Amidst rising water tanker prices, BWSSB launches Sanchari Cauvery initiative
Deputy Chief Minister and Bengaluru Development Minister D.K. Shivakumar, who launched the Kaveri on Wheels app on Friday, said the it was brought to control the 'water tanker mafia'.
'This water tanker mafia has drilled over 3,000 borewells and have been fleecing people up to ₹3,000 per load of water. We have started this initiative to curb this. Bengaluru is the first city in the country to provide BIS certified drinking water from a river in tankers,' he said.
BWSSB has roped in 250 water tankers and established 55 Cauvery Connect Centres, essentially large water tankers, mostly in the outer zones to run the initiative, said Ram Prasath Manohar, chairman, BWSSB. He also said the board has launched the dedicated app and a website for citizens to book water tankers. 'Customers can book water tankers, make the payment, and track the tankers on the app. Water will be delivered within 24 hours,' he said.
Details of the tanker and the driver will also be shared, and a helpline will be available for grievance redressal, he added.
The cost of a 12,000-litre tanker load of water supplied by BWSSB will be ₹1,290, within a 2-km radius and ₹70 a km thereafter.
Residents of the outer zones still dependent on water tankers lament that it has been launched only as the summer is drawing to a close and the monsoon will set in less than three weeks. 'This is a great initiative, the decision for which was taken when the crisis was at its peak. But by the time it has been implemented, the summer is almost drawing to a close,' said Jagadish Reddy of Varthur Rising.
However, BWSSB sources said that this would not be limited to the summer alone and will be a permanent programme.
Meanwhile, the prices of water tankers in the city have crossed the ₹1,500 and ₹1,700 mark for a tanker load of 12,000 litres in areas where apartments are still to get water connections under Cauvery V Stage.
A businessman who runs a fleet of water tankers in Mahadevapura zone, who did not wish to be named, said that with the Cauvery V Stage, the demand had indeed fallen in some pockets and that had hit the overall business of water tankers.
'We have a few pockets and apartments who still have contracts with us. Meanwhile, groundwater levels have been depleting, and diesel prices increased this summer sending the costs of extracting and transporting groundwater northwards. Given that we also have lost customers this summer, we are forced to jack up prices and recover our costs from the existing customer base,' he said.
Sarala Cauvery EMI option for Cauvery connections
Bangalore Water Supply and Sewerage Board (BWSSB) also launched Sarala Cauvery, an initiative where residents get an option to pay the charges to get a connection in 12 EMIs, on Friday.
While apartment complexes can make a down payment of 20% of the total charges initially and pay the rest in 12 EMIs, connections for houses less than 600 sq. ft, mostly the urban poor, can get a new connection by paying just ₹1,000 and pay the rest in 12 EMIs.
'This initiative is designed to support the urban poor, middle-class families, and apartment communities,' Deputy Chief Minister and Bengaluru Development Minister D.K. Shivakumar said.
₹100 crore set aside for Cauvery Aarti at KRS
Deputy Chief Minister and Bengaluru Development Minister D. K. Shivakumar said the Water Resources Department had set aside ₹100 crore to conduct Cauvery Aarti, on the lines of Ganga Aarti at Krishnaraja Sagar. 'We have formed a committee, including Departments of Kannada and Culture, Tourism and Muzrai Departments, and BWSSB chairman Ram Prasath Manohar who successfully conducted Cauvery Aarti at Sankey Tank in Bengaluru has been appointed its chairman,' he said.
Sources said that the government was planning to make seating arrangements for 10,000 people at the venue and the event will likely be held during Dasara celebrations later this year. The programme has drawn criticism from multiple quarters, including Peoples' Union of Civil Liberties Karnataka, who have said the money should be instead used to clear the river of pollution.
Meanwhile, Mr. Shivakumar brushed aside opposition to the ₹1,900 crore project to fill tanks in Nelamangala with treated water from the Vrishabhavathi Valley, for which he laid the foundation stone on Thursday. He said the project had been successful in Kolar and the water will further get purified when it steeps into the ground and recharge the groundwater level. He also said those opposing the project were not farmers.
No tourists at dams
Deputy Chief Minister and Bengaluru Development Minister D.K. Shivakumar said the State government has not only tightened security at all dams in the State, but had also banned tourists visiting any dams. 'Only technical personnel will be allowed near dams till further orders. This is a matter of national security and people must cooperate,' he said.
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Indian Express
a day ago
- Indian Express
From timber troubles to thin MDF: What Greenpanel's FY25 results signal for investors
For many retail investors, Greenpanel Industries has been a familiar name on the stock ticker, one that once rode a strong uptrend. After listing in 2019, the company's share price steadily climbed, peaking above Rs 600 in mid-2022, supported by a wave of optimism around India's growing furniture and interior markets. Investors bet big on Greenpanel's leadership in medium-density fibreboard (MDF) and its vision to modernise the wood panel industry. However, as the stock price chart shows, the journey since then has been bumpy. Rising timber costs, intense competition, and shifting regulations took the shine off, pushing the stock below Rs 250 earlier this year before a mild recovery toward Rs 300 levels today. Against this backdrop, Greenpanel's FY25 results come at a crucial time. The company is transitioning: scaling up a new thin MDF capacity, navigating reduced imports, and preparing for stricter quality norms under BIS standards from 2026. While headline numbers show weaker volumes and lower profits, the story lies in how Greenpanel is positioning itself for the next growth phase and whether the recent stock rebound has further legs or remains fragile. Business and financial performance: Detailed breakdown Greenpanel Industries has two main revenue segments: MDF and plywood. Among these, MDF contributes about 90 per cent of the total revenue and remains the foundation of the company's business strategy. Plywood, though smaller, offers additional diversification. MDF segment: The core business facing headwinds MDF is Greenpanel's most important business, but it faced significant challenges in FY25. Overall, MDF sales volumes dropped by about 10 per cent compared to FY24. The decline was mainly because the company stopped selling lower-grade commercial MDF in anticipation of new Bureau of Indian Standards (BIS) quality regulations that will become mandatory from February 2026. In the fourth quarter alone, there were no sales of commercial-grade MDF, whereas the same quarter last year had about 41,000 cubic metres from this category. At the same time, exports of MDF increased by 17 per cent for the full year and by 34 per cent in the fourth quarter. However, export sales come at lower realisations than domestic sales. In Q4 FY25, export realisations were around Rs 22,400 per cubic metre, while domestic realisations were approximately Rs 31,200 per cubic metre. This difference in price impacted overall blended realisations. The overall revenue from MDF in FY25 fell to Rs 1,260 crore from Rs 1,400 crore in FY24, a decline of about 10 per cent. More importantly, the MDF segment's profit before interest and tax (EBIT) margin dropped sharply to 5.8 per cent in FY25 from 14.2 per cent in FY24. A key reason for the margin pressure was a nearly 23 per cent increase in timber prices during the year. Higher raw material costs combined with lower volumes and realisations created a difficult environment for the MDF segment. The company also received a one-time EPCG (Export Promotion Capital Goods) incentive of Rs 35 crore, which provided temporary support to margins. Without this incentive, segment profitability would have been even weaker. Plywood segment: Small but steadier The plywood business recorded a 15 per cent decline in volumes during FY25. Revenue also fell by about 17 per cent to Rs 135 crore compared to Rs 162 crore in FY24. However, average realisations improved by about 8 per cent in the fourth quarter, which helped offset some of the volume loss. Segment profit margin (EBITDA) increased to about 4 per cent in FY25, up from negative 1 per cent the previous year. This improvement came from disciplined cost management and the write-back of provisions for turnover discounts at the year-end. The company focused more on profitability rather than chasing higher volumes in this segment. Debt position and working capital analysis Net debt stood at Rs 165 crore at the end of FY25. This includes Rs 36 crore of debt related to the new thin MDF capacity expansion at Andhra Pradesh. Net working capital days increased to 36 from 28 in FY24, reflecting higher inventory and slower movement of goods in a challenging market environment. Depreciation charges were around Rs 100-102 crore, consistent with new plant additions. Strategic capacity expansion: Thin MDF line One of the most important strategic steps in FY25 was the commissioning of the new thin MDF line in Andhra Pradesh. This new capacity focuses on thinner panels (1.5-5.5 mm), which are widely used in furniture and interior applications. Previously, a large part of the thin MDF demand in India was met by imports, which had higher logistical costs and were affected by recent policy changes. For FY26, the company expects about 72,000 to 84,000 cubic metres of production from this new line. Management also expects around 10-12 per cent volume growth from the existing MDF plants. Combining these, Greenpanel is targeting a nearly 30 per cent increase in MDF volumes in FY26. This new capacity gives Greenpanel the opportunity to capture demand that was earlier served by imports. It also strengthens the company's product mix by adding higher value products and helps reduce dependence on low-margin exports. This move is expected to improve scale and profitability gradually as utilisation ramps up. Outlook and conclusion Greenpanel enters FY26 at a crucial point. After a tough FY25, the company aims to recover through volume growth and better margins. Management expects around 30 per cent growth in MDF volumes, driven by higher output from existing lines and the ramp-up of the new thin MDF plant. Margins are expected to stabilise around 12 per cent for MDF and 7-8 per cent for plywood, supported by an expected decline in timber prices by about 5-7 per cent. The BIS quality standards set to come into effect in 2026 will likely benefit organised players like Greenpanel, as smaller and unorganised producers struggle to meet compliance. Financially, the balance sheet remains moderate despite higher net debt at Rs 165 crore due to expansion. With major capital expenditure largely completed, the company plans to focus on improving utilisation and cash flows. Key risks include strong price competition, delays in the new line ramp-up, and unexpected swings in timber prices. In short, FY26 will be a test of execution. If Greenpanel manages to meet its growth and margin targets, it could start regaining investor confidence. The next few quarters will be important for investors to watch closely. Note: This article relies on data from annual and industry reports. We have used our assumptions for forecasting. Parth Parikh has over a decade of experience in finance and research and currently heads the growth and content vertical at Finsire. He holds an FRM Charter and an MBA in Finance from Narsee Monjee Institute of Management Studies. Disclosure: The writer and his dependents do not hold the stocks discussed in this article. The website managers, its employee(s), and contributors/writers/authors of articles have or may have an outstanding buy or sell position or holding in the securities, options on securities or other related investments of issuers and/or companies discussed therein. The content of the articles and the interpretation of data are solely the personal views of the contributors/ writers/authors. Investors must make their own investment decisions based on their specific objectives, resources and only after consulting such independent advisors as may be necessary.
Hans India
2 days ago
- Hans India
Govt issues clarification on Quality Control Order for steel products
New Delhi: The Ministry of Steel clarified on Wednesday that it has issued Quality Control Orders for the enforcement of 151 BIS Standards. The last Quality Control Order was issued in August 2024, and no new Quality Control Order has been issued since then. The ministry made it clear that its order dated June 13 is merely to clarify that in the case of intermediate material for manufacturing of final products under BIS Standards, steel products will also have to follow BIS Standards prescribed for such intermediate products. The Ministry made it clear that no new Quality Control Orders have been issued, and the order on June 13 was necessary to bring parity between importers and domestic producers of steel. Presently, the import of finished steel products is not at par with Indian manufacturers of finished steel products, as Indian steel products manufacturers have to use only BIS Standard-compliant intermediate material, while no such requirement was felt by importers for the import of steel products. It will be wrong to put domestic steel products manufacturers at a comparative disadvantage vis-à-vis imported products in terms of non-BIS-compliant intermediate input products. The order will also help to ensure compliance with BIS Standards for intermediate products is required to ensure that the finished product is as per the quality requirement given by BIS Standards. If this is not done, a final product may be sub-standard. For example, a large quantity of coated steel is imported into India. Coated steel uses HR/CR Coil as base material, which is the main product in this case. If HR/CR Coil is not BIS compliant, coated steel cannot be BIS compliant, even if the coating process is itself BIS compliant, according to the statement. Besides, the order is also aimed at checking the possibility of the import of substandard steel. Because of excess capacity and declining consumption in certain countries, there is a big possibility of the dumping of substandard steel. As India is the only fast-growing large economy in the world, there is a very high possibility of cheap steel getting pushed into the Indian market unless adequate measures are put in place for the import of quality steel. It is to be noted that if intermediate inputs (which form the core of finished products like HR coil, CR coil or coated steel) are not BIS compliant and are substandard, the final product cannot be BIS compliant, the Ministry's statement said. The statement further highlighted that Integrated Steel Plants, which make intermediate products and finished products themselves, and the BIS licence has been issued to them, taking into account the whole process, will not need to have different licences for all stages, as the BIS certification process takes care of the whole manufacturing chain. The Ministry of Steel will issue clarifications in this regard after verification from BIS for such integrated steel plants. It further states that apprehension of the possibility of a price rise due to the June 13 order issued by the Ministry of Steel is unfounded. India has a steel manufacturing capacity of 200 million tonnes, which is enough to meet domestic demand. Hence, no such possibility of price increase seems to be there. The Ministry's statement also pointed out that many countries have imposed safeguard duties and measures to prevent the import of cheap steel from the international market, such imposition of sectoral tariffs, Tariff Rate Quotas (TRQs), etc. Because of these safeguard measures adopted by other countries, the possibility of dumping of cheap substandard steel into India further increases. If this happens, this will have an extreme adverse impact on the domestic steel industry and especially the small steel industries in the country. This will also lead to the possibility of the loss of employment of lakhs of people. India is the only major economy where steel consumption has grown at above 12 per cent for the last three years. On the contrary, the steel consumption in other geographies is either stagnant or declining. This fast growth in steel consumption is due to the Indian government's push on infrastructure strengthening, public and private sector development in buildings and real estate and growing manufacturing of capital goods in the country. To cater to this steel demand, the country will need about 300 MT steel capacity by 2030 and 400 MT of steel capacity by 2035. This capacity creation will require a capital infusion of approximately $200 billion by 2035. If substandard cheap steel imports affect the domestic steel industry (both integrated steel producers and small steel industries), their capacity to infuse this capital will come into terrible strain, and the capacity expansion plans of the steel industry will be adversely affected, the statement added.
&w=3840&q=100)
Business Standard
3 days ago
- Business Standard
Standards & QCOs: A strategic lever for Viksit Bharat manufacturing agenda
Prime Minister, in his Independence Day address in 2014, urged the industry, especially MSMEs of India, to manufacture goods in the country with "zero defects" and to ensure that the goods have "zero effect" on the environment (ZED). The revised BIS Act was promulgated in 2016, providing stronger legal backing to bring under compulsory certification regime any goods or article of any scheduled industry, process, system or service which the government considers necessary in the public interest or for the protection of human, animal or plant health, safety of the environment, prevention of unfair trade practices, or national security. The intent was clear — as we move towards Viksit Bharat, the government wants to raise the quality bar in the domestic market and eventually for exports. In the last few years, we have seen enactment of regulations by the Government of India that 'raised the floor' by imposing a minimum quality standard on all producers selling in the domestic market. A total of 187 Quality Control Orders (QCOs), covering 769 products, have been notified for compulsory BIS certification by various regulators and line ministries of the Government of India. Industry is fast catching up to comply with these regulations. Notwithstanding some teething issues in the implementation of these QCOs, they have to be a key pillar of India's industrial growth strategy. They are now emerging as strategic tools to strengthen India's manufacturing ecosystem, ensure consumer safety, and build global trust in Indian-made goods. The government has been systematically expanding the QCO regime across sectors to curb substandard imports, safeguard consumer interests, and foster a robust, quality-conscious manufacturing ecosystem without any major disruptions in the supply chain. The government has adopted a consultative and collaborative approach to the formulation and implementation of QCOs, with an emphasis on active industry engagement. Reflecting the government's sensitivity to industry readiness, especially for MSMEs, several QCOs have been notified with phased implementation timelines and given due extensions as well. The government is also undertaking concerted efforts to strengthen testing infrastructure, streamline certification processes, and extend capacity-building support. Developed countries have long used technical regulations as tools, inter alia, to shape global trade dynamics. For many decades, India and other developing countries sought special and differential treatment for their exports to comply with such high — and often arbitrary — standards of the developed world, but to no avail. India's strategic use of QCOs reflects a shift from being a passive consumer market to an assertive, quality-focused manufacturing economy. Going forward, India must move from being an adaptor of international standards to a developer of these standards in international foras. Countries such as the Republic of Korea and, more recently, China have shifted from marginally participating in international standards-setting organisations such as the ISO or the IEC to chairing some of their working groups and developing an increasing number of standards. The time is now for India to set the standards on the world stage. The author is the Director General of FICCI
