Filthy water bottle? Here's how to clean it the right way
While my water bottle cupboard could use a declutter, the bottles could also benefit from a deep clean. However, I get stuck on knowing the best way to clean the water bottles and then keeping them that way.
So, I set myself the task of discovering the best way to clean a water bottle and maintain its cleanliness.
A self-cleaning water bottle? Yes, that's right! The LARQ Bottle PureVis is a self-cleaning and insulated stainless steel water bottle with a UV water purifier. It sanitizes water and cleans the inner surface of the bottle by neutralizing bacteria such as E-coli. It either works at a touch of a button or self cleans every two hours. What's more, it offers double-wall vacuum insulation to keep your cold water chilled for 24 hours and hot for 12.
I know that an unclean water bottle can be a health hazard, because every time you take a sip of water, or whatever concoction you prefer to drink, you are leaving behind bacteria. While it may seem easy to give your bottle a quick rinse through at the end of each day, it is simply not enough, even though it may look clean to the naked eye.
Another major problem I have is preventing mold growth, whether inside the bottle itself, within the threads that secure the lid, or around the lid and mouthpiece. It's one nasty that needs to be banished.
Mold has a fondness for warm and damp places where it will thrive and spread tiny spores into the air. It's considered a health hazard, so if you spot mold in your water bottle, you need to clean it out.
But how do you spot it, as it's not always visible with the naked eye? Mold could be lurking in your water bottle if you notice an unpleasant musty smell, the water appears cloudy, you spot a residue or film on your water bottle, or the water tastes unpleasant.
Get instant access to breaking news, the hottest reviews, great deals and helpful tips.
If you notice any of these signs, be sure to give your water bottle a deep clean to remove mold.
Top tip
I always leave my water bottles lid-free, to prevent any moisture from being trapped inside and causing a build-up of mold.
To avoid the buildup of mold and prevent contaminating your drinking water, wash your water bottle daily and ensure it dries completely. You don't need to give it a deep clean every day, but you should wash it in hot water and dish soap to remove any bacteria, especially around the mouthpiece.
If cleaning isn't your thing, opt for a water bottle that is dishwasher safe. However, do check which rack it can be washed on, as it will probably have to be placed on the top rack.
Another top tip is to look for a water bottle with a simple design. Check out the lid and mouthpiece. If it has lots of intricate parts, it will be more difficult to keep clean.
So, look for a bottle with a wide mouth, such as the HydroFlask 24oz Wide Flex Straw Cap Bottle, currently reduced to $30 at Amazon. My son owns this bottle, and I'd buy it just for the funky logo alone!
Smooth materials, such as stainless steel or BPA-free plastic, will also make your job easier.
You can even enhance your cleaning prowess with a bottle featuring a UV light that does the cleaning for you, such as LARQ's Bottle PureVis, which is currently reduced in some colorways to $69 at Amazon. You simply press a button to activate the light and wait a few seconds for it to sanitize your water.
Apart from investing in a water bottle that's easy to clean, you could try a drying rack designed specifically for water bottles. How about Kuppy's Silicone Bottle Drying Rack that's $19 at Amazon?
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Buzz Feed
9 hours ago
- Buzz Feed
Nara Smith Criticized Drinking Raw Milk While Pregnant
You know influencer Nara Smith, probably. It's possible you've seen her pop up amidst thousands of rounds of "tradwife" discourse, which she, of course, has an opinion on — but, we're not here to talk about that today. And you're not wrong! But what is significant about this particular video takes place near the very end, in which Nara states that "Even though I'm not a fan of cookies, these hit the spot with some cold raw milk." The safety of consuming raw milk is, to say the least, highly disputed. The CDC specifically states on its website that drinking milk that hasn't gone through the pasteurization process can expose those who consume it to illnesses like E. coli and listeria. "Some groups, such as children under 5, adults over 65, pregnant women, and people with weakened immune systems, are at a higher risk of serious illness from these germs," the agency states. That last bit is crucial because Nara is currently pregnant with her fourth child. Now, before we get into the "Here's what people are saying" of it all: At no point in the video does Nara actually show herself drinking raw milk. However, she does suggest that she drank it, and given that she is literally considered an influencer, perhaps encouraging other pregnant women to enjoy some raw milk and cookies isn't exactly a positive "influence." All of that being said, here's what people are saying: There you have it. A rare instance where reading the comments is actually a pretty good idea!
Yahoo
3 days ago
- Yahoo
'People are not happy': Presque Isle deals with swimming restrictions at Beaches 6 & 8
Presque Isle State Park lifeguards have been posted this week at the entrances of Beaches 6 and 8, more than 100 yards from the Lake Erie shoreline. Their job has been to politely inform visitors that swimming has been restricted at the popular beaches due to consistently high levels of E. coli bacteria. No one has been allowed to swim at Beaches 6 and 8 since July 8. "People are not happy and understandably so," said Matt Greene, the park's operations manager. "These are two of our most popular beaches and people have been going to them for a long time." High E. coli levels are a concern because they indicate a significant amount of sewage or animal waste in the water that can give swimmers gastrointestinal illness or skin infections. Park officials have been working with the Erie County Department of Health to figure out why levels are so high, and what can be done to lower them and once again allow people to swim at Beaches 6 and 8. "Right now, we don't have an explanation," Greene said. "We haven't seen any unusual storms that cause run off from nearby streams, or significant bird activity at those beaches." Though water samples taken at both beaches this week have not exceeded the daily limit of 999 E. coli particles per 100 milliliters of lake water, they have been high enough at both beaches to exceed the average, or geometric mean, of 126 particles over the previous 30 days of testing. Beach 6's geometric mean was 146 on July 11, while Beach 8's was 127.8, Greene said. "One good (testing) day could bring them down and allow us to lift the restrictions," Greene said. The issue most days has been that one of the three daily samples taken at each beach has been high, which increases the beach's average. After a storm passes, the amount of E. coli in all three samples is usually elevated. Some days a sample taken from the edge of a beach's swimming section is high, while other times it's a sample taken from the middle, Greene said. Park officials are "crunching the numbers" to determine a reason for the high levels, Greene said. They are looking at several possible causes, including infrastructure problems and testing anomalies. More: Swimming restricted for second straight day at two Presque Isle State Park beaches Though swimming is currently not allowed at the park's two most popular beaches, park officials do have alternatives. They have opened Beaches 1, 3, 7 and 10 for swimming in recent days, along with Beach 11, which is usually open for swimming. They might even open Beach 9 on weekends, Greene said. "The bathrooms at those beaches are already open, so we just make sure the lifeguard operations are ready at those beaches," Greene said. "Beaches 6 and 8 are centrally located, though, and they are where we have put in so much infrastructure. We don't like having restrictions at all, but certainly not at those two beaches." Contact David Bruce at dbruce@ Follow him on X @ETNBruce. This article originally appeared on Erie Times-News: No swimming at Presque Isle beaches still due to E. coli
Tom's Guide
3 days ago
- Tom's Guide
Filthy water bottle? Here's how to clean it the right way
I have a kitchen cupboard dedicated to the best water bottles, and I don't think my family is alone in our obsession with them. There's one for work, one for the gym, and one for days out. And every time I open the cupboard door, at least one water bottle tumbles out. While my water bottle cupboard could use a declutter, the bottles could also benefit from a deep clean. However, I get stuck on knowing the best way to clean the water bottles and then keeping them that way. So, I set myself the task of discovering the best way to clean a water bottle and maintain its cleanliness. A self-cleaning water bottle? Yes, that's right! The LARQ Bottle PureVis is a self-cleaning and insulated stainless steel water bottle with a UV water purifier. It sanitizes water and cleans the inner surface of the bottle by neutralizing bacteria such as E-coli. It either works at a touch of a button or self cleans every two hours. What's more, it offers double-wall vacuum insulation to keep your cold water chilled for 24 hours and hot for 12. I know that an unclean water bottle can be a health hazard, because every time you take a sip of water, or whatever concoction you prefer to drink, you are leaving behind bacteria. While it may seem easy to give your bottle a quick rinse through at the end of each day, it is simply not enough, even though it may look clean to the naked eye. Another major problem I have is preventing mold growth, whether inside the bottle itself, within the threads that secure the lid, or around the lid and mouthpiece. It's one nasty that needs to be banished. Mold has a fondness for warm and damp places where it will thrive and spread tiny spores into the air. It's considered a health hazard, so if you spot mold in your water bottle, you need to clean it out. But how do you spot it, as it's not always visible with the naked eye? Mold could be lurking in your water bottle if you notice an unpleasant musty smell, the water appears cloudy, you spot a residue or film on your water bottle, or the water tastes unpleasant. Get instant access to breaking news, the hottest reviews, great deals and helpful tips. If you notice any of these signs, be sure to give your water bottle a deep clean to remove mold. Top tip I always leave my water bottles lid-free, to prevent any moisture from being trapped inside and causing a build-up of mold. To avoid the buildup of mold and prevent contaminating your drinking water, wash your water bottle daily and ensure it dries completely. You don't need to give it a deep clean every day, but you should wash it in hot water and dish soap to remove any bacteria, especially around the mouthpiece. If cleaning isn't your thing, opt for a water bottle that is dishwasher safe. However, do check which rack it can be washed on, as it will probably have to be placed on the top rack. Another top tip is to look for a water bottle with a simple design. Check out the lid and mouthpiece. If it has lots of intricate parts, it will be more difficult to keep clean. So, look for a bottle with a wide mouth, such as the HydroFlask 24oz Wide Flex Straw Cap Bottle, currently reduced to $30 at Amazon. My son owns this bottle, and I'd buy it just for the funky logo alone! Smooth materials, such as stainless steel or BPA-free plastic, will also make your job easier. You can even enhance your cleaning prowess with a bottle featuring a UV light that does the cleaning for you, such as LARQ's Bottle PureVis, which is currently reduced in some colorways to $69 at Amazon. You simply press a button to activate the light and wait a few seconds for it to sanitize your water. Apart from investing in a water bottle that's easy to clean, you could try a drying rack designed specifically for water bottles. How about Kuppy's Silicone Bottle Drying Rack that's $19 at Amazon?
