Latest news with #technologicaladvancements
Mail & Guardian
21-07-2025
- Health
- Mail & Guardian
Traces of ARVs in drinking water ‘harmless' but can affect health over time
Wastewater treatment processes cannot remove the bioactive compounds, underlining the need for technological advancements. Photo: Delwyn Verasamy The presence of Last week, the Mail & Guardian Current wastewater treatment processes are inadequate for removing these bioactive compounds, underlining the need for technological advancements, the authors said. The drugs most frequently detected were Aquatic ecosystems and wastewater management systems were affected. Freshwater snails exposed to ARVs exhibited altered embryonic development, while bacteriophages — viruses critical to controlling bacteria in wastewater treatment — were significantly affected. Such disruptions could lead to bacterial blooms and reduced water quality, the authors said. 'The consumption of any type of exogenous drug by any organism in sufficient quantities may intervene with the regulation of metabolic systems and bring about adverse effects,' said the study, warning that the presence of antiretrovirals in water 'can be considered a hidden or latent risk'. 'Humans are also exposed to these compounds via drinking water, and at concentrations exceeding calculated hazard quotients,' the authors said. 'Although not found in this study, humans and other organisms may potentially ingest antiretrovirals and their breakdown products via aquatic organisms such as fish.' Concentrations of ARVs in some water sources exceeded acceptable thresholds, posing potential long-term health risks to people. Nearly all antiretrovirals were found in natural systems and some in drinking water, although none were found in the fish tissue samples, nor were antiretroviral metabolites found. Since early 2000, the WRC, along with local and international partner research organisations, has commissioned several studies on the presence of Its research has focused on CECs such as microplastics, chemicals, and One of the studies related to ARVs was undertaken by the University of North West. 'As reported in the media, the study found traces of ARVs in water samples taken from rivers and potable water sources, the joint statement said. 'This can be attributed to the pharmacological process where the active part of the medication is absorbed by the body, leaving the residual to be discharged from the body, subsequently finding its way into the sewage system. These traces of ARVs can then also be present in water that has been extracted from the rivers by municipalities to be treated and supplied as potable water.' Globally, CECs are increasingly recognised as a concern for water quality, especially in wastewater and reclaimed wastewater for potable reuse, as well as agricultural water uses. 'However, CECs are a relatively new area of research globally, particularly relating to the causes and effects of CEC, the human health risks, treatment methods to remove CECs, and potential regulatory measures that can be taken to address the problem.' The WRC research has focused on increasing understanding of the sources, pathways, and potential effects of CECs on water resources. The South African National Standard 'The traces of pharmaceuticals, microplastics and other such CECs that have been found in water resources in South Africa are very small quantities, measured in nanograms (one billionth of a gram). Conventional water and wastewater treatment technologies are designed to remove much larger contaminants such as particles of faeces and bacteria.' Higher concentrations of traces of ARVs were found downstream of wastewater treatment plants, which means that the municipal wastewater treatment works are not removing them, 'because most existing wastewater treatment works have not been designed to remove CECs. 'Low concentrations of ARVs were found in some of the The WRC and the department said that there is limited knowledge of environmental toxicity, potential adverse effects on ecosystems and viral resistance of these compounds. 'CECs in water is a growing global problem and area of attention around the world. 'Globally, the level of CEC compounds in water is generally not yet regulated. This is partly due to their presence often being below water quality detection limits. However, due to their continuous production, lack of appropriate disposal, constant input into the environment and presence in water resources, albeit in small concentrations, there is now increasing global research into the issue.' Rand Water said it has been monitoring ARVs since 2015. 'Rand Water, like other research institutions, detected ARVs in the natural waters located downstream of wastewater treatment plants.' The bulk water services provider abstracts water from the Vaal Dam, which is located upstream of these wastewater treatment plants. 'Rand Water has not detected ARVs at the point of abstraction in the Vaal Dam and concomitantly in any of its treated final drinking water.' 'Rand Water assures the public that drinking water remains safe for human consumption. Rand Water, as the remains committed to protecting the health of consumers by providing potable water that complies with SANS241 standards and safe for human consumption.' For the study, North-West University sampled water upstream and downstream of wastewater treatment plants — specifically Sunderland Ridge, Vlakplaats, Waterval, Olifantsfontein River, Welgedacht, Zeekoegat, Flip Human and Baragwanath — in northern and southern Gauteng. Sampling sites included the The most frequently detected compound was fluconazole (28 detections from 72 samples), with concentrations ranging from 0.06 to 1.8 μg/L (micrograms per litre). Nevirapine and efavirenz were the second-most detected compounds, both with 22 out of 72 samples. On average, lopinavir and efavirenz had the highest concentrations of the compounds analysed. Didanosine and zidovudine were the least detected compounds — two and six out of 72.
Yahoo
18-07-2025
- Business
- Yahoo
Amazon.com (AMZN) Leverages AWS for Generative AI Growth in Healthcare and Retail
experienced a remarkable price increase of nearly 30% last quarter, supported by recent collaborations and technological advancements. Key events include the strategic collaboration between Basis and Amazon Web Services (AWS) to enhance generative AI technologies, and the addition of Amazon to various Russell Value Benchmark indices, signaling strong market credibility. These developments, alongside robust corporate earnings, provided a favorable context within a market that remained generally optimistic amid record-high indices and strong economic data. These factors helped Amazon maintain its upward trajectory in line with market dynamics, contributing to the company's substantial price movement. Buy, Hold or Sell View our complete analysis and fair value estimate and you decide. Find companies with promising cash flow potential yet trading below their fair value. The recent collaboration between Basis and Amazon Web Services (AWS) in generative AI and Amazon's addition to the Russell Value Benchmark indices could have significant implications for Amazon's operational narrative. These developments might further enhance AWS's capabilities, possibly accelerating revenue growth in Amazon's cloud service segment. The inclusion in benchmark indices might bolster investor confidence, potentially driving shareholder value. Over the past three years, Amazon's total return, including dividends, appreciated by 79.64%. This lends context to the potential impact of recent corporate maneuvers on Amazon's financial trajectory. Over the past year, Amazon exceeded the US Market, which returned 14.1%, and matched the US Multiline Retail industry return of 22%. This relative performance could reflect investor endorsement of Amazon's strategic efforts and market positioning. The current share price of US$223.88 sits below the consensus price target of US$246.71, indicating a potential space for growth in alignment with forecasted earnings improvements. Analysts expect earnings growth, aided by supply chain efficiencies and AWS advancements, although the exact impact of new deals and technological progress on future revenue and earnings forecasts remains contingent on broader economic conditions and market demands. Review our growth performance report to gain insights into future. This article by Simply Wall St is general in nature. We provide commentary based on historical data and analyst forecasts only using an unbiased methodology and our articles are not intended to be financial advice. It does not constitute a recommendation to buy or sell any stock, and does not take account of your objectives, or your financial situation. We aim to bring you long-term focused analysis driven by fundamental data. Note that our analysis may not factor in the latest price-sensitive company announcements or qualitative material. Simply Wall St has no position in any stocks mentioned. Companies discussed in this article include AMZN. This article was originally published by Simply Wall St. Have feedback on this article? Concerned about the content? with us directly. Alternatively, email editorial-team@ Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Yahoo
16-07-2025
- Business
- Yahoo
Smart Casing Running Tools Market Size expected to reach US$2.67 billion by 2031, CAGR of 6.8%
NEW YORK, July 16, 2025 /PRNewswire/ -- According to a new comprehensive report from The Insight Partners, the global smart casing running Tools market is observing significant growth owing to the technological advancements and digitalization and automation in oilfields. The smart casing running Tools market size was valued at US$1.70 billion in 2024 and is expected to reach US$2.67 billion by 2031; it is estimated to record a CAGR of 6.8% from 2025 to 2031. The report runs an in-depth analysis of market trends, key players, and future opportunities. In general, the smart casing running Tools market comprises a vast array of hardware, sensor kit type, software, sales, application, and technology, which are expected to register strength during the coming years. To explore the valuable insights in the Smart Casing Running Tools Market report, you can easily download a sample PDF of the report - Overview of Report Findings Technological Advancements: As oil and gas operations continue to prioritize safety, efficiency, and cost reduction, there is a growing demand for advanced Tools that can deliver these outcomes through automation and digital integration. smartCRT from McCoy Global Inc. stands out as a next-generation, electronically integrated solution that redefines casing operations by combining hydraulic precision with wireless control and real-time digital feedback. With its modular and hydraulically operated design, smartCRT enables seamless execution of critical operations, such as casing make-up, rotation, reciprocation, circulation, and casing while drilling (CwD), all with a level of consistency and repeatability that manual systems cannot match. Integrating features such as wireless drillers' display control, link tilt systems, dynamic bails, and optional remote belly packs enhance operational visibility and control and improve rig floor safety by reducing manual handling and exposure to hazardous tasks. These technological advancements significantly reduce non productive time (NPT) by enabling quicker setups, minimizing mechanical failures, and allowing real-time operational adjustments. Furthermore, smartCRT's low maintenance requirements, user-friendly interface, and adaptability across various well types make it a cost-effective solution for operators seeking to optimize both performance and expenditure. As the industry moves toward more digitally enabled, automated, and remotely operable drilling environments, Tools such as the smartCRT position themselves as essential components of the modern rig Toolskit. This shift is expected to create a substantial growth opportunity for manufacturers and service providers in the smart casing running Tools market, driven by the increasing adoption of high-performance smart casing technologies across global oilfields. For Detailed Smart Casing Running Tools Market Insights, Visit: Regional Overview: The North American oil and gas industry is experiencing a steady transformation, with increasing emphasis on automation, safety, and efficiency in drilling and completion operations. Within oil and gas, energy industry, smart casing running Tools are gaining traction, driven by a combination of technological, economic, and regulatory factors. Smart casing running Tools, which integrate automation, remote monitoring, and real-time data capabilities into traditional casing handling equipment, are becoming essential assets in modern rig operations. Furthermore, North America continues to lead global oil and gas production, largely due to its effective utilization of unconventional resources such as shale oil and gas. Places such as the Permian Basin (Texas and New Mexico), Eagle Ford (South Texas), and Bakken (North Dakota and Montana) are characterized by complex horizontal and extended-reach wells, which present unique technical challenges. As operators drill deeper and farther laterally to maximize reservoir contact, the complexity of casing running operations has increased significantly, fueling the demand for advanced, intelligent downhole Tools. Furthermore, key E&P companies are focusing on oil production across various regions of the North American continent. For instance, in April 2025, Chevron Corporation announced that it started oil and natural gas production from the Ballymore subsea tieback in the deep-water Gulf of America. Ballymore, the latest in a series of Chevron projects to start up in the past year, represents another step toward the company's goal to produce 300,000 net barrels per day of oil equivalent from the Gulf in 2026. Ballymore is expected to produce up to 75,000 gross barrels of oil per day through three wells tied back three miles to the existing Chevron-operated Blind Faith facility. As E&P companies continue to pursue higher performance and lower risk, smart casing running Tools are positioned as strategic assets that enhance execution efficiency while supporting digital transformation and ESG objectives. This trend is expected to accelerate as Tools become more affordable, interoperable, and intelligent. Stay Updated on The Latest Smart Casing Running Tools Market Trends: Geographical Insights: North America dominated the smart casing running Tools market in 2024. Middle East and Africa is the second-largest contributor to the global smart casing running Tools market, followed by Asia Pacific. Market Segmentation The hardware segment is divided into remote display, sensor kit, head assembly, gripping assembly, circulator assembly, power supply, and other accessories. The sensor kit segment is subsegmented into torque and tension sensor, position sensor, data transmission sensor, and others. The software segment is bifurcated into inbuilt and optional. The sales segment is bifurcated into direct sales and aftermarket. The application segment is divided into onshore, offshore, and others. The technology segment is categorized into fully automated CRTs, remotely operated CRTs, and hybrid CRTs. Purchase Premium Copy of Global Smart Casing Running Tools Market Size and Growth Report (2025-2031) at: Competitive Strategy and Development - Key Players: A few major companies operating in the smart casing running Tools market include McCoy Global Inc.; NOV Inc.; Expro Group Holdings NV; Nabors Industries Ltd; Volant Products; Weatherford International Plc; Odfjell Technology Ltd; Parker Drilling Company; Premiere, Inc.; and Magnum Manufacturing. - Trending Topics: AI-Driven Predictive Maintenance, Integration of Internet of Things (IoT) and Digital Twins, Sustainability and Green Manufacturing, and more. Global Headlines - "McCoy Global Inc. ("McCoy," "McCoy Global" or "the Corporation") (TSX: MCB) announced the successful commercialization of its innovative smarTR™ technology. The smarTR™ system, designed to enhance wellbore integrity, significantly improve personnel safety, and optimize tubular running operations, has exceeded customer expectations. Confidence in the technology from its US field-trial partners, including a leading US tubular running service (TRS) provider, resulted in $11.0 million of contract awards for smarTR hardware. In addition to the equipment award, the contract includes utilization-based SaaS revenue for the system's remote integration and automated operational capabilities." - "Expro acquired Coretrax, a technology leader in performance drilling Tools and wellbore cleanup, from Buckthorn Partners. The acquisition will expand Expro's portfolio of cost-effective, technology-enabled Well Construction and Well Intervention, and integrity solutions." For More Latest Electronics and Semiconductor Research Reports - Conclusion The smart casing running Tools (Smart CRT) marks a major improvement over conventional casing running Tools (CRT) by incorporating electronic systems and data collection technologies, enhancing safety, efficiency, and overall operational performance in drilling activities. Factors such as the increased drilling activity and digitalization and automation in oilfields are driving the smart casing running Tools market. The smart casing running Tools market is anticipated to grow during the forecast period, owing to the reduction in non-productive time (NPT) and technological advancements in smart casing running Tools. The integration with cloud and edge computing is likely to be a key trend in the smart casing running Tools market. However, high initial investment may hamper the smart casing running Tools market growth. The report from The Insight Partners, therefore, provides several stakeholders— raw material suppliers, original equipment manufacturers (OEMs), technology providers and digital solution vendors, and end users (oil and gas operators) —with valuable insights into how to successfully navigate this evolving market landscape and unlock new opportunities. Trending Related Reports: The Sensor Testing Market Size is expected to register a CAGR of 5.9% from 2025 to 2031AI Sensors Market Size is expected to register a CAGR of 40.8% from 2025 to 2031The Acoustic Wave Sensor Market Size is expected to register a CAGR of 8.9% from 2025 to 2031The Wireless Sensors Market Size is expected to register a CAGR of 12.36% from 2025 to 2031Video as a sensor Market Share is expected to register a CAGR of 7.9% from 2025 to 2031The Touch Sensor Market Share is expected to register a CAGR of 14.2% from 2025 to 2031The Quantum Sensors Market Share is expected to register a CAGR of 17.1% from 2025 to 2031The smart meter market size is expected to reach US$49.24 billion by 2031The Smart Digital Education Market Share is expected to register a CAGR of 15.2% from 2025 to 2031 About Us: The Insight Partners is a one stop industry research provider of actionable intelligence. We help our clients in getting solutions to their research requirements through our syndicated and consulting research services. We specialize in industries such as Semiconductor and Electronics, Aerospace and Defense, Automotive and Transportation, Biotechnology, Healthcare IT, Manufacturing and Construction, Medical Device, Technology, Media and Telecommunications, Chemicals and Materials. Contact Us:If you have any queries about this report or if you would like further information, please contact us:Contact Person: Ankit MathurE-mail: +1-646-491-9876 Press Release - Logo - View original content to download multimedia: SOURCE The Insight Partners Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data
Fast Company
14-07-2025
- Business
- Fast Company
How to lead in the new world of work
We're in an era of hyperinnovation, full of rapid technological advancements in artificial intelligence and beyond. This environment is creating a new world of work, one that offers both opportunities and challenges. What are business leaders to do in such exciting, volatile times? That was the focus of Fast Company's recent New World of Work Summit in partnership with HP, which included a panel discussion on how to lead in this new era, featuring experts from different fields. Here are three takeaways from their conversation. (Some comments have been edited for length and clarity; scroll to the bottom to watch the entire panel discussion.) 1. Two factors are shaping this new world: hybrid work and AI. Hybrid work is here to stay, despite return-to-office mandates over the past few years, said Dave Shull, president, HP Solutions. He cited research from digital collaboration firm Vyopta showing that the number of virtual meetings has not declined, even as in-person meetings more than doubled as people returned to the office. 'We thought hybrid was going to go away, and it hasn't,' Shull said. 'That's a reality and a real challenge that I think we as companies need to address.' Meanwhile, AI is also changing the face of work in multiple ways. For one, it can help people work cross-functionally and better understand other roles within the business, said Tobias Chen, CEO of Volumetric Camera Systems, which creates immersive video content for film, TV, and other media. He provided an example from the visual effects industry, in which technical backend workers historically had very separate tasks from artists—yet both sides are needed to make projects come to life. 'Now with AI tools, if you're in a technical role, you can use AI to pre-visualize what those creative graphics could look like,' Chen said. 'And those in a creative role can use AI to do those technical steps for you. That cross-pollination helps the whole organization better understand what everyone's doing.' AI also enables team members to experiment and iterate with concepts before deciding on the best solution. This iterative process allowed Volumetrics to create a project for The Sphere, an immersive entertainment arena in Las Vegas, in just one month—a deadline that, Chen said, would have been 'impossible' otherwise. 'Through AI, we're able to create a lot of concepts and different ideas, then test them out really quickly and iteratively before locking in something and going through the final process.' 'It's the intersection of those two points—hybrid work and AI—that defines the new world of work,' Shull added. 'And the challenge for all of us is to figure out how to solve for our employees.' 2. Tools must foster connection to fuel productivity. The panelists discussed the tension between engagement and productivity, with some noting that too many tools with too little guidance can undercut the employee experience. If employees do not feel engaged, their productivity will plummet. Shull noted that technology is now so baked into the employee experience, that the IT function is as critical as the HR function. 'IT working hand-in-hand with HR will allow companies to work through AI and hybrid in a very different way,' he said. 'IT is key to the employee experience: Are we taking care of that employee experience as the primary metric? And how are we making sure our employees are as impactful as possible, whether they're at home or in the office?' As a result, the chief information officer and chief people officer roles are converging, Shull said. He recommended close collaboration between these two leaders and functions, including joint projects like an 'early warning system' that flags the beginnings of waning employee engagement. 'There's going to have to be a reinvention of IT,' Shull said. 'It's being charged in a strategic way like never before: 'Take AI and transform the company.' It is now a driving force for growth.' 3. Leaders must trust team members to choose the best way to execute their tasks. Brian Elliott, the CEO at Work Forward, an advisory group dedicated to helping leaders build better ways of working through data, said the rapid pace of change and emergence of new tools is causing many executives to fall back on 'command and control.' Rather than putting more policies in place in order to figure things out, he said they should be asking, 'How do I align people around purpose, because that's what's going to [engage] them.' Elliott's advice is twofold. First, leaders must get their own hands on AI and other new tools if they expect their team members to adopt them. Too often, he pointed out, this isn't the case. When employees see that their leaders are learning and adapting alongside the rest of the team, it inherently builds trust. Second, Elliott recommends that leaders ensure they remain focused on business outcomes. Rather than dictate use of a certain tool or process, present it as one tool of an entire arsenal that team members can use to achieve that outcome. Trusting them to execute will engender trust in you as a leader. 'Give them a little bit of latitude instead of command and control,' he said. 'Say, 'Look, these are the big audacious goals we've got, but I want you to figure out how we're going to get there. That's why I've hired you.' ' Watch the full panel:
Globe and Mail
28-05-2025
- Automotive
- Globe and Mail
Automotive Door Handles Market is Expected to Reach USD 7.01 Billion by 2033
The automotive door handles market is expected to reach USD 7.01 billion by 2033, exhibiting a CAGR of 4.20% during 2025-2033. The market has been categorized based on type, handle type, vehicle type, and sales channel. IMARC Group, a leading market research company, has recently releases report titled 'Automotive Door Handles Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2025-2033, ' The study provides a detailed analysis of the industry, including the global automotive door handles market size, share, growth, trends and forecast. The report also includes competitor and regional analysis and highlights the latest advancements in the market. Report Highlights: How big is the automotive door handles market? The global automotive door handles market size was valued at USD 4.84 Billion in 2024. Looking forward, IMARC Group estimates the market to reach USD 7.01 Billion by 2033, exhibiting a CAGR of 4.20% during 2025-2033. Factors Affecting the Growth of the Automotive Door Handles Industry: Technological Advancements: The automotive door handles market is significantly influenced by technological advancements that introduce electronic and smart door handles, enhancing vehicle security and user convenience. Features such as keyless entry, touch-sensitive operations, and biometric recognition are becoming increasingly popular. Innovations in material science have also led to the development of lightweight and durable materials for door handles, contributing to improved fuel efficiency and reduced emissions in vehicles. These technological strides are pivotal in meeting modern consumer expectations and complying with environmental regulations, driving the market forward. Consumer Preferences: In the automotive door handles market, consumer demand is increasingly focused on enhanced aesthetics, personalization, and advanced safety features. Modern consumers desire vehicles that not only perform well but also reflect their style and offer a sense of luxury. This has led to a preference for customizable door handles that can match the vehicle's exterior or the owner's taste, with options for different materials, colors, and finishes. Additionally, there's a growing emphasis on safety, with demand for door handles that incorporate advanced technologies such as keyless entry, touch operation, and biometric recognition, providing both convenience and security. These trends underscore the consumer's desire for vehicles that are not just means of transportation but also extensions of their identity and lifestyle, driving innovation in the automotive door handles market. Regulatory Requirements: Stringent safety and environmental regulations globally are driving the evolution of the automotive door handles market. Governments are imposing regulations that necessitate the incorporation of advanced safety features in vehicles, including secure and reliable door handles. Additionally, environmental regulations aimed at reducing CO2 emissions are pushing manufacturers towards using lightweight materials for door handles to contribute to overall vehicle weight reduction and enhanced fuel efficiency. Compliance with these regulatory standards is crucial for manufacturers, influencing design and material choices in the production of automotive door handles. Request for a sample copy of this report: Automotive Door Handles Market Report Segmentation: Breakup By Type: Exterior Door Handles Interior Door Handles On the basis of type, the market has been divided into exterior door handles and interior door handles. Breakup By Handle Type: Mechanical Automatic Mechanical is the largest handle type segment in the market due to its widespread usage across various vehicle segments and its reliability and cost-effectiveness compared to electronic or smart door handle systems. Breakup By Vehicle Type: Passenger Vehicles Commercial Vehicles Passenger vehicles represent the largest vehicle type segment in the market as they constitute most vehicles on the road globally, driving higher demand for automotive door handles compared to commercial or off-road vehicles. Breakup By Sales Channel: Original Equipment Manufacturer (OEM) Aftermarket Original equipment manufacturer (OEM) is the largest sales channel segment in the market because automakers typically procure door handles directly from OEM suppliers as part of their vehicle manufacturing process, resulting in higher sales volume compared to aftermarket or third-party channels. Breakup By Region: North America (United States, Canada) Asia Pacific (China, Japan, India, South Korea, Australia, Indonesia, Others) Europe (Germany, France, United Kingdom, Italy, Spain, Russia, Others) Latin America (Brazil, Mexico, Others) Middle East and Africa Asia Pacific is the largest region in the market due to the significant automotive production and sales volumes in countries like China, Japan, and India, driving demand for automotive door handles in the region. Global Automotive Door Handles Market Trends: The widespread adoption of electronic and smart door handles that enhance vehicle security and convenience represents one of the key factors influencing the growth of the automotive door handles market across the globe. These handles often feature keyless entry, touch-based locking and unlocking mechanisms, and integration with vehicle security systems. Additionally, the demand for lightweight materials, such as plastics and composites, is on the rise to improve fuel efficiency and reduce carbon emissions. This shift is also driven by stringent environmental regulations pushing the automotive industry towards sustainability. Furthermore, the aesthetic appeal of door handles is becoming a focal point for manufacturers aiming to differentiate their vehicles in a competitive market. Customization options and innovative designs are increasingly offered to meet consumer demands for personalization and luxury. Who are the key players operating in the industry? The report covers the major market players including: ALPHA Corporation CI Car International Pvt. Ltd. Huf Hulsbeck & Furst GmbH & Co. KG HUSHAN Autoparts Inc. MinebeaMitsumi Inc. Sakae Riken Kogyo Co. Ltd. Sandhar Technologies Limited TriMark Corporation Xin Point Corporation Ask Analyst & Browse full report with TOC List of Figures: If you require any specific information that is not covered currently within the scope of the report, we will provide the same as a part of the customization. About Us: IMARC Group is a global management consulting firm that helps the world's most ambitious changemakers to create a lasting impact. The company provides a comprehensive suite of market entry and expansion services. IMARC offerings include thorough market assessment, feasibility studies, company incorporation assistance, factory setup support, regulatory approvals and licensing navigation, branding, marketing and sales strategies, competitive landscape and benchmarking analyses, pricing and cost research, and procurement research. Contact US: IMARC Group 134 N 4th St. Brooklyn, NY 11249, USA Email: sales@ Tel No:(D) +91 120 433 0800 United States: +1-631-791-1145 Media Contact Company Name: IMARC Group Contact Person: Elena Anderson Email: Send Email Phone: +1-631-791-1145 Address: 134 N 4th St. City: Brooklyn State: NY Country: United States Website:
