Latest news with #EufyMake
The Verge
5 days ago
- Business
- The Verge
Anker is no longer selling 3D printers
In March, charging giant Anker announced it would spin out its 3D printer business into an 'independent sub-brand,' stating that the new EufyMake would 'continue to provide comprehensive customer service and support' for its original 3D printers the AnkerMake M5 and M5C. Now, the 3D printing community is wondering whether that was all a euphemism for exiting the 3D printer business. eufyMake is no longer selling any 3D printers and has stopped selling some of the parts it would need to provide anything close to 'comprehensive support.' Anker confirms to The Verge that it has stopped selling the M5 and M5C 3D printers indefinitely. Spokesperson Brett White could not confirm that the company will resume selling them or create any future models. He says that 'sales have been paused.' 'My understanding is that eufyMake has not ruled out creating new 3D printer models in the future. But the brand has ended sales of the M5 and M5C for the time being,' White tells The Verge. The 3D printing section of EufyMake's website is currently empty of printers. The only gadget EufyMake now sells is a UV printer that creates a 3D texture atop flat materials. To put it mildly, Anker had a rough start in the 3D printer business. It set out to fix big pain points with 3D printing with the original M5, but ran into many issues that I documented in my original review. The M5C was both more affordable and better appreciated by the community but sacrificed features like a dedicated screen. Makers ran into their share of issues with it too. Now, Redditors are also reporting they can no longer easily obtain the most critical parts for the M5C — the hotend that melts and deposits the plastic. 'Due to inventory reasons, the M5C hot end has been removed from the official website and is no longer available for purchase,' reads an alleged email from EufyMake support to one Redditor (hit the right arrow twice to see the screenshot): 'So my entire 3D printer is garbage because you stopped supporting it?' the Redditor replied. (Hotends are often one of the first components you replace if or typically when a 3D printer jams.) Anker also appears to have stopped selling the full extruder assembly for the M5C. I feel for you if you bought one of these printers. 'A portion of the AnkerMake accessories for 3D printers are no longer publicly listed for sale, but customers can always reach out to the customer support team directly by emailing support@ if they need any related accessories,' White tells The Verge. He says he'll look into the specifics of M5C hotend and extruder availability for us. Anker isn't the only company that's had difficulty moving into the next, more consumer-friendly and affordable phase of the 3D printing business. Creality also had a mess on its hands with the K1, a printer designed to compete with the AnkerMake M5, though it recovered from some of its issues by quickly moving to new and improved models. Today, the friendliest 3D printers I can recommend are the Bambu P1S and P1P, and the Elegoo Centauri Carbon, which doesn't offer all the same conveniences of Bambu, but meets the P1 series' print quality, adds a touchscreen, and starts at an incredibly low price of $300. I've been testing my own personally owned P1P against Bambu's flagship H2D and a Centauri Carbon. While using the Bambu is faster and easier, especially with an AMS attached, I would happily buy the Elegoo if I were more concerned about the Bambu update controversy. Posts from this author will be added to your daily email digest and your homepage feed. See All by Sean Hollister Posts from this topic will be added to your daily email digest and your homepage feed. See All Gadgets Posts from this topic will be added to your daily email digest and your homepage feed. See All Report Posts from this topic will be added to your daily email digest and your homepage feed. See All Tech
Entrepreneur
26-06-2025
- Business
- Entrepreneur
3D Printer Breaks Kickstarter Record, Raises $44M
The Kickstarter campaign is the most funded project in the history of the crowdfunding site, with pledges from 17,220 individual backers. When eufyMake, the creative tool brand under electronics company Anker Innovations, launched a Kickstarter campaign in April, it had an ambitious goal — to raise half a million dollars within two months to fund a new 3D printer, capable of printing designs on everything from blocks of wood to tote bags. The campaign immediately took off, raising over $10 million in 14 hours, according to a press release. Now, with less than two days to go before the campaign ends, Seattle-based eufyMake has raised over $44 million, breaking the Kickstarter record for the most funded project in the history of the crowdfunding site. (The previous record of $41.7 million was set by fantasy author Brandon Sanderson's Kickstarter campaign in March 2022 for four new novels.) "We're incredibly grateful for the overwhelming support from our backers," Frank Zhu, senior vice president of Anker Innovations and Eufy business group lead, stated in the press release. "Thanks to our community, we're not just launching a product — we're helping more people turn their ideas into something real." Related: A 3D Printer Used By Microsoft, Ford, and NASA Is Now Commercially Available — Here's What It Can Do The product that has garnered interest from 17,220 individual backers is EufyMake's UV printer, which could enable businesses to create new products. UV printers, or ultraviolet curing inkjet printers, use UV light to dry inks instantly as they are printed on a variety of materials, like wood, metal, and glass. EufyMake claims to have made the world's first personal UV printer, the E1. The printer turns 2D designs into 3D-textured artwork, with no prior experience with the technology required. A user places any surface under the printer and can print out a personalized message, photo, or design on the surface. There's a 3D element — the printer can stack filament to create texture in the finished product. The E1 is capable of printing directly on objects like phone cases, laptops, tote bags, cups, or banners, opening the doors for businesses that focus on customized products. The printer has a maximum print area of 180 by 130 millimeters, and can work with objects up to 50 millimeters thick. Related: 'Creators Left So Much Money on the Table': Kickstarter's CEO Reveals the Story Behind the Company's Biggest Changes in 15 Years The E1 costs nearly $2,000, but the price tag hasn't deterred backers. One popular option on Kickstarter, with over 3,700 backers at the time of writing, is the sold-out $1,970 early bird E1 rotary bundle, which allows users to print on cups, tumblers, and ceramic mugs as well as print 3D textures up to 5 millimeters in height on solid surfaces. The estimated delivery for the bundle is in July. Options still available for sale include the E1 Basic Bundle kit, which is priced at $1,900. The bundle is capable of printing 3D textures that are up to 5 millimeters in height on metal, wood, acrylic, ceramic, and solid materials. Nearly 100 backers have chosen this option at the time of writing, and the estimated delivery window for the product is in August. The most expensive option still available for sale is the $2,752 deluxe bundle, which allows users to print designs on fabrics like tote bags, wallets, and hats, as well as print on flat surfaces like banners. The E1 Kickstarter campaign closes on June 28 at 9:57 a.m. Eastern Time.
CNET
25-06-2025
- CNET
This Fantastic UV Printer Has Become the Most Funded Kickstarter of All Time
James Bricknell/CNET Update: With just three days to go, the EufyMake E1 UV printer has become the most backed Kickstarter of all time. At the time this is being updated, it has a total of $44,257,919 in pledges. Before the E1, the highest was a Kickstarter by fantasy author Brandon Sanderson, which topped out at $1.7 million. Frank Zhu, senior vice president of Anker Innovations and head of Eufy, said, "We are truly excited by the response to the EufyMake UV Printer E1 on Kickstarter. It reflects a strong global demand for personal creative tools that spark creativity and empower individuals," a sentiment I've seen growing across the maker space in the last few years. People are more creative than ever and want tools to help them express themselves in new and interesting ways. The E1 has all the parts needed to make that happen, with a few caveats that I speak about in my hands-on below. Hands-on with the E1 As the resident printing expert here at CNET, I get a lot of interesting tech that comes through my testing lab. Most of the products fall into one of two creative camps: additive or subtractive. Additive products can be 3D printers like the Bambu Lab H2D that use plastic material or resin to build up a 3D model that becomes a fully 3D object in the world, or 2D printers that use ink to print on a flat medium. My best list contains paper printers, sublimation printers and apparel printers, all of which create different end results. Subtractive products like laser engravers remove material by cutting or burning to create either 3D or 2D images. UV printers are a hybrid of 3D and 2D printers. They use CMYK (Cyan, Magenta, Yellow and Black) inks and a white resin-style ink that is cured with a UV light to build up a shallow 3D image on a hard surface. Most of them are industrial and cost several thousand, if not tens of thousands, of dollars. EufyMake, formerly AnkerMake, has launched a Kickstarter for the E1, which it is calling the "world's first personal 3D-texture UV printer." I've spent several months testing it and printed over 100 different prints, and I think I'm ready to say, this is a product that's worth buying. James Bricknell/CNET While EufyMake assures me the unit it sent me is the production model, the E1 is currently on a Kickstarter campaign and at the time of writing, has made $33 million with over two weeks to go. The packaging certainly suggests this unit is a full retail product. It was packed securely in a proper printed box, at any rate. EufyMake provided some blank products for me to print on, but I've also used a dozen or so unofficial materials to further my testing, including brass coins, Lego bricks, craft knives and even my own 3D printed models. The printer is relatively small. It's around 15 x 23 x 10 inches, so not much bigger than a laser printer if it were stood up on its front. You'll need about 32 inches of clearance to use it with the biggest plate it has, though. Like the Cricut, the E1's print area moves in and out of the machine as the print head moves left and right across the surface, so you need some clearance at the front and back. The mini flatbed is small and can be used with both doors open, but the standard bed will need them open. The other bed option is a rotary machine designed for tumblers and mugs, and, like the other beds, simply clicks into place. The printer recognizes the type of plate and adjusts your software to match. Both the large and small beds have replaceable mats that stick to them. Much like Cricut cutting mats, these are tacky, allowing you to hold down the product you're printing on securely. These are considered consumables, and while you do get several with your initial order, know that you will need to buy more of them as you continue to use the E1. Overspray is a big issue, so if you want to reduce the amount of mats you use, green or blue painter's tape will be your friend. James Bricknell/CNET Setup and installation were very quick and mostly done through the EufyMake app. This is the same app that you use for your AnkerMake/EufyMake 3D printers, which is nice. You can have all of your creative machines in one place. The app takes you through the initial setup, while the written instructions explain how to install the inks and cleaning solution. The ink installation is the simplest I have seen on these types of machines, with no manual bleeding or priming. All you need to do is make sure you put the correct cartridge in the correct slot. Simple. Each ink is 100ml, which is a good amount for the colors, though I would like to see a larger white cartridge available in the future, especially since it's the central ink used. To build the 3D image on your surface, the E1 uses the white ink to print in layers. It can print up to 5mm thick, and if you're printing something large like a canvas, that can use a lot of white. In my testing, a metal Displate-size print with 1.5mm of 3D effect took nearly 40 ml of white ink, 40% of the entire bottle. If you were planning to start a business, you would need a large supply of white ink. Currently, they cost around $44 a bottle, so you need to think about what you're going to make if you intend to turn a profit. The E1 UV printer can print on just about any hard surface. James Bricknell/CNET What is the E1 really for? Profit is really the main thrust of the E1, and why I can recommend you get one in specific circumstances. If you're not looking to use this as part of your existing small business or looking to start a small business off the back of this, you shouldn't get one. It's really fun to use and you'll have a blast using it, but the cost of the materials and the consumables makes it an expensive proposition if you aren't making something in return. EufyMake knows this and has said that the E1 is specifically aimed at the prosumer market. Over the course of printing over 100 products, I tried to take measurements based on what the software says it's using. I also measured the accuracy of the software by weighing the white ink in a full cartridge, which came out to 104ml, then printing a canvas art piece that my wife had drawn. The software said the E1 would use 6.89ml of white ink, and after it had finished, my new weigh-in showed it had used 6.6ml, a little less than it had told me. This wasn't a perfectly accurate test, but I'm much happier that the software estimated high, rather than low. Running out mid-print would definitely not be cool at $44 a bottle. The graph I made should give you an idea of the real-world applications of using the E1 in your business and how you might be able to leverage it. It's not a perfect representation. A lot of the products came from EufyMake, with no idea how much they will cost to order in bulk. Instead, I focused on how much white ink they would take to make, and therefore how many you could make per 100ml of white ink. In this way, you can at least see how much the ink will cost you. EufyMake E1 products per white ink Product type White use ml Gloss use ml Black use ml Cyan use ml Magenta use ml Yellow use ml Amount per white cartridge White ink cost per unit Jellyfoosh art canvas 6.89 5.23 0.01 0.01 0.02 0.01 15 $2.96 Portrait ceramic magnet 0.22 0 0.01 0.01 0.01 0.01 455 $0.09 Partial cover tumbler 0.45 0 0.01 0.01 0.03 0.03 222 $0.19 Full size metal plate with 1mm raised emboss 39.21 30.33 1.01 0.52 0.97 0.51 3 $16.86 Large wooden image 0 0 0.13 0.12 0.37 0.18 270 $0.16 5mm deep magnet 2.63 2.28 0.01 0.01 0.01 0.01 38 $1.13 Full cover iPhone case 0.17 0 0.06 0.07 0.07 0.07 588 $0.07 Balrog acrylic HQ W-CMYK 4.72 3.13 0.01 0.03 0.03 0.04 21 $2.03 Lego brick poster 0.21 0.01 0.01 0.01 0.01 0.01 476 $0.09 1mm thick hummingbird hat patch 0.13 0.09 0.01 0.01 0.01 0.01 769 $0.06 5mm flower on leather 0.79 0.68 0.01 0.01 0.01 0.01 127 $0.34 Itsboyinspace coaster 2mm depth 0.57 0.42 0.01 0.01 0.01 0.01 175 $0.25 Hung Jury magnet 3mm depth 0.8 0.69 0.01 0.01 0.01 0.01 125 $0.34 Challenge coin 1.5mm depth 0.38 0.29 0.01 0.01 0.01 0.01 263 $0.16 Carved challenge coin 0 depth 0.1 0.2 0.01 0.01 0.01 0.1 1,000 $0.04 Full color coaster 2.31 1.82 0.01 0.01 0.02 0.02 43 $0.99 Fidget spinner flat color cover 0.16 0 0.04 0.02 0.06 0.04 625 $0.07 3D model with overpaint x2 1.15 0 0.09 0.05 0.09 0.08 87 $0.49 Full coverage tumbler 3.37 0 0.06 0.13 0.2 0.05 30 $1.45 I was able to pull better data from products that I bought myself. Challenge coins are a big thing, and in my testing of the best laser engravers, I used them on the F1 Ultra laser, carving them using depth maps, so I had several left over. These cost $20 for 10, so I knew how much every part of the process would cost. Using some fairly basic math, I was able to figure out that you could print 131 double-sided challenge coins with one bottle of white ink -- the color use is only about 0.05ml per color -- so if you sold them for the average price of $20, your profit would be around $652. Now, that's not including your time, but for a basic cost calculation, you can see how this would be a great addition to your product lineup. Challenge coins are a big thing right now and a great way to make money James Bricknell/CNET It's not just challenge coins, either. Phone cases, magnets, coasters and more can be printed for a fairly low cost and sold for a decent return. The included software also offers the added bonus of easy customization, adding another avenue to increase profit. It would be easy to make a bunch of cool things to take to a farmer's market or a convention. You could even take the printer itself and make things on the fly, as it is fairly compact and easy to move around. In fact, EufyMake suggests you make at least one thing a day to keep the print heads moisturized and reduce the amount of print head cleaning and maintenance you'll need to do. Maintenance reduces costs Maintenance is another outlay you'll need to consider. The cleaning fluid, which is the same price as the ink, is designed to wash and maintain the print heads, but it can only do so many washes before you'll need to replace it. There are three different wash types, from a quick flash to a deep clean that can take 15 minutes. Deep cleans are for when one of your print heads seems not to be working, while the others can be used a little more regularly. It costs about the same as the ink to replace, around $44, or you can buy one of each ink, including white and gloss, and a cleaning fluid for around $300 a pack. The print head is also a consumable, though one with a longer lifespan than the inks James Bricknell/CNET It's important to note that the print head itself is also a consumable. Like hotends on a 3D printer or needles on a sewing machine, the part of the machine doing the work is subject to wear and tear. EufyMake covers the print head with a three-month warranty, and you can buy new ones for $600 each, but you should expect yours to last much longer with the right care. Like all complicated equipment, proper maintenance is key. Camera quality issues You'll also need to properly calibrate the machine after any major movement or maintenance cycle. If you replace the print mat, you should recalibrate the camera and do a print calibration. In fact, each mat has a cover designed to do just that before you get started. The camera will require a lot of calibrating and is my least favorite physical thing about the E1. It's really not that great. James Bricknell/CNET Because the camera is static and uses a wide-angle lens to capture the plate, it is almost impossible to get the image aligned correctly the first time. No matter how many times I adjusted the pattern I wanted to print on this coin, it simply wouldn't sit dead center. There isn't even a grid on the mats or on the software, which would be an enormous help. You could align the grids and get a good idea of where things are. And, because you can't align things perfectly, you end up with a lot of overspray that ruins the printing mat. Laser engravers have a simple solution to this issue that I wish EufyMake had thought of. They use a marking laser to highlight the outline of the thing you're trying to engrave. Once you have aligned it with the camera as best you can, you can use the marking laser to physically move the object into the correct position. The E1 also uses lasers, but they are for measuring distances for the Z-axis, so they wouldn't be able to be used for marking. I really hope they work on this issue moving forward, as this and the software are where the E1 falls down. Software always lags behind James Bricknell/CNET (Screenshot) AI is everywhere. We all know the perils and the pitfalls, and I have spoken at length on how it could be used to help less artistic people give birth to their imagination. The EufyMake studio software uses a lot of AI features to help you create a lot of the projects, but doesn't have the more basic granular features that it really needs to excel. The lack of a measured grid, for example, is a huge oversight and a feature that should have come before the ability to make your selfies look like cats. It also lacks a lot of basic editing tools that would make the experience better. A lot of editing can be done off the app through Photoshop, for example, but if you've used software like Glowforge's or xTool's studio software, you may be disappointed in what EufyMake brings to the table. Another example of this is the amount of white bleed when you choose the white-CMYK setting. This is designed to make the color more secure on the surface of the material, but you can see that on certain materials, it just looks bad. You should be able to adjust this on a per-design basis, but you can't. It's set in the software, and you can't change it, which could potentially cause problems with your prints. That's a running theme with the software. There are no settings at all that can be adjusted, not even a "preferences" section that's normally available in any software. James Bricknell/CNET That being said, the best part of the software is the AI used to make your images 3D. AI has a tendency to distort your image when it tries to change it, but EufyMake Studio does a good job at picking out the parts of the image that can be raised for it to make sense. I would like to have something a little more manual as well, though. I want to create a stained glass effect where the color is flat and the black lines are raised, but I can't select just the black lines. It's a feature that I hope to see added very soon. This kind of software is often made fast and scrappy, then refined over the years. This is still in the Kickstarter phase, but right now it's lacking. James Bricknell/CNET Most of the issues I have with the E1 are software or firmware-based. With some fine-tuning of the camera and some better editing choices in the EufyMake Studio, I think the E1 is a strong starting point for UV printing. I've had a lot of fun coming up with interesting and fun things to print, many of them unique and marketable. One of my favorite things is using the E1 to print movie posters or wallpaper onto Lego walls. The print can break apart with the bricks and would allow you to create customized wall art for people to add to their Lego collections. It really is the variety of potential designs and materials that makes the E1 worthy of your time. If you're already making products for a shop and your order count is in the hundreds, then the E1 shouldn't be your only UV printer. Invest in something larger that can help you with bulk orders. But as a supplement to your other work, it's going to be a great choice. If you're already 3D printing fun products, making cool Cricut designs or laser engraving, and you want to diversify your product catalogue, then the E1 is a creative way to do that on a tighter budget than a full-scale upgrade to a large UV printer. The Kickstarter campaign is nearly over, but there is still time to get involved.
CNET
10-06-2025
- Business
- CNET
After More Than 100 Unique Tests, I'm Ready to Recommend This UV Printer
James Bricknell/CNET As the resident printing expert here at CNET, I get a lot of interesting tech that comes through my testing lab. Most of the products fall into one of two creative camps: additive or subtractive. Additive products can be 3D printers like the Bambu Lab H2D that use plastic material or resin to build up a 3D model that becomes a fully 3D object in the world, or 2D printers that use ink to print on a flat medium. My best list contains paper printers, sublimation printers and apparel printers, all of which create different end results. Subtractive products like laser engravers remove material by cutting or burning to create either 3D or 2D images. UV printers are a hybrid of 3D and 2D printers. They use CMYK (Cyan, Magenta, Yellow and Black) inks and a white resin-style ink that is cured with a UV light to build up a shallow 3D image on a hard surface. Most of them are industrial and cost several thousand, if not tens of thousands, of dollars. EufyMake, formerly AnkerMake, has launched a Kickstarter for the E1, which it is calling the "world's first personal 3D-texture UV printer." I've spent several months testing it and printed over 100 different prints, and I think I'm ready to say, this is a product that's worth buying. James Bricknell/CNET While EufyMake assures me the unit it sent me is the production model, the E1 is currently on a Kickstarter campaign and at the time of writing, has made $33 million with over two weeks to go. The packaging certainly suggests this unit is a full retail product. It was packed securely in a proper printed box, at any rate. EufyMake provided some blank products for me to print on, but I've also used a dozen or so unofficial materials to further my testing, including brass coins, Lego bricks, craft knives and even my own 3D printed models. The printer is relatively small. It's around 15 x 23 x 10 inches, so not much bigger than a laser printer if it were stood up on its front. You'll need about 32 inches of clearance to use it with the biggest plate it has, though. Like the Cricut, the E1s print area moves in and out of the machine as the print head moves left and right across the surface, so you need some clearance at the front and back. The mini flatbed is small and can be used with both doors open, but the standard bed will need them open. The other bed option is a rotary machine designed for tumblers and mugs, and, like the other beds, simply clicks into place. The printer recognizes the type of plate and adjusts your software to match. Both the large and small beds have replaceable mats that stick to them. Much like Cricut cutting mats, these are tacky, allowing you to hold down the product you're printing on securely. These are considered consumables, and while you do get several with your initial order, know that you will need to buy more of them as you continue to use the E1. Overspray is a big issue, so if you want to reduce the amount of mats you use, green or blue painter's tape will be your friend. James Bricknell/CNET Setup and installation were very quick and mostly done through the EufyMake app. This is the same app that you use for your AnkerMake/EufyMake 3D printers, which is nice. You can have all of your creative machines in one place. The app takes you through the initial setup, while the written instructions explain how to install the inks and cleaning solution. The ink installation is the simplest I have seen on these types of machines, with no manual bleeding or priming. All you need to do is make sure you put the correct cartridge in the correct slot. Simple. Each ink is 100ml, which is a good amount for the colors, though I would like to see a larger white cartridge available in the future, especially since it's the central ink used. To build the 3D image on your surface, the E1 uses the white ink to print in layers. It can print up to 5mm thick, and if you're printing something large like a canvas, that can use a lot of white. In my testing, a metal Displate-size print with 1.5mm of 3D effect took nearly 40 ml of white ink, 40% of the entire bottle. If you were planning to start a business, you would need a large supply of white ink. Currently, they cost around $44 a bottle, so you need to think about what you're going to make if you intend to turn a profit. The E1 UV printer can print on just about any hard surface. James Bricknell/CNET What is the E1 really for? Profit is really the main thrust of the E1, and why I can recommend you get one in specific circumstances. If you're not looking to use this as part of your existing small business or looking to start a small business off the back of this, you shouldn't get one. It's really fun to use and you'll have a blast using it, but the cost of the materials and the consumables makes it an expensive proposition if you aren't making something in return. EufyMake knows this and has said that the E1 is specifically aimed at the prosumer market. Over the course of printing over 100 products, I tried to take measurements based on what the software says it's using. I also measured the accuracy of the software by weighing the white ink in a full cartridge, which came out to 104ml, then printing a canvas art piece that my wife had drawn. The software said the E1 would use 6.89ml of white ink, and after it had finished, my new weigh-in showed it had used 6.6ml, a little less than it had told me. This wasn't a perfectly accurate test, but I'm much happier that the software estimated high, rather than low. Running out mid-print would definitely not be cool at $44 a bottle. The graph I made should give you an idea of the real-world applications of using the E1 in your business and how you might be able to leverage it. It's not a perfect representation. A lot of the products came from EufyMake, with no idea how much they will cost to order in bulk. Instead, I focused on how much white ink they would take to make, and therefore how many you could make per 100ml of white ink. In this way, you can at least see how much the ink will cost you. EufyMake E1 products per white ink Product type White use ml Gloss use ml Black use ml Cyan use ml Magenta use ml Yellow use ml Amount per white cartridge White ink cost per unit Jellyfoosh art canvas 6.89 5.23 0.01 0.01 0.02 0.01 15 $2.96 Portrait ceramic magnet 0.22 0 0.01 0.01 0.01 0.01 455 $0.09 Partial cover tumbler 0.45 0 0.01 0.01 0.03 0.03 222 $0.19 Full size metal plate with 1mm raised emboss 39.21 30.33 1.01 0.52 0.97 0.51 3 $16.86 Large wooden image 0 0 0.13 0.12 0.37 0.18 270 $0.16 5mm deep magnet 2.63 2.28 0.01 0.01 0.01 0.01 38 $1.13 Full cover iPhone case 0.17 0 0.06 0.07 0.07 0.07 588 $0.07 Balrog acrylic HQ W-CMYK 4.72 3.13 0.01 0.03 0.03 0.04 21 $2.03 Lego brick poster 0.21 0.01 0.01 0.01 0.01 0.01 476 $0.09 1mm thick hummingbird hat patch 0.13 0.09 0.01 0.01 0.01 0.01 769 $0.06 5mm flower on leather 0.79 0.68 0.01 0.01 0.01 0.01 127 $0.34 Itsboyinspace coaster 2mm depth 0.57 0.42 0.01 0.01 0.01 0.01 175 $0.25 Hung Jury magnet 3mm depth 0.8 0.69 0.01 0.01 0.01 0.01 125 $0.34 Challenge coin 1.5mm depth 0.38 0.29 0.01 0.01 0.01 0.01 263 $0.16 Carved challenge coin 0 depth 0.1 0.2 0.01 0.01 0.01 0.1 1,000 $0.04 Full color coaster 2.31 1.82 0.01 0.01 0.02 0.02 43 $0.99 Fidget spinner flat color cover 0.16 0 0.04 0.02 0.06 0.04 625 $0.07 3D model with overpaint x2 1.15 0 0.09 0.05 0.09 0.08 87 $0.49 Full coverage tumbler 3.37 0 0.06 0.13 0.2 0.05 30 $1.45 I was able to pull better data from products that I bought myself. Challenge coins are a big thing, and in my testing of the , I used them on the F1 Ultra laser, carving them using depth maps, so I had several left over. These cost $20 for 10, so I knew how much every part of the process would cost. Using some fairly basic math, I was able to figure out that you could print 131 double-sided challenge coins with one bottle of white ink -- the color use is only about 0.05ml per color -- so if you sold them for the average price of $20, your profit would be around $652. Now, that's not including your time, but for a basic cost calculation, you can see how this would be a great addition to your product lineup. Challenge coins are a big thing right now and a great way to make money James Bricknell/CNET It's not just challenge coins, either. Phone cases, magnets, coasters and more can be printed for a fairly low cost and sold for a decent return. The included software also offers the added bonus of easy customization, adding another avenue to increase profit. It would be easy to make a bunch of cool things to take to a farmer's market or a convention. You could even take the printer itself and make things on the fly, as it is fairly compact and easy to move around. In fact, EufyMake suggests you make at least one thing a day to keep the print heads moisturized and reduce the amount of print head cleaning and maintenance you'll need to do. Maintenance reduces costs Maintenance is another outlay you'll need to consider. The cleaning fluid, which is the same price as the ink, is designed to wash and maintain the print heads, but it can only do so many washes before you'll need to replace it. There are three different wash types, from a quick flash to a deep clean that can take 15 minutes. Deep cleans are for when one of your print heads seems not to be working, while the others can be used a little more regularly. It costs about the same as the ink to replace, around $44, or you can buy one of each ink, including white and gloss, and a cleaning fluid for around $300 a pack. The print head is also a consumable, though one with a longer lifespan than the inks James Bricknell/CNET It's important to note that the print head itself is also a consumable. Like hotends on a 3D printer or needles on a sewing machine, the part of the machine doing the work is subject to wear and tear. EufyMake covers the print head with a three-month warranty, and you can buy new ones for $600 each, but you should expect yours to last much longer with the right care. Like all complicated equipment, proper maintenance is key. Camera quality issues You'll also need to properly calibrate the machine after any major movement or maintenance cycle. If you replace the print mat, you should recalibrate the camera and do a print calibration. In fact, each mat has a cover designed to do just that before you get started. The camera will require a lot of calibrating and is my least favorite physical thing about the E1. It's really not that great. James Bricknell/CNET Because the camera is static and uses a wide-angle lens to capture the plate, it is almost impossible to get the image aligned correctly the first time. No matter how many times I adjusted the pattern I wanted to print on this coin, it simply wouldn't sit dead center. There isn't even a grid on the mats or on the software, which would be an enormous help. You could align the grids and get a good idea of where things are. And, because you can't align things perfectly, you end up with a lot of overspray that ruins the printing mat. Laser engravers have a simple solution to this issue that I wish EufyMake had thought of. They use a marking laser to highlight the outline of the thing you're trying to engrave. Once you have aligned it with the camera as best you can, you can use the marking laser to physically move the object into the correct position. The E1 also uses lasers, but they are for measuring distances for the Z-axis, so they wouldn't be able to be used for marking. I really hope they work on this issue moving forward as it, and the software are where the E1 fall down. Software always lags behind James Bricknell/CNET (Screenshot) AI is everywhere. We all know the perils and the pitfalls, and I have spoken at length on how it could be used to help less artistic people give birth to their imagination. The EufyMake studio software uses a lot of AI features to help you create a lot of the projects, but doesn't have the more basic granular features that it really needs to excel. The lack of a measured grid, for example, is a huge oversight and a feature that should have come before the ability to make your selfies look like cats. It also lacks a lot of basic editing tools that would make the experience better. A lot of editing can be done off the app through Photoshop, for example, but if you've used software like Glowforge's or xTool's studio software, you may be disappointed in what EufyMake brings to the table. Another example of this is the amount of white bleed when you choose the white-CMYK setting. This is designed to make the color more secure on the surface of the material, but you can see that on certain materials, it just looks bad. You should be able to adjust this on a per-design basis, but you can't. It's set in the software, and you can't change it, which could potentially cause problems with your prints. That's a running theme with the software. There are no settings at all that can be adjusted, not even a "preferences" section that's normally available in any software. James Bricknell/CNET That being said, the best part of the software is the AI used to make your images 3D. AI has a tendency to distort your image when it tries to change it, but EufyMake Studio does a good job at picking out the parts of the image that can be raised for it to make sense. I would like to have something a little more manual as well, though. I want to create a stained glass effect where the color is flat and the black lines are raised, but I can't select just the black lines. It's a feature that I hope to see added very soon. This kind of software is often made fast and scrappy, then refined over the years. This is still in the Kickstarter phase, but right now it's lacking. James Bricknell/CNET Most of the issues I have with the E1 are software or firmware-based. With some fine-tuning of the camera and some better editing choices in the EufyMake Studio, I think the E1 is a strong starting point for UV printing. I've had a lot of fun coming up with interesting and fun things to print, many of them unique and marketable. One of my favorite things is using the E1 to print movie posters or wallpaper onto Lego walls. The print can break apart with the bricks and would allow you to create customized wall art for people to add to their Lego collections. It really is the variety of potential designs and materials that makes the E1 worthy of your time. If you're already making products for a shop and your order count is in the hundreds, then the E1 shouldn't be your only UV printer. Invest in something larger that can help you with bulk orders. But as a supplement to your other work, it's going to be a great choice. If you're already 3D printing fun products, making cool Cricut designs or laser engraving, and you want to diversify your product catalogue, then the E1 is a creative way to do that on a tighter budget than a full-scale upgrade to a large UV printer. The Kickstarter campaign is nearly over, but there is still time to get involved.
Geeky Gadgets
14-05-2025
- Business
- Geeky Gadgets
EufyMake UV Printer : The Real Costs of the Printing & Ownership Explained
What if the sleek, innovative EufyMake UV printer isn't quite the bargain it seems? With its ability to print vibrant, durable designs on materials like wood, metal, and ceramics, it's easy to see why this Kickstarter-backed device has caught the attention of creators and professionals alike. Its UV curing technology, which instantly dries prints, promises efficiency and precision. But behind the allure of innovation lies a more complex reality: the true cost of ownership. From proprietary ink systems to ongoing maintenance and optional software subscriptions, this printer may demand more from your wallet than its upfront price tag suggests. In this piece, the Make or Break Shop go through the hidden expenses and practical considerations that come with investing in the EufyMake UV printer. You'll learn about the long-term costs tied to its ink cartridges, the limitations of its design capabilities, and the potential trade-offs between convenience and versatility. Whether you're a hobbyist looking to elevate your creative projects or a business owner seeking reliable industrial-grade printing, understanding these factors is crucial. The question isn't just whether the EufyMake can deliver on its promises—but whether it's worth the price you'll pay to get there. EufyMake UV Printer Overview Key Features and Versatility of the EufyMake The EufyMake UV printer stands out for its ability to print on a wide range of flat surfaces, using UV light to cure ink instantly. This ensures that prints are dry and ready for use immediately after completion. The printer supports materials such as Wood, Metal, Ceramics and Stickers. This versatility makes it suitable for various applications, from personalized creative projects to industrial tasks. Additionally, the printer can handle tapered objects, offering some flexibility in design. However, it struggles with surfaces that feature abrupt dimensional changes, limiting its use for more complex shapes. Another limitation is the rigidity of its UV-cured ink, which makes it unsuitable for fabrics or materials requiring flexibility. Despite these constraints, the printer's ability to produce durable and vibrant prints on flat surfaces remains a significant advantage. Proprietary Ink System: A Long-Term Expense One of the most notable ongoing costs associated with the EufyMake printer is its proprietary ink system. A full set of seven cartridges—cyan, yellow, magenta, black, gloss, and two white—costs approximately $300. The cost per print varies depending on the size and complexity of the design, ranging from as little as $0.01 for small, simple prints to over $1.20 for larger, multi-layered projects. The proprietary nature of the ink system means that third-party alternatives are not available, locking users into higher long-term expenses. For budget-conscious buyers, this could be a significant drawback. While the quality of the proprietary ink is undeniable, the lack of cost-effective alternatives may deter some potential users. Real EufyMake UV Printer Costs Explained Watch this video on YouTube. Below are more guides on the printer from our extensive range of articles. Maintenance and Operational Costs The EufyMake printer includes an automatic cleaning system, which reduces the need for manual maintenance. Cleaning cartridges, designed to last for up to 10 deep cleaning cycles, represent an additional expense. Regular cleaning is essential to maintain print quality and prevent clogging, especially for users who rely on the printer for frequent or high-volume tasks. For occasional users, the printer's ability to remain in standby mode for up to six months without requiring maintenance is a convenient feature. However, even with this capability, periodic cleaning cycles are necessary to ensure optimal performance. These maintenance requirements, while manageable, contribute to the overall cost of ownership and should be factored into any purchasing decision. Software Features and Subscription Options The EufyMake printer's software is equipped with AI-based tools for texture generation and image processing, enhancing its design capabilities. It also supports Wi-Fi connectivity and is compatible with both Mac and Windows operating systems, offering flexibility for a wide range of users. While the core software features are free, the company offers optional subscription tiers that provide additional benefits, such as: Enhanced AI credits for advanced design tools Cloud storage for project files These subscriptions cater to users who require advanced functionality, but they introduce another layer of cost. For those who only need basic features, the free version of the software may suffice. However, professionals or businesses seeking to maximize the printer's capabilities may find the subscription options necessary, further increasing the total cost of ownership. Durability and Practical Considerations The durability of prints produced by the EufyMake printer is both a strength and a limitation. The UV-cured ink ensures that designs are long-lasting and resistant to wear. However, these prints are not dishwasher-safe, meaning items like mugs or plates must be handwashed. This limitation may be inconvenient for users who prioritize ease of maintenance for printed items. Additionally, while the printer can accommodate tapered objects, it cannot handle surfaces with sudden dimensional changes. This restricts its versatility for certain applications, particularly in more complex or unconventional projects. Despite these limitations, the printer's ability to produce high-quality, durable prints on flat surfaces remains a key selling point. Warranty and Long-Term Support The EufyMake printer comes with a three-month warranty for the print head, with an optional 12-month extended warranty available for purchase. While this provides some reassurance, concerns about long-term support persist. The company's track record with previous products raises questions about the availability of replacement parts and the reliability of customer service. For users planning to rely on the printer for professional or high-volume use, these factors should be carefully considered. A lack of consistent support or readily available parts could lead to downtime or additional expenses in the future. Kickstarter Pricing and Future Potential As a Kickstarter-backed product, the EufyMake printer offers early adopters the opportunity to secure pricing that is unaffected by potential tariffs or future price increases. This makes it an attractive option for those willing to invest early. The company has also hinted at potential future updates, such as a roll printing feature for stickers, which could expand the printer's capabilities. Early backers may gain access to these updates at no additional cost, adding value to their investment. However, as with any crowdfunding project, there is an inherent level of risk, and buyers should weigh the benefits of early adoption against the uncertainties of future developments. Final Considerations The EufyMake UI E1 UV printer offers advanced features such as UV curing, AI-based design tools, and compatibility with a variety of materials. Its ability to produce high-quality prints on flat surfaces makes it a valuable tool for creative and industrial applications. However, the proprietary ink system, maintenance requirements, and optional subscription costs significantly contribute to its long-term expense. For early adopters, the Kickstarter pricing and potential future updates may provide added value. However, prospective buyers should carefully evaluate the printer's limitations, ongoing costs, and the company's track record for support before making a commitment. The EufyMake printer holds great potential for those prepared to invest in its capabilities, but it is essential to approach this purchase with a clear understanding of the associated expenses and practical constraints. Media Credit: Make or Break Shop Filed Under: Guides, Hardware, Reviews Latest Geeky Gadgets Deals Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.
