Making Of India's Longest Rail Tunnel In Uttarakhand: When Project Looked Jeopardised
Janasu:
The completion of India's longest rail tunnel between Devprayag and Janasu in Uttarakhand faced significant challenges, including moments when it seemed the tunnel might collapse and jeopardise the whole project, Larsen & Toubro Limited (L&T) said on Saturday.
"The tunnel boring machine (TBM) named 'Shakti' was about five km inside the tunnel when it encountered a gush of water from all directions at the rate of around 1,500 litres per minute," Rakesh Arora, Project Director of the tunnel, told PTI.
"Besides the TBM operator, there were 200 people inside the tunnel at that time. It was one of the toughest moments when the tunnel was at risk of flooding or collapsing. However, we took corrective measures immediately," he said.
Mr Arora said the situation did not improve for around a month. His team struggled to overcome it by using a combination of chemical as well as cement grouting to stabilise the rings and surrounding rock, consequent to which, the water flow started reducing and the engineers could stabilise the interiors successfully, he added.
"Besides, there were occasions when huge pressure from the surrounding soft rock posed a serious risk to the tunnel's progress, which was successfully handled by speeding up the excavation works with a combination of lubricating the TBM shield using bentonite," Mr Arora added.
The 14.57-km tunnel on the 125-km Rishikesh-Karnaprayag Rail Link Project achieved a breakthrough on April 16 in the presence of Railway Minister Ashwini Vaishnaw, Uttarakhand Chief Minister Pushkar Singh Dhami and other railway and state officials.
Devprayag-Janasu tunnel, besides being the longest, was completed with the fastest speed in the world. It was for the first time that a Single Shield Hard Rock TBM of 9.11-metre diameter was used in the Himalayas to excavate the mountains.
According to the Rail Vikas Nigam Limited (RVNL), out of 14.57 km, 10.49 km was completed through TBM and the rest with the traditional drill and blast method.
"The 9.69-metre diameter Cabrera tunnel in Spain was built by a Double Shield Tunnel Boring Machine (TBM) at an average rate of 423 metres per month and the 10.49-km Devprayag-Janasu tunnel has been completed by Single Shield TBM at an average rate of 413 metres per month, becoming the second fastest in the world," RVNL Chairman and Managing Director Pradeep Gaur had told PTI on the day breakthrough was achieved.
"As the Himalayas are the most challenging geologically, it makes the whole project extremely demanding and interesting. Out of a total of 125 km, 105 km pass through the tunnels.
"Around three km are covered through bridges and four km by adits (openings) and cross passages; the left portion is just 12 to 13 km which consists of 12 station yards," Gaur added.
Mr Arora said the TBM's biggest enemies are water ingress and soft squeezing rock which try to obstruct them from digging a tunnel in the Himalayas. Once a TBM is stuck inside a tunnel, the project is abandoned, he added.
According to L&T officials, besides the state-of-the-art TBM machine, multiple scientific and physical investigations helped them ascertain what kind of rocks they would get ahead and they made preparations accordingly.
"There is a manual probe through drilling and studying the speed of drilling to find out the rock conditions up to 60 metres ahead. Hard rock gives us slow penetration while soft rocks make penetration faster," Mr Arora said.
"The scientific method is Tunnel Seismic Prediction (TSP) in which seismic waves are emitted and a report is prepared on the condition of rocks ahead by studying the speed of the waves. TSP tells us what kind of rock is 100 metres ahead of TBM and 15 metres on both sides of TBM," he said.
The construction firm said they used another physical method to know the rock conditions by investigating the excavated muck.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Deccan Herald
2 hours ago
- Deccan Herald
July 1, 2025: Best photos from around the world
Tourists visit Hadimba Devi Temple at Manali, in Kullu district Credit: PTI Photo Tribals perform during the celebrations of 'Hul Diwas', organised in remembrance of the Santhal rebellion, on the outskirts of Bolpur, in Birbhum Credit: PTI Photo A car drives past as a wildfire burns near Seferihisar in Izmir province, Turkey Credit: Reuters Photo Partial reopening of the National Museum of Brazil, amid its reconstruction after 2018 fire, in Rio de Janeiro Credit: Reuters Photo Firefighters work to put out a fire at the market hit by recent shelling, which local Russian-installed authorities called a Ukrainian military strike, in the course of Russia-Ukraine conflict in Donetsk Credit: Reuters Photo Animal health worker Eduardo Lugo treats the wounds of a cow as Chihuahua ranchers intensify surveillance for the screwworm after the U.S. suspended cattle imports following the detection of the parasite in southern Mexico
Mint
3 hours ago
- Mint
Union Carbide's 337-ton waste finally incinerated, 40 years after Bhopal gas tragedy
The entire 337 tons of waste of the now-defunct Union Carbide factory in Bhopal, Madhya Pradesh has been incinerated, officials said. The waste has been reduced to ashes at a disposal plant in the state's Pithampur town, they said on June 30 – six months after the toxic consignment was brought to the unit. 'The pollution board officials have informed us that all the waste has been disposed of as per protocol,' Bhopal Gas Tragedy Relief and Rehabilitation Director, Swatanta Kumar Singh, was quoted as saying in The Indian Express. The process of relocating the toxic waste from the Union Carbide factory began on January 1, about 40 years after the tragedy. While 30 tons of the waste was burnt earlier during three trials at the plant, the remaining 307 tons was incinerated between May 5 and the intervening night of June 29-30, the State Pollution Control Board official was quoted as saying by news agency PTI. The waste disposal at the plant in Dhar district's Pithampur industrial town was undertaken following the directives of the Madhya Pradesh High Court. This exercise initially faced protests from local residents who feared adverse impacts on the environment and their health. The highly poisonous methyl isocyanate gas (MIC) leaked from the Union Carbide's pesticide factory in Bhopal on the intervening night of December 2-3, 1984, causing one of the biggest industrial disasters in the world. At least 5,479 persons were killed, and thousands were maimed. The process of burning 307 tons of the factory waste at the disposal plant operated by a private company in Pithampur began around 7.45 pm on May 5 and ended on the intervening night of June 29-30 at 1 am, State Pollution Control Board's regional officer Srinivas Dwivedi told PTI. It was incinerated at a maximum rate of 270 kg per hour under the supervision of technical experts of the Central Pollution Control Board and the State Pollution Control Board, following the High Court's directive issued on March 27, he said. "We have no information about any adverse effect on the health of people living in surrounding areas during the incineration of the waste," he said. According to Dwivedi, the ash and other residue left after burning the total 337 tons of waste were being safely packed in sacks and kept in a leak-proof storage shed of the plant. Special landfill cells were being constructed as per scientific process to bury the residue (waste leftovers) in the ground, and this work is expected to be completed by November, he said. "If everything goes well, these residue will also be disposed of by December. Before this, the residue will be treated scientifically so that their burial does not cause any harm to the environment," the official said. Later, in a press release, the State Pollution Control Board said about 19 tons of 'excess waste' found in the soil of the Union Carbide factory premises is being incinerated at the Pithampur plant, and this process will be completed by July 3. According to the release, 2.22 tons of waste from the packaging material, including all the waste from the Union Carbide factory was brought in January in vehicles, has been put separately, and it will be buried scientifically after treatment. The pollution board officials have informed us that all the waste has been disposed of as per protocol. The waste from the Union Carbide factory included soil from the premises of the closed unit, reactor residue, Sevin (pesticide) residue, naphthal residue and "semi-processed" residue. Scientific evidence shows that effect of Sevin and naphthal chemicals in this waste has already become "almost negligible". There was no presence of methyl isocyanate gas in the waste and it also did not contain any radioactive particles, as per the State Pollution Control Board. Key Takeaways The incineration of the Union Carbide waste is a pivotal step in addressing the aftermath of the Bhopal disaster. Community protests highlight the ongoing concerns regarding environmental safety and health risks associated with hazardous waste disposal. The completion of this process illustrates the importance of adhering to judicial directives and environmental protocols.
The Print
8 hours ago
- The Print
Over 40 years after Bhopal gas tragedy, all 337 tons of Union Carbide waste burnt to ashes
The waste disposal at the plant in Dhar district's Pithampur industrial town was undertaken following directives of the Madhya Pradesh High Court, an exercise which initially faced protests from local residents who feared adverse impact on the environment and their health. While 30 tons of the waste was burnt earlier during three trials at the plant, the remaining 307 tons was incinerated between May 5 and the intervening night of June 29-30, the State Pollution Control Board official said, marking the end of a dark chapter in the 1984 Bhopal gas tragedy. Indore, Jun 30 (PTI) The entire 337 tons of waste of the defunct Union Carbide factory in Bhopal has been incinerated and reduced to ashes at a disposal plant in Madhya Pradesh's Pithampur town, an official said on Monday, six months after the toxic consignment was brought to the unit. The highly poisonous methyl isocyanate gas (MIC) leaked from the Union Carbide's pesticide factory in Bhopal on the intervening night of December 2-3, 1984, causing one of the biggest industrial disasters in the world. At least 5,479 persons were killed and thousands were maimed. The process of burning 307 tons of the factory waste at the disposal plant operated by a private company in Pithampur began around 7.45 pm on May 5 and ended on the intervening night of June 29-30 at 1 am, State Pollution Control Board's regional officer Srinivas Dwivedi told PTI. It was incinerated at a maximum rate of 270 kg per hour under the supervision of technical experts of the Central Pollution Control Board and the State Pollution Control Board, following the High Court's directive issued on March 27, he said. During the waste disposal process, the emission of different gases and particles from the Pithampur plant was monitored on a real-time basis by an online mechanism and all emissions were found to be within standard limits, the official said. 'We have no information about any adverse effect on the health of people living in surrounding areas during the incineration of the waste,' he said. According to Dwivedi, the ash and other residue left after burning the total 337 tons of waste were being safely packed in sacks and kept in a leak-proof storage shed of the plant. Special landfill cells were being constructed as per scientific process to bury the residue (waste leftovers) in the ground, and this work is expected to be completed by November, he informed. 'If everything goes well, these residue will also be disposed of by December. Before this, the residue will be treated scientifically so that their burial does not cause any harm to the environment,' the official said. Later, in a press release, the State Pollution Control Board said about 19 tons of 'excess waste' found in the soil of the Union Carbide factory premises is being incinerated at the Pithampur plant and this process will be completed by July 3. According to the release, 2.22 tons of waste of the packaging material in which all the waste of the Union Carbide factory was brought in January in vehicles has been put separately and it will be buried scientifically after treatment. During the burning of the Union Carbide waste, the emissions of particulate matter, sulphur dioxide, carbon monoxide, hydrogen sulphide, hydrogen fluoride and oxides of nitrogen as well as mercury, cadmium and other heavy metals from the Pithampur plant were found to be within standard limits, it said. The ambient air quality in villages around the plant — Tarapura, Chirakhan and Bajrangpura – also remained within prescribed standards during the incineration of the waste, it said. The waste was transported from Bhopal to the plant in Pithampur, about 250 km from the state capital, on January 2. Initially, 30 tons of waste was burnt at the plant during three trials. After this, citing the analysis report, the state government told the HC that during the trials conducted at the rates of 135 kg per hour, 180 kg per hour and 270 kg per hour, the emissions were found to be within prescribed limits. According to the state government, the waste from the Union Carbide factory included soil from the premises of the closed unit, reactor residue, Sevin (pesticide) residue, naphthal residue and 'semi-processed' residue. Scientific evidence shows that effect of Sevin and naphthal chemicals in this waste has already become 'almost negligible'. There was no presence of methyl isocyanate gas in the waste and it also did not contain any radioactive particles, as per the State Pollution Control Board. PTI HWP MAS GK RSY This report is auto-generated from PTI news service. ThePrint holds no responsibility for its content.
