AIM:OMI), is pleased to announce an update on the progress of exploration activities at the Company's flagship Anzá Project ('Project') in Colombia. ANZÁ Project The Anzá Project is now 100% owned by the Company following completion of a Share Purchase Agreement ('SPA'), announced 28th November 2024, whereby the Company purchased all of the shares of its previous JV partner, Minera Monte Aguila ('MMA'). The Project is located 50km west of Medellin and is easily accessible by all-weather roads and boasts excellent infrastructure including water, power and communications as well as a large exploration camp. The Project sits within the prolific mid-Cauca belt, Colombia's primary gold belt, and is located along strike between several world class gold/copper deposits including Buritica, Quebradona and Guayabales/Marmato (Figure 1.) From September 2018 to November 2024, the Anzá project was under the control of its previous JV partner MMA, itself a 50/50 venture between the world's two largest gold miners, Agnico Eagle Mines and Newmont Mining. As such, the Company has only been back in control of the Project for less than four months. Figure 1. Mid-Cauca Belt Prospects The Company is currently focussed on three prospects within the Anzá Project - Pepas, APTA and El Cedro. All three prospects are within the same granted exploration title that is broken into two, non-contiguous pieces (Figure 2). Drilling is currently being undertaken at the Pepas prospect in the northern extent of the Anzá Project (pre-acquisition) over 10km north of the central base camp at APTA. Post the MMA acquisition in late November 2024, the Company more than doubled its land holding in the mid-Cauca belt to 400km2, by virtue of gaining ownership of a large number of licence applications held by MMA. This makes the Company one of the major land holders in one of the world's most exciting gold belts. These applications have yet to be properly assessed by the Company as most financial and management resources have thus far been directed to drilling at Pepas Figure 2. Main prospects, licences pre-MMA acquisition Pepas Prospect Pepas was discovered by MMA in late 2021 by BLEG sampling and geological mapping, followed by 11 diamond drill holes in 2022 (PEP001 to PEP011). After completion of the transaction to buy MMA, the Company restarted drilling at the Pepas prospect in late-November 2024. Drilling commenced with hole PEP012, which was positioned to confirm previous high-grade results in holes PEP001, PEP005 and PEP007 drilled in 2022. Later holes were then rotated clockwise from PEP012 to begin to test what was considered by Company geological teams to be the controlling trend of SE to NW. The primary objective of the first phase of drilling by the Company was to attempt to understand the geological controls upon mineralisation first identified in 2022, so as to provide guidance for later step out drilling. Holes drilled and announced to date (PEP012 to PEP027) have all intersected substantial sequences of gold mineralisation, largely from surface, thus far manifested as a thick wedge of silicified tuffs within the keel of two converging faults. Chemical analysis suggests the mineralisation to be possibly a variant of a high sulphidation epithermal style, but with just over 1100m drilled thus far, there is yet insufficient information to fully define its genesis, structural controls or source. By definition, this style of mineralisation, is the shallower expression of a deeper source, which has yet to be examined as drilling has focussed on the high grade near surface material. Figure 2. Plan of holes Of these current five holes, two (PEP023 and PEP024) were drilled some distance from the currently defined core deposit, to test a small, medium grade outcrop of silicified material. Moderate intersections were recorded in complex series of veins in a different domain to previous drilling. This opens up a new target and will require more work. Hole PEP025 was drilled on section with PEP014, 021 and 022, to complete this section and to better define a central high-grade core around which a future resource might be developed. Hole PEP026 was drilled in the NW end underneath the discovery hole PEP001, to test a structure identified in early drilling. Broken ground was intersected in shallower sections, before a substantial gold intersection lower in the hole. PEP027 was drilled beyond the SE margin of previous drilling to test the depth extent of a large, silicified outcrop that was mapped to the south of the current area of focus, with a substantial thickness of gold mineralisation being intersected. The nature of this material suggests a later phase of mineralisation from the two main events seen to date, one that is slightly lower in grade than that so far defined. However, this zone appears thick and on surface, outcrop extends some distance southward and will be followed up in later drilling extending southward. Drill intersections for these most recent five holes are as follows: Table 1. Drill Intercepts Discussion Drilling thus far has been largely focussed within an area of roughly 150m x 150m. This has been done intentionally, both because the thick, high-grade mineralisation is potentially amenable to being moved to an economic resource very quickly, even within a small area, but also to allow time for development of targets and physical access toward the north where previously announced surface geochemistry has suggested substantial extension potential. As announced on February 4th 2025, previous surface geochemistry collected by MMA, has identified a large, highly anomalous region to the north of the current Pepas mineralisation. Company geological teams have begun to expand on this work, resulting in the identification of a large, highly mineralised channel sample some 200m north of the limit of current drilling (Figure 4). The Company is advanced in planning to move the drill rig into this zone, however this requires not only greater geological understanding to direct drilling, but also the development of physical access for rigs and machinery. While access work continues, the Company has just begun a drone aeromagnetic survey over the Pepas area, designed to provide high resolution geophysical data to assist in increasing understanding of the structural architecture of the Pepas deposit. This survey is expected to be completed within a week, with data being made available later in March. It is hoped these data may shed light on the sense of movement of later faults that would seem to have broken up the mineralisation, as well as providing vectors to a deeper source. Figure 4. Pepas soil sampling Metallurgy Last week a bulk composite sample of Pepas mineralisation was sent to a metallurgical laboratory in Canada for the first phase of metallurgical testing for Pepas. This work will be preliminary in nature, designed to provide guidance and parameters for future feasibility related metallurgical work. Holes Drilled post MMA transaction 14 holes have been drilled at Pepas since the MMA transaction in November 2024. Assay results are tabulated below. Table 2. Results to date, post MMA transaction El Cedro The El Cedro (and El Roble) prospect lies to the south of the same integrated licence that hosts both Pepas and APTA, and is roughly 4km south of the APTA base camp. Work on the area began some years ago before Orosur's tenure, when Anglo American undertook reconnaissance mapping and sampling, identifying a highly prospective gold/copper porphyry system. Little work was then undertaken until late 2021, when the Company's previous JV partner MMA re-entered the area to carry out mapping, sampling and ground geophysics that largely confirmed Anglo American's previous work and mapped several large dioritic intrusions and associated epithermal systems. Sampling was limited to creeks and drainages, and several small areas in the centre of the zone. However, wide areas of gold anomalism were identified in soils and channel samples, with assays above 5g/t Au identified across a large area, with associated copper and molybdenum anomalism (Figure 5). Older airborne magnetic data suggests the presence of a large intrusive complex demonstrating a 'ring' structure, often seen in such environments. The Company is currently in the advanced stages of logistical planning and socialisation to allow a large-scale sampling program to commence as soon as possible. Work will concentrate on confirmation of the previous phases of work by Anglo American and MMA and expanding the scope with ridge and spur soil sampling over a 2km x 2km area. It is hoped work can commence in March. Figure 5. El Cedro Sampling - historical and planned - over airborne magnetics Orosur CEO Brad George commented: 'Anzá has come a long way in no time at all. Pepas began with a bang and is now well into the phase of serious geological work to assess its size and metallurgical characteristics. In parallel, we are now commencing work at El Cedro to hopefully confirm this as a large gold porphyry system. Added to APTA and El Pantano we hope to soon have multiple major gold irons in the fire during a bouyant gold market - all owned 100%.' For further information, visit follow on X @orosurm or please contact: Orosur Mining Inc Louis Castro, Chairman, Brad George, CEO [email protected] Tel: +1 (778) 373-0100 SP Angel Corporate Finance LLP - Nomad & Joint Broker Jeff Keating / Jen Clarke / Devik Mehta Tel: +44 (0) 20 3470 0470 Turner Pope Investments (TPI) Ltd - Joint Broker Andy Thacker/James Pope Tel: +44 (0)20 3657 0050 Flagstaff Communications and Investor Communications Tim Thompson Mark Edwards Fergus Mellon [email protected] Tel: +44 (0)207 129 1474 The information contained within this announcement is deemed by the Company to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014 ('MAR') which has been incorporated into UK law by the European Union (Withdrawal) Act 2018. Upon the publication of this announcement via Regulatory Information Service ('RIS'), this inside information is now considered to be in the public domain. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Drill Hole Details - Pepas prospect 2022/2024 Programme* Hole ID Easting (m) Northing (m) Elevation asl (m) Dip (°) Azimuth (°) PEP-001 403384 705000 1001 -50 150 PEP-002 403384 705000 1001 -60 290 PEP-003 403240 705142 1001 -49.60 95.2 PEP-004 403508 705671 838 -59.8 99.8 PEP-005 403373 704990 1008 -49.8 94.6 PEP-007 403374 704990 1008 -69.9 170 PEP-008 403232 704803 971 -50 60 PEP-009 403032 705057 1055 -50 80 PEP-010 403375 705106 982 -50.31 190.4 PEP-011 403573 704939 1001 -50.3 255 PEP-012 403415 704890 997 -56 352 PEP-013 403413 704887 997 -50 43 PEP-014 403400 704910 1007 -50 43 PEP-015 403375 704938 1017 -50 43 PEP-016 403326 704912 999 -50 43 PEP-017 403365 704848 976 -40 47 PEP-018 403345 704851 977 -45 43 PEP-019 403446 704890 991 -45 43 PEP-020 403446 704890 991 -75 43 PEP-021 403424 704935 1012 -62 223 PEP-022 403424 704935 1012 -42 223 PEP-023 403245 704927 969 -50 43 PEP-024 403245 704927 969 -78 43 PEP-025 403369 704888 1001 -45 43 PEP-026 403339 704955 1008 -63 50 PEP-027 403468 704909 1003 -46 228 * Coordinates WGS84, UTM Zone 18 About Orosur Mining Inc. Orosur Mining Inc. (TSXV: OMI; AIM: OMI) is a minerals explorer and developer currently operating in Colombia, Argentina and Nigeria. About the Anzá Project Anzá is a gold exploration project, comprising three exploration licences, a small exploitation permit and a large number of licence applications, totalling 399km2, in the prolific Mid-Cauca belt of Colombia. The Anzá Project is currently wholly owned by Orosur via its subsidiaries, Minera Anzá S.A. and Minera Monte Aquila S.A.S. The project is located 50km west of Medellin and is easily accessible by all-weather roads and boasts excellent infrastructure including water, power, communications and large exploration camp. Qualified Persons Statement The information in this news release was compiled, reviewed and verified by Mr. Brad George, BSc Hons (Geology and Geophysics), MBA, Member of the Australian Institute of Geoscientists (MAIG), CEO of Orosur Mining Inc. and a qualified person as defined by National Instrument 43-101. Orosur Mining Inc. staff follow standard operating and quality assurance procedures to ensure that sampling techniques and sample results meet international reporting standards. Drill core is split in half over widths that vary between 0.3m and 2m, depending upon the geological domain. One half is kept on site in the Minera Anzá core storage facility, with the other sent for assay. Industry standard QAQC protocols are put in place with approximately 10% of total submitted samples being blanks, repeats or Certified Reference Materials (CRMs). Samples for holes PEP-001 to PEP-011 were sent to the Medellin preparation facility of ALS Colombia Ltd, and then to the ISO 9001 certified ALS Chemex laboratory in Lima, Peru. Samples from PEP-012 onwards are sent to Medellin laboratory of Actlabs for preparation and assay. 30 gram nominal weight samples are then subject to fire assay and AAS analysis for gold with gravimetric re-finish for overlimit assays of >5 g/t. ICP-MS Ultra-Trace level multi-element four-acid digest analyses may also undertaken for such elements as silver, copper, lead and zinc, etc. Gold intersections are reported using a lower cut-off of 0.3g/t Au over 3m. Forward Looking Statements All statements, other than statements of historical fact, contained in this news release constitute 'forward looking statements' within the meaning of applicable securities laws, including but not limited to the 'safe harbour' provisions of the United States Private Securities Litigation Reform Act of 1995 and are based on expectations estimates and projections as of the date of this news release. Forward-looking statements include, without limitation, the continuing focus on the Pepas prospect, the exploration plans in Colombia and the funding of those plans, and other events or conditions that may occur in the future. There can be no assurance that such statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such forward-looking statements. Such statements are subject to significant risks and uncertainties including, but not limited to those described in the Section 'Risks Factors' of the Company's MD&A for the year ended May 31, 2024. The Company's continuance as a going concern is dependent upon its ability to obtain adequate financing, to reach profitable levels of operations and to reach a satisfactory closure of the Creditor´s Agreement in Uruguay. These material uncertainties may cast significant doubt upon the Company's ability to realize its assets and discharge its liabilities in the normal course of business and accordingly the appropriateness of the use of accounting principles applicable to a going concern. The Company disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events and such forward-looking statements, except to the extent required by applicable law.
