How did birds start flying? Scientists find answers through feathered dinosaur fossil
A well preserved Archaeopteryx fossil has offered detailed analysis into the evolution of flight of birds some 150 million years ago, according to a study. This comes more than 160 years after the remains of Archaeopteryx were discovered for the first time. In a new study, published in the Nature journal on Wednesday, scientists have conducted a CT-scan of a nearly complete and uncrushed specimen to gain fresh insights into how birds started flying, The New York Times reported.
It all started in 1861 when a group of scientists discovered Archaeopteryx in Germany's Solnhofen. This was found in limestones that were nearly 150 million years old. Back then, they were not aware that the fossilised skeleton, along with the several others that followed, would go on to provide major evidence regarding the theory of evolution.The fossil in a German quarry had visible feathers that instantly made it one of the earliest known bird candidates, the Guardian reported. This is the first specimen to have been identified with specialised wing feathers on the upper arm bone. The feathers go on to create a smooth aerodynamic line from the wing to body.
Dr Jingmai O'Connor, who led the research, said that the Archaeopteryx specimens have changed the way people "see the world" in comparison to other fossils. The paleontologist at the Field Museum in Chicago, along with his team, sheds light on the soft tissues along with the skeleton of the Chicago Archaeopteryx specimen.
Although Archaeopteryx is not considered among the firsts in dinosaurs to have 'wings,' O'Connor suggests that it could probably be the earliest known dinosaur that had the capability to fly using its feathers.Such feathers remain missing in other feathered dinosaurs, even though they remain closely associated with birds.The research highlights that the wing feathers of those dinosaurs only reached the elbow, adding that "non-avian dinosaurs couldn't fly". However, Archaeopteryx had this ability in it.
Also Read: Jamie Lee Curtis regrets undergoing plastic surgery at just 25, reveals the reason behind her decision
The latest specimen was owned privately earlier. The Field Museum acquired it in 2022 and put it up for display last year.This Chicago specimen helped the researchers to look into more details into Archaeopteryx and how it could fly. The first time when this fossil was brought to the museum, it had the same colour as its surrounding rock. The researchers even found it difficult to see through most of the soft-tissue.Later on, the Field Museum scientists did CT-scan and illuminated it using the UV light to have its digital map. Chicago Archaeopteryx's bones remained preserved in three dimensions. This helped the team in having a better evaluation of its skull's palate.
Also Read : UFC 317 fight card: Dana White announces headliners for vacant lightweight title; other major clashes
1. Could Chicago Archaeopteryx fly?The latest study suggests that the "beautifully preserved" Archaeopteryx had tertial feathers that reveal major details into its flying capabilities.
2. When and where was the first Archaeopteryx fossil discovered? According to reports, it was found in 1861 in 150 million-years-old limestones from Germany's Solnhofen.
Disclaimer Statement: This content is authored by a 3rd party. The views expressed here are that of the respective authors/ entities and do not represent the views of Economic Times (ET). ET does not guarantee, vouch for or endorse any of its contents nor is responsible for them in any manner whatsoever. Please take all steps necessary to ascertain that any information and content provided is correct, updated, and verified. ET hereby disclaims any and all warranties, express or implied, relating to the report and any content therein.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
&w=3840&q=100)
First Post
5 hours ago
- First Post
Germany eyes 'cyber dome' with Israel to counter digital threats
Germany is aiming to establish a joint German-Israeli cyber research centre and deepen collaboration between the two countries' intelligence and security agencies. read more Germany is looking to set up a joint cyber research centre with Israel and strengthen cooperation between their intelligence and security services, Interior Minister Alexander Dobrindt said on Sunday. Germany counts Israel among its closest European allies and Berlin has increasingly turned to Israeli defence expertise as it seeks to enhance its military strength and NATO role amid rising concerns over threats from Russia and China. 'Military defence alone is not enough to meet this new era in security. A robust upgrade in civil defence is just as vital to reinforce our overall defence posture,' Dobrindt said during his visit to Israel, according to a report by Bild newspaper. STORY CONTINUES BELOW THIS AD Dobrindt, who took office last month under new Chancellor Friedrich Merz, arrived in Israel on Saturday. The Bild report said Dobrindt presented a five-point initiative aimed at creating a 'cyber dome' for Germany as part of its national cyber defence plan. Meanwhile, Bavarian Prime Minister Markus Soeder on Sunday urged the procurement of 2,000 interceptor missiles to equip Germany with an 'Iron Dome' system modelled on Israel's short-range missile defence capability.
&w=3840&q=100)
Business Standard
6 hours ago
- Business Standard
World's first silicon-free computer proves potential for future replacement
Researchers have built a computer from scratch without silicon, a "milestone" in showing that it is possible to one day replace the material that fuelled the bulk of technology advancements over the past half a century, by making devices smaller and faster. Built at a nanofabrication unit at The Pennsylvania State University in the US, the research team has demonstrated the successful working of the world's first CMOS computer made using two-dimensional materials, which are paper-thin, but at the nano-level. It is described in a paper in the journal Nature. 'Complementary Metal-Oxide-Semiconductor', or CMOS, is widely used in designing electronic circuits. It consumes low power and accommodates more components. The development is acknowledged as pioneering and a starting point in creating not just alternatives to silicon, but a roadmap for a new generation of still smaller, more flexible electronics. Saptarshi Das, professor of engineering science and mechanics at the The Pennsylvania State University (Penn State), and lead researcher on the paper, told PTI, "In the short term, you would like to augment silicon with these two-dimensional (2D) materials, because they offer new functionalities -- including in sensors and memory devices. "This is why our paper is, I would say, a milestone, because it shows that it is possible in a way to replace silicon one day," Das said. Silicon, whose conductivity can be manipulated for controlling electricity flow, has been foundational in advancing technology by helping electronics shrink in size, since 1947 when a transistor was first made using the material. A transistor regulates electric signals and acts as a building block for an electronic circuit. But now, nearly seven decades later, as electronic devices continue to become smaller, silicon may have hit a wall -- scientists say it may not be able to function as well, if devices are to get tinier. Das said, "The trajectory of silicon has stalled." Lead author Subir Ghosh, a doctoral student at Penn State, explains, "We have used molybdenum disulphide (MoS2) and tungsten diselenide (WSe2) -- both quite common in the 2D materials community -- to make our semiconductor devices." "Here at Penn State, you can grow this material over a large two-inch wafer. They are also scaleable, which means that the industry can also adopt these 2D material," Ghosh added. The semiconductor industry is said to be governed by Moore's law, according to which the number of transistors in circulation double every 18 months (a year and a half). However, transistors are no longer becoming smaller. This is because silicon is a bulky material -- like a brick -- which cannot be made any smaller owing to detrimental effects, such as an increased leakage current, power consumption and a reduced performance of the device, Das explained over a video call. "Now, for example, if we need to construct a multi-storied building, we will use bricks. But now, what if I tell you that the best choice for this building is not bricks -- but paper, which is extremely thin. You can then get back all the good qualities you need to make a device very small," Das said. Research teams around the world, including China, are fiercely working for over a decade in developing 2D materials to initially support silicon in making smaller devices, but eventually transition away from having to use the bulky material itself. Scientists at China's Fudan University have created a RISC-V microprocessor chip by assembling transistors made of 2D materials. The chip, described in a paper published in April in the journal Nature, also used a low power to function. Mayank Shrivastava, professor at the division of electrical, electronics and computer sciences, Indian Institute of Science, Bengaluru, and not involved in the study, told PTI, that a successful demonstration of the computer built using 2D materials is pioneering and "marks a watershed moment in the evolution of semiconductor technology." "While we have seen individual devices and simple circuits from 2D materials before, building an actual computer, even one with a single instruction set, completely from 2D semiconductors is a bold leap," he said. Shrivastava added that these developments are also a "wake-up call that the silicon race is maturing, and the next race, based on 2D materials, has already begun". Das from Penn State explained that the 2D computer -- a primitive one that present day semiconductor foundries might be building in the 1960s -- was designed to perform a single instruction, which on repeat, can do all the basic functions of addition, subtraction and multiplication. Ghosh explained this single instruction, named 'reverse subtract, skip if borrow'. "In order to subtract, you have two numbers. But while subtracting a bigger number from a smaller one, we need to 'borrow'. So, when a 'borrow' is raised, our computer will skip that instruction and move on to the next," the lead author said. The computer achieved a high drive current, with a low leakage and power dissipation, enabling 2D-semiconductor circuits to operate below three volts and up to 25 kiloHertz of frequency, the study says. Shrivastava, not involved in the study, said 2D materials hold the promise of pushing electronics beyond what silicon alone can offer. "With atomic-scale thickness, high mobility, and near-ideal electrostatic control, these materials are natural candidates for continuing Moore's Law in spirit, through performance-per-watt improvements, ultra-low leakage, and unprecedented device scaling," he said. The field of 2D materials -- no longer a 'potential' one, but a strategic imperative -- offers a rare opportunity to leapfrog into next-generation semiconductor leadership, he added. However, the Penn State study's limitations need to be considered, the IISc professor said. "The operating speed of 25 kiloHertz is still far behind silicon, while challenges remain in improving channel mobility, gate oxides, contacts, managing parasitics, reliability, ensuring yield, and achieving top-gate device integration or nanosheet devices for scale," he said. "It is also vital to emphasise that while this milestone is academically significant, its commercial translation hinges on building infrastructure -- testbeds, fabrication capabilities, tool ecosystems, and skillsets -- that don't yet exist in many countries." Despite the limits, Shrivastava described the 2D computer as a "foundational milestone that, over time, have historically driven transformative changes." On Friday, India's electronics and IT Ministry was reported to consider funding research on 2D materials. They plan on floating expressions of interest for selecting which projects to fund, officials said.
Time of India
7 hours ago
- Time of India
Researchers build world's first computer without silicon using 2D materials at Penn State
Researchers have built a computer from scratch without silicon , a "milestone" in showing that it is possible to one day replace the material that fuelled the bulk of technology advancements over the past half a century, by making devices smaller and faster. Built at a nanofabrication unit at The Pennsylvania State University in the US, the research team has demonstrated the successful working of the world's first CMOS computer made using two-dimensional materials, which are paper-thin, but at the nano-level. It is described in a paper in the journal Nature. ' Complementary Metal-Oxide-Semiconductor ', or CMOS, is widely used in designing electronic circuits. It consumes low power and accommodates more components. The development is acknowledged as pioneering and a starting point in creating not just alternatives to silicon, but a roadmap for a new generation of still smaller, more flexible electronics. Saptarshi Das, professor of engineering science and mechanics at the The Pennsylvania State University (Penn State), and lead researcher on the paper, told PTI, "In the short term, you would like to augment silicon with these two-dimensional (2D) materials, because they offer new functionalities -- including in sensors and memory devices. Live Events "This is why our paper is, I would say, a milestone, because it shows that it is possible in a way to replace silicon one day," Das said. Silicon, whose conductivity can be manipulated for controlling electricity flow, has been foundational in advancing technology by helping electronics shrink in size, since 1947 when a transistor was first made using the material. A transistor regulates electric signals and acts as a building block for an electronic circuit. But now, nearly seven decades later, as electronic devices continue to become smaller, silicon may have hit a wall -- scientists say it may not be able to function as well, if devices are to get tinier. Das said, "The trajectory of silicon has stalled." Lead author Subir Ghosh, a doctoral student at Penn State, explains, "We have used molybdenum disulphide (MoS2) and tungsten diselenide (WSe2) -- both quite common in the 2D materials community -- to make our semiconductor devices." "Here at Penn State, you can grow this material over a large two-inch wafer. They are also scaleable, which means that the industry can also adopt these 2D material," Ghosh added. The semiconductor industry is said to be governed by Moore's law, according to which the number of transistors in circulation double every 18 months (a year and a half). However, transistors are no longer becoming smaller. This is because silicon is a bulky material -- like a brick -- which cannot be made any smaller owing to detrimental effects, such as an increased leakage current, power consumption and a reduced performance of the device, Das explained over a video call. "Now, for example, if we need to construct a multi-storied building, we will use bricks. But now, what if I tell you that the best choice for this building is not bricks -- but paper, which is extremely thin. You can then get back all the good qualities you need to make a device very small," Das said. Research teams around the world, including China, are fiercely working for over a decade in developing 2D materials to initially support silicon in making smaller devices, but eventually transition away from having to use the bulky material itself. Scientists at China's Fudan University have created a RISC-V microprocessor chip by assembling transistors made of 2D materials. The chip, described in a paper published in April in the journal Nature, also used a low power to function. Mayank Shrivastava, professor at the division of electrical, electronics and computer sciences, Indian Institute of Science , Bengaluru, and not involved in the study, told PTI, that a successful demonstration of the computer built using 2D materials is pioneering and "marks a watershed moment in the evolution of semiconductor technology." "While we have seen individual devices and simple circuits from 2D materials before, building an actual computer, even one with a single instruction set, completely from 2D semiconductors is a bold leap," he said. Shrivastava added that these developments are also a "wake-up call that the silicon race is maturing, and the next race, based on 2D materials, has already begun". Das from Penn State explained that the 2D computer -- a primitive one that present day semiconductor foundries might be building in the 1960s -- was designed to perform a single instruction, which on repeat, can do all the basic functions of addition, subtraction and multiplication. Ghosh explained this single instruction, named 'reverse subtract, skip if borrow'. "In order to subtract, you have two numbers. But while subtracting a bigger number from a smaller one, we need to 'borrow'. So, when a 'borrow' is raised, our computer will skip that instruction and move on to the next," the lead author said. The computer achieved a high drive current, with a low leakage and power dissipation, enabling 2D-semiconductor circuits to operate below three volts and up to 25 kiloHertz of frequency, the study says. Shrivastava, not involved in the study, said 2D materials hold the promise of pushing electronics beyond what silicon alone can offer. "With atomic-scale thickness, high mobility, and near-ideal electrostatic control, these materials are natural candidates for continuing Moore's Law in spirit, through performance-per-watt improvements, ultra-low leakage, and unprecedented device scaling," he said. The field of 2D materials -- no longer a 'potential' one, but a strategic imperative -- offers a rare opportunity to leapfrog into next-generation semiconductor leadership, he added. However, the Penn State study's limitations need to be considered, the IISc professor said. "The operating speed of 25 kiloHertz is still far behind silicon, while challenges remain in improving channel mobility, gate oxides, contacts, managing parasitics, reliability, ensuring yield, and achieving top-gate device integration or nanosheet devices for scale," he said. "It is also vital to emphasise that while this milestone is academically significant, its commercial translation hinges on building infrastructure -- testbeds, fabrication capabilities, tool ecosystems, and skillsets -- that don't yet exist in many countries." Despite the limits, Shrivastava described the 2D computer as a "foundational milestone that, over time, have historically driven transformative changes." On Friday, India's electronics and IT Ministry was reported to consider funding research on 2D materials. They plan on floating expressions of interest for selecting which projects to fund, officials said.
