
Illinois American Water Recognized for Excellence in Water Quality by Partnership for Safe Water
'This achievement reflects the efforts of our incredible team, who are dedicated to maintaining high standards and helping to protect the health and safety of customers.'
Share
'At Illinois American Water, we are pleased to be recognized in delivering safe, clean, reliable, and affordable drinking water to our customers,' said Rebecca Losli, President, Illinois American Water. 'This achievement reflects the efforts of our incredible team, who are dedicated to maintaining high standards and helping to protect the health and safety of customers.'
The Pontiac District Water Treatment Plant delivers water to 4,500 customers per day; The Streator District Water Treatment Plant delivers water to 7,700 customers per day.
Illinois American Water continually demonstrates its ongoing commitment to improving the quality of drinking water delivered to customers by optimizing its system operations. Through PSW, long-term achievements are celebrated with awards for maintaining consistent, high-quality performance and commitment to optimization at the water treatment plant or distribution system.
Learn more about the PSW awards here.
About Illinois American Water
Illinois American Water, a subsidiary of American Water, is the largest regulated water utility in the state, providing safe, clean, reliable and affordable water and wastewater services to approximately 1.3 million people. American Water also operates a quality control and research laboratory in Belleville.

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Business Wire
a day ago
- Business Wire
Hawaii American Water Granted New Rates by Hawaii Public Utilities Commission
HONOLULU--(BUSINESS WIRE)--The Hawaii Public Utilities Commission (HPUC) has approved new wastewater rates for Hawaii American Water's Hawaii Kai, Mauna Lani, and Waimea service areas. The company's rate request was filed on August 5, 2024, and was primarily driven by over $40 million in local infrastructure upgrades in all three districts. The new rates reinforce the company's commitment to replace aging infrastructure, provide safe and reliable service, comply with environmental regulations and support infrastructure improvements for treatment plants, collection systems and pump stations. 'We are committed to making necessary infrastructure investments that allow us to continue providing safe and reliable wastewater services, while also enhancing the systems for long-term sustainability, resiliency and environmental protection,' said Lee Mansfield, Senior Manager Operations, Hawaii American Water. 'Our approach to consistent and efficient investment balanced with managing costs helps us deliver reliable and affordable service to our customers.' New rates are expected to be effective in early August 2025. The typical single-family customer in Hawaii Kai will see a monthly rate increase of approximately $4. For our Big Island operations at Mauna Lani and Waimea the typical single-family customer will see a rate increase of approximately $18 to $25 per month. The last rate adjustments were September 2003 for Mauna Lani operations and January 2011 for Waimea operations. The company last filed a rate case for the Hawaii Kai system in 2021. Customers will receive information about the new rates on their Hawaii American Water bill. Information will also be available on the company's website under Customer Service Billing, Your Wastewater Rates. About American Water American Water (NYSE: AWK) is the largest regulated water and wastewater utility company in the United States. With a history dating back to 1886, We Keep Life Flowing® by providing safe, clean, reliable and affordable drinking water and wastewater services to more than 14 million people with regulated operations in 14 states and on 18 military installations. American Water's 6,700 talented professionals leverage their significant expertise and the company's national size and scale to achieve excellent outcomes for the benefit of customers, employees, investors and other stakeholders. For more information, visit and join American Water on LinkedIn, Facebook, X and Instagram. About Hawaii American Water Hawaii American Water, a subsidiary of American Water, provides high-quality wastewater services to approximately 30,000 people. AWK-IR


Business Wire
4 days ago
- Business Wire
Quantum Announces Receipt of Nasdaq Notice Regarding Delayed Form 10-K Filing
SAN JOSE, Calif.--(BUSINESS WIRE)--Quantum Corporation (Nasdaq: QMCO) announced today that it received a notice (the 'Notice') from the Listing Qualifications staff of the Nasdaq Stock Market LLC ('Nasdaq') on July 17, 2025 stating that the Company is not in compliance with Nasdaq Listing Rule 5250(c)(1) as a result of the Company's delay in filing its Annual Report on Form 10-K for the fiscal year ended March 31, 2025 (the 'Annual Report') with the Securities and Exchange Commission (the 'SEC'). On June 30, 2025, the Company filed a Notification of Late Filing on Form 12b-25 indicating that the filing of the Annual Report would be delayed due to additional time needed to review its accounting related to certain revenue contracts as well as the application of standalone selling price under applicable accounting standards. The Company has 60 days from the date of the Notice either to file the Annual Report or to submit a plan to Nasdaq to regain compliance with Nasdaq's listing rules. The Company is working diligently to complete its review and file the Annual Report as soon as possible within the timeline prescribed by Nasdaq. The Notice has no immediate effect on the listing or trading of the Company's common stock, which will continue to trade on Nasdaq, subject to Quantum's compliance with other continued listing requirements of Nasdaq. About Quantum Quantum delivers end-to-end data management solutions designed for the AI era. With over four decades of experience, our data platform has allowed customers to extract the maximum value from their unique, unstructured data. From high-performance ingest that powers AI applications and demanding data-intensive workloads, to massive, durable data lakes to fuel AI models, Quantum delivers the most comprehensive and cost-efficient solutions. Leading organizations in life sciences, government, media and entertainment, research, and industrial technology trust Quantum with their most valuable asset – their data. Quantum is listed on Nasdaq (QMCO). Quantum and the Quantum logo are registered trademarks of Quantum Corporation and its affiliates in the United States and/or other countries. All other trademarks are the property of their respective owners. Forward-Looking Information The information provided in this press release may include forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 (the 'Exchange Act'). These forward-looking statements are largely based on our current expectations and projections about future events affecting our business. Such forward-looking statements include, in particular, statements related to the ongoing review of certain accounting matters; timing of completion of the review and filing of the Annual Report; and the Company's plans, objectives and intentions that are not historical facts generally. These forward-looking statements may be identified by the use of terms and phrases such as 'anticipates', 'believes', 'can', 'could', 'estimates', 'expects', 'forecasts', 'intends', 'may', 'plans', 'projects', 'targets', 'will', and similar expressions or variations of these terms and similar phrases. Additionally, statements concerning future matters and other statements regarding matters that are not historical are forward-looking statements. Investors are cautioned that these forward-looking statements relate to future events or our future performance and are subject to business, economic, and other risks and uncertainties, both known and unknown, that may cause actual results, levels of activity, performance or achievements to be materially different from those expressed or implied by any forward-looking statements. These forward-looking statements involve risks and uncertainties that could cause actual results to differ materially from those projected, including without limitation, the following: the outcome of the pending review of the Company's accounting related to its revenue contracts and application of standalone selling price; the discovery of additional and unanticipated information during the procedures required to be completed before the Company is able to file its Annual Report on Form 10-K; the completion of the Company's fiscal 2025 audit and any adjustments resulting therefrom; risks related to the need to address the many challenges facing our business; any changes to the assumptions underlying the Company's closing process and auditors' audit; risks related to legal proceedings and investigations; the ability to meet stock exchange continued listing standards; the possibility that the Nasdaq may delist the Company's securities; risks related to the Company's ability to implement and maintain effective internal control over financial reporting in the future; the impact of these factors on the Company's performance and outlook; and other risks that are described herein, including but not limited to the items discussed in 'Risk Factors' in our filings with the SEC, including our most recent Annual Report on Form 10-K filed with the SEC, and any subsequent filings with the SEC. We do not intend to update or alter its forward-looking statements, whether as a result of new information, future events or otherwise, except as required by applicable law or regulation.


Business Wire
4 days ago
- Business Wire
Stratasys Launches GrabCAD Print Pro™ 2025 to Accelerate Production Fixture Creation and Streamline Additive Workflows
MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys Ltd. (NASDAQ: SSYS) today announced the release of GrabCAD Print Pro™ 2025, an important update to its print preparation software designed to reduce time, complexity, and cost across additive manufacturing operations. The software update includes full integration of fixturemate™, a design automation application developed by trinckle to simplify fixture design. fixturemate allows users to generate production-ready fixtures in minutes – no CAD experience required. With full integration of fixturemate, and enhanced features like 3D textures, void body creation, and multi-session support, the new version gives users more control over part functionality and throughput while simplifying production workflows and reducing reliance on traditional engineering resources. Manufacturers increasingly rely on additive manufacturing to improve agility on the factory floor, but many still face bottlenecks caused by fragmented software workflows and the need for skilled engineering labor. GrabCAD Print Pro™ 2025 shifts the work of fixture design from design engineers downstream to AM operators - enabling GrabCAD Print Pro users to independently create fixtures within GrabCAD Print Pro instead of the traditional way of using different CAD tools by different users with specialized design skills. Simplifying this process reduces creating new fixtures from days to hours. "Before GrabCAD Print Pro '25, even a simple fixture might take a day or more and require CAD skills and a manufacturing engineer," said Jeff McGarry, Managing Partner at Automation Intelligence. "With GrabCAD Print Pro '25 and fixturemate, we've dramatically accelerated our design workflow, turning concepts into printable CAD models faster than ever before." The release builds on Stratasys' commitment to deliver open, connected solutions that solve real manufacturing challenges. Customers can now: Create production-ready fixtures without CAD tools or licenses, reducing fixture design time by up to 80%. Apply 3D textures directly in GrabCAD Print Pro, enhancing grip, fit, and aesthetics while avoiding file size issues from traditional CAD workflows. Use insert and void body tools to improve part functionality and reduce support material and post-processing. Run multiple print prep sessions in parallel, scaling setup across print jobs and increasing overnight/weekend utilization. Consolidate multiple software licenses into a single platform with support for all five Stratasys technologies and select third-party powder bed fusion (PBF) and stereolithography (SL) systems. 'GrabCAD Print Pro 2025 reflects our platform approach to additive manufacturing—focused on eliminating workflow barriers while expanding material and printer support,' said Victor Gerdes, Vice President of Software, Stratasys. 'We're addressing real-world constraints, like labor shortages and software complexity, with tools that put more capability into the hands of the people running the printers. This release gives manufacturers the flexibility and scale they need to move faster.' GrabCAD Print Pro 2025 is available through Stratasys' direct and indirect channels. A 30-day free trial with full-feature access is available now. For more information, visit About Stratasys Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products, and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world's leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care. To learn more about Stratasys, visit the Stratasys blog, X/Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including Stratasys' websites, to share material, non-public information pursuant to the SEC's Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings. Stratasys, GrabCAD and GrabCAD Print Pro are trademarks or registered trademarks of Stratasys Ltd. and/or its affiliates. Trinckle and fixturemate are trademarks or registered trademarks of trinckle 3D GmbH. Learn more at Note Regarding Forward-Looking Statement The statements in this press release relating to Stratasys' expectations of the benefits that it will receive from its partnership with trinckle, are forward-looking statements reflecting management's current expectations and beliefs. These forward-looking statements are based on current information that is, by its nature, subject to rapid and even abrupt change. Due to risks and uncertainties associated with Stratasys' business, actual results could differ materially from those projected or implied by these forward-looking statements. These risks and uncertainties include, but are not limited to: the risk that the benefits that Stratasys expects from the partnership will not materialize, or could be less, than Stratasys currently expects, due to technical or other unforeseen reasons; and other risk factors more fully explained under the caption 'Risk Factors' in Stratasys' most recent Annual Report on Form 20-F, filed with the Securities and Exchange Commission (SEC) on March 3, 2015. Stratasys is under no obligation (and expressly disclaims any obligation) to update or alter its forward-looking statements, whether as a result of new information, future events or otherwise, except as otherwise required by the rules and regulations of the SEC.