How To Clean A Mattress Topper And Extend Its Lifespan
Whether your mattress topper needs a quick refresh or a deep clean, the step-by-step processes below ... More outline how to do so using common household products. ILLUSTRATION: FORBES / PHOTO: GETTY
It doesn't take much effort to make your mattress topper look as good as new, and common household cleaning products will get the job done: You'll want baking soda, a vacuum cleaner, soap and a damp towel on hand. Below, we detail step-by-step instructions that can help restore your mattress topper and prolong its life, plus some regular maintenance tips. You should also consider using a mattress protector to help keep your bed and topper safe from future spills and stains.
If you're targeting an isolated stain or spill on your mattress topper, follow the instructions below.
Step 1: Make a sudsy mixture using water and a dash of gentle soap (castile soap is recommended).
Step 2: Take a clean cloth and grab a heaping scoop of your soapy mixture.
Step 3: Dab the stained area with your cleaning solution.
Step 4: Dip a separate cloth in cold water and blot the stained area.
Step 5: Repeat steps three and four until the stain is removed.
Step 6: Dust baking soda over the affected area to soak up excess moisture and let it sit for at least eight hours.
Step 7: Vacuum the baking soda using a handheld vacuum or an appropriate nozzle attachment.
Vinegar can also be used as an alternative to dish soap to help combat tough spots. For even harsher stains like biofluids, consider an enzyme cleaner, which is widely available at most supermarkets and grocery stores, or a mixture of one part water and one part hydrogen peroxide (1:1). With that said, hydrogen peroxide should be used as a last resort because of its harsh, foam-damaging properties. How To Deep Clean Your Mattress Topper
You should give your mattress topper a regular cleaning at least twice a year, if not every three months. It may sound like an unappealing chore but it's actually light work.
Clean your mattress topper using simple household items like water, baking soda and a damp cloth. getty
Step 1: Place your bare topper on a clean, flat surface.
Step 2: Vacuum the surface of the topper using your appliance's detachable nozzle (or a handheld vacuum) to remove loose dirt and dander.
Step 3: Dust baking soda over the entire surface and let it sit for at least eight hours.
Step 4: Vacuum the topper to remove the baking soda.
Step 5: Flip and repeat steps 2 through 4 on the opposite side.
If you learn your topper is soiled and has passed the point of no return, consider investing in a new mattress topper that caters to your sleeping position, firmness preference and budget; our guide includes editor-approved picks for various types of sleepers. How To Maintain Your Mattress Topper
You can extend the lifespan of your mattress topper and prevent premature dips or sags with regular maintenance. Note that different materials require different care. Rotate the head of your mattress topper to the foot every six months to ensure even wear and tear. If your mattress is one solid layer, you can also flip it over when you rotate.
If your mattress topper is made with with feathers or down, fluff it on a weekly basis to keep its support structure intact.
Avoid soaking your mattress topper in too much water or liquid in order to prevent the foam from deforming or breaking down. In the case of a spill, use a cloth or towel to absorb excess liquid.
Keep bleach and other chemicals away from your mattress topper, as harsh cleaning materials can damage the topper and linger for a long period of time. Why Trust Forbes Vetted
Our mattress and sleep team at Forbes Vetted consists of tenured editors and writers who rely on their industry knowledge, extensive testing experience and expert insights to build a robust catalog of helpful sleep content. Our library of sleep guides includes topics ranging from the best mattresses for side sleepers and the best cooling mattress toppers to tips for a relaxing bedtime routine. McKenzie Dillon, author of this story, is a mattress and sleep editor with over six years of research and testing experience. She has a sleep science coach certification and knows what it takes to maintain a comfortable, supportive bed setup. Prior to Forbes Vetted, Dillon was a sleep editor at CNET and MySlumberYard.
All mattress and sleep stories are overseen by Bridget Chapman, senior mattress and sleep editor at Forbes Vetted. A seasoned professional in the sleep industry, she also has a sleep science coach certification and years of testing experience under her belt.
How Do You Clean A Mattress Topper Without Washing It?
Use a handheld vacuum or a nozzle attachment on your vacuum to remove loose particles, then sprinkle a layer of baking soda over the surface of your mattress topper. After letting it sit for at least eight hours, use your vacuum to remove the baking soda.
Can A Mattress Topper Be Put In The Washing Machine?
Most mattress toppers, like those made with memory foam, latex or poly foam, cannot be put in a washing machine because water in high quantities damages and deforms the foam. However, cotton or polyester mattress pads and toppers may be machine washable. Always be sure to check your topper's care instructions.
How Do I Get Stains Out Of My Mattress Topper?
1. Create a mixture of water with gentle soap, vinegar or hydrogen peroxide, depending on the severity of the stain.
2. Alternate blotting the stain with your cleaning solution and a damp cloth dipped in cold water.
3. Repeat these steps until you remove the stain.
4. Cover the affected area with baking soda to soak up excess moisture and leave for eight hours. Vacuum up the baking soda when finished.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Fox News
18 minutes ago
- Fox News
Air traffic controller should have warned plane of Army helicopter's path ahead of fatal DC crash: FAA
An air traffic controller failed to notify the crew of a commercial plane that an Army helicopter was moving toward the aircraft before the collision in Washington, D.C., in January that killed 67 people, a Federal Aviation Administration official said on Thursday. The FAA's first acknowledgment of a possible error in the control tower at Ronald Reagan National Airport just before the fatal collision came on the second day of National Transportation Safety Board hearings looking into what led to the midair crash. Officials testified at the hearing about a high number of takeoffs and landings at the airport that, in addition to heavy helicopter traffic, led to air traffic controllers testing the limits of safety, according to The Washington Post. Among the methods used the night of the crash were the frequent use of allowing helicopter crews to use their own judgment and skills to avoid other air traffic and the use of runway 33, which is shorter and requires jets arriving from the south to leave the usual flight path and travel further east, the outlet noted. The controller responsible for guiding the flights of the Black Hawk helicopter and American Airlines jet arriving from Wichita, Kansas, had juggled communications with 21 different aircraft in the 10 minutes before the collision over the Potomac River, according to NTSB chairwoman Jennifer Homendy. NTSB investigators were told by the controller — managing helicopter and airliner traffic at once — that he felt overwhelmed about 15 minutes before the crash, but that traffic later died down some, and he felt more comfortable managing the workload. During the hearing, Homendy pressed FAA officials about the sequence of communications with the jet arriving, which was operated by regional carrier PSA, according to The Washington Post. "Should the local controller have let the PSA crew know there was a helicopter there?" Homendy asked. Nick Fuller, the acting number two ranking official in the FAA's air traffic control branch, answered yes, adding that the controller should have told the airliner's crew that the helicopter was using visual separation and that "the targets were likely to merge." The airport often saw nearly 80 departures and arrivals an hour, according to The Washington Post, citing an FAA email released by the NTSB this week. Clark Allen, the operations manager in the airport's tower on the night of the crash, was asked Thursday whether tactics that controllers used were jeopardizing safety. "They're pushing the line," Allen testified. Controllers told investigators that they did not feel outside pressure to keep up with the pace, but FAA managers described how American Airlines had a tight schedule that effectively boosted traffic. A manager for the airline testified that it had attempted to make changes after visiting the tower. In the minutes before the crash, the controller was looking for pilots willing to land on runway 33 to relieve pressure on the main runway. One crew declined and the pilots of the American Airlines flight from Wichita initially hesitated before agreeing, according to a transcript released this week, The Washington Post noted. This sent them on a circling route that would bring them directly into the path of the Black Hawk, which was using a route that passed right under the plane's landing path. Officials said the tactics of managing heavy aircraft traffic have tower jargon, including "squeeze play," which involves pushing planes through takeoffs and landings with minimal separation. "It can be taxing on a person, you know, constantly have to give, give, give or a push, push, push in order to efficiently move traffic," Allen testified. "Being a high volume, high complex airport with not a lot of real estate, you have to keep things moving," he added. The pressure at the airport extended to a nearby air traffic control facility that tees up planes to land, Bryan Lehman, a manager at that facility, testified on Thursday. "We have many nonstandard tools that we use in order to be able to bring a significant amount of airplanes into DCA … on a daily basis to make it work," Lehman said. "At a certain point, it's too much." Planes approaching the airport from the south mostly land on runway one, which is close to 7,200 feet long and able to accommodate the large airliners common at the airport. Runway 33, which is only 5,200 feet long, crosses it at an angle. Runway 33 is available to controllers as a form of relief valve. After the incident on Jan. 29, the FAA reduced the arrival rate of aircraft and said it would conduct a review. The agency said the current maximum arrival rate at the airport is 30 an hour. Lehman said he told investigators that American Airlines also found a way to avoid limits on the number of flights each hour by packing them into 30-minute blocks. "No one will stop them," Lehman said. "So, I don't know how American has this much pull … but it's a wink-wink, that people know what's going on." Njuen Chendi, the FAA's traffic management officer for the Washington district, told investigators that efforts to have the airline space out its flights to ease pressure on the airport have had only limited success. Eric Silverman, an American Airlines manager, testified on Thursday that representatives from the carrier had visited the tower as travel was rebounding from the COVID-19 pandemic. "We made changes where we could," Silverman said. Another tactic for managing traffic that also contributed to the crash was controllers' relying on visual separation, in which helicopters see and avoid airliners. "Visual separation was used on a daily basis between the helicopter operators and the commercial traffic departing and landing at DCA," Allen testified. "Visual separation was paramount to making the operation work efficiently for the amount of volume and complexity that the airspace has." The controller checked with the helicopter crew to confirm they could see the jet as they approached, but they appeared to be confused about the message and did not see the airliner even moments before they crashed into it. The FAA imposed limits on the use of visual separation in the aftermath of the collision. Staffing at the airport has been a problem since the crash, according to NTSB investigator Brian Soper, who said that the latest FAA data shows that while there are 26 controllers assigned to the tower, only 19 are available to work. "Every person we spoke with cited staffing as a significant concern," Soper said.
Associated Press
26 minutes ago
- Associated Press
Middle East expert looks into implications of Palestinian State recognition by various countries
The Associated Press is an independent global news organization dedicated to factual reporting. Founded in 1846, AP today remains the most trusted source of fast, accurate, unbiased news in all formats and the essential provider of the technology and services vital to the news business. More than half the world's population sees AP journalism every day.
Associated Press
27 minutes ago
- Associated Press
New world record announced for single flash of lightning in USA
The Associated Press is an independent global news organization dedicated to factual reporting. Founded in 1846, AP today remains the most trusted source of fast, accurate, unbiased news in all formats and the essential provider of the technology and services vital to the news business. More than half the world's population sees AP journalism every day.
