New Chevy Corvette ZR1 Can't Stop Breaking Records
Chevrolet's upcoming C8 Corvette ZR1 has raised the performance bar yet again, setting lap records at five different race tracks across the United States. The supercharged sports car, the most powerful Corvette ever built, continues to redefine American performance standards.
The automaker confirmed that a pre-production ZR1, equipped with the ZTK Performance Package, conquered top-tier circuits with new record times, showcasing its blistering speed and precision engineering. Four Chevrolet engineers piloted the vehicle across the five courses, each securing a new fastest lap.
Bill Wise, Chevy's lead performance engineer, kicked off the record spree at Watkins Glen International in New York, where he completed the long course in 1:52.6. Brian Wallace, lead vehicle dynamics engineer, followed with a 2:08.6 run at Wisconsin's Road America. Development engineer Chris Barber then made headlines with a 1:22.8 lap at Road Atlanta. The final two records were set by global vehicle performance manager Aaron Link, who conquered Virginia International Raceway's full course in 1:47.7 and the grand course in 2:32.3.
'We knew the car had the capability, but breaking these records confirmed just how far we've pushed the C8 ZR1,' Barber said. 'It wasn't just about beating the times—it was about obliterating them.'
Powered by a 5.5-liter twin-turbocharged flat-plane-crank V-8, the ZR1 boasts an astounding 1,064 horsepower and a top speed of 233 mph, making it the fastest production Corvette ever. The ZTK package further enhances performance with a high-downforce rear wing and advanced aerodynamic elements.
Production of the C8 ZR1 is set to begin this spring, with deliveries expected later this year. The model will start at $174,995, cementing its place as a premier supercar contender.
Follow us on Facebook and Twitter
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
3 hours ago
- Yahoo
The 2025 Corvette ZR1 May Be Even More Rare Than We First Thought
Chevrolet's Corvette ZR1 is a revolution for American sports cars, packing power and performance figures that not long ago were the province of foreign exotica — but a new report indicates that the first batch to roll off the line for the 2025 model year may arrive in even more limited numbers than we first suspected. According to CorvetteBlogger, Chevrolet's model year swap between 2025 and 2026 Corvettes is scheduled to take place on August 4 —which means the company has a little over a month to churn out the MY25 ZR1s. But while General Motors reportedly has taken 310 orders into its system for the 1064-hp twin-turbo 'Vette, all for its inaugural model year, a mere 65 units have reportedly been built since production kicked off at the end of April. Further complicating matters: the Corvette's storied Bowling Green, Kentucky, plant is set to close for a summer break after Friday, July 4, and won't re-open until July 14. That leaves UAW workers in Kentucky just 15 days to build more than 240 Corvette ZR1s, a feat that Chevrolet, reportedly, doesn't believe is possible. At least, that's what the automaker signaled to dealers according to an email CorvetteBlogger says it obtained. The email reportedly states that the automaker cannot commit to building all 310 units in the order system in that time, and that any 2025 ZR1 orders that are at 3000 Status (signifying the order has been accepted by production control) or below will need to be resubmitted as 2026 model year orders. There's independent evidence to back this up, too. Corvette enthusiast and data mapper Roger Kiel has taken it upon himself to track the production of the C8-generation Corvette and posting his findings in Corvette-dedicated Facebook groups; the latest version shows an average daily production rate of two or three ZR1 units each day. This indicates that around 100 ZR1 units are likely to be built by the time of the model year switchover in early August. So, what's the big deal? Well, in addition to a revamped interior design, the new model carries a $7200 price bump versus 2025 model year ZR1s, in addition to a destination fee increase of $100. Another added complication is the way ZR1 allocations flow. One order cycle of the 2026 model year C8 Corvette has already come and gone, but no ZR1 units were reportedly allocated — hence why all 300-ish orders taken so far have been for MY25 cars. That means these ousted ZR1 buyers will have to wait for the next order cycle, and hope that it winds up offering some slots for the new hypercar-slaying C8. Clearly, C8 ZR1 production is still in its infancy, and prospective buyers will have to adjust their expectations accordingly. However, the transparent amount of performance on tap and the degree of American engineering pride exemplified by the ZR1 leads us to suspect most buyers will be more than willing to wait a little longer than they originally planned if that's the price for owning a 233-mph stock Corvette. You Might Also Like You Need a Torque Wrench in Your Toolbox Tested: Best Car Interior Cleaners The Man Who Signs Every Car
Yahoo
3 hours ago
- Yahoo
The 2025 Corvette ZR1 May Be Even More Rare Than We First Thought
Chevrolet's Corvette ZR1 is a revolution for American sports cars, packing power and performance figures that not long ago were the province of foreign exotica — but a new report indicates that the first batch to roll off the line for the 2025 model year may arrive in even more limited numbers than we first suspected. According to CorvetteBlogger, Chevrolet's model year swap between 2025 and 2026 Corvettes is scheduled to take place on August 4 —which means the company has a little over a month to churn out the MY25 ZR1s. But while General Motors reportedly has taken 310 orders into its system for the 1064-hp twin-turbo 'Vette, all for its inaugural model year, a mere 65 units have reportedly been built since production kicked off at the end of April. Further complicating matters: the Corvette's storied Bowling Green, Kentucky, plant is set to close for a summer break after Friday, July 4, and won't re-open until July 14. That leaves UAW workers in Kentucky just 15 days to build more than 240 Corvette ZR1s, a feat that Chevrolet, reportedly, doesn't believe is possible. At least, that's what the automaker signaled to dealers according to an email CorvetteBlogger says it obtained. The email reportedly states that the automaker cannot commit to building all 310 units in the order system in that time, and that any 2025 ZR1 orders that are at 3000 Status (signifying the order has been accepted by production control) or below will need to be resubmitted as 2026 model year orders. There's independent evidence to back this up, too. Corvette enthusiast and data mapper Roger Kiel has taken it upon himself to track the production of the C8-generation Corvette and posting his findings in Corvette-dedicated Facebook groups; the latest version shows an average daily production rate of two or three ZR1 units each day. This indicates that around 100 ZR1 units are likely to be built by the time of the model year switchover in early August. So, what's the big deal? Well, in addition to a revamped interior design, the new model carries a $7200 price bump versus 2025 model year ZR1s, in addition to a destination fee increase of $100. Another added complication is the way ZR1 allocations flow. One order cycle of the 2026 model year C8 Corvette has already come and gone, but no ZR1 units were reportedly allocated — hence why all 300-ish orders taken so far have been for MY25 cars. That means these ousted ZR1 buyers will have to wait for the next order cycle, and hope that it winds up offering some slots for the new hypercar-slaying C8. Clearly, C8 ZR1 production is still in its infancy, and prospective buyers will have to adjust their expectations accordingly. However, the transparent amount of performance on tap and the degree of American engineering pride exemplified by the ZR1 leads us to suspect most buyers will be more than willing to wait a little longer than they originally planned if that's the price for owning a 233-mph stock Corvette. You Might Also Like You Need a Torque Wrench in Your Toolbox Tested: Best Car Interior Cleaners The Man Who Signs Every Car
Car and Driver
5 hours ago
- Car and Driver
From the Archive: 1977 Mazda GLC Drive
From the February 1977 issue of Car and Driver. Mazda has just announced a new subcompact hatchback sedan called the GLC, but before you start looking for hidden meaning in the GLC name, you may as well know that there isn't any. It's just a collection of letters, and you're free to read into it whatever you will. However, Mazda suggests Great Little Car. So much for modesty. The GLC is a conventional front-engine, rear-wheel-drive sedan. In specifications, it is very similar to a Chevy Chevette. In real life, it seems much better. Externally, it looks like a Chevette that has started to dissolve. The Chevrolet's sharp edges are replaced with soft curves. Nowhere on the GLC will you find the over-decoration that has become a trademark of Japanese cars. View Photos Patrick Bedard | Car and Driver While the GLC's shape is that of the Chevette, its dimensions vary only slightly—4.3 inches shorter than the Chevette, 3.2 inches less wheelbase, 1.4 inches wider—and it seems a happier compromise. The extra width makes the interior less cramped, the lower beltline gives the passenger compartment an airy feeling, and typical of Mazda, the front seats have an adjustment range of 6.3 inches, which gets you far enough away from the wheel to think you're in a far bigger car. View Photos Patrick Bedard | Car and Driver The GLC is Mazda's economy car and is therefore not scheduled to have a rotary engine. A 1300 cc four-cylinder is the only choice, but you can back it up with a four-speed manual, five-speed manual, or three-speed automatic transmission. Our driving impression was based on a brief fling in pre-production models at Mazda's Miyoshi proving ground in Japan. In that session, the GLC was a real charmer. It's roomy, the ride is comfortable, and the car's behavior is so predictable you get the feeling you've driven it before. The five-speed is crisp, and the pedals are perfect for heel-and-toeing. Mazda plans to bring the base GLC into the U.S. for less than $3000. At that price, it really is a great little car. View Photos Patrick Bedard | Car and Driver Specifications Specifications 1977 Mazda GLC Vehicle Type: front-engine, rear-wheel-drive, 4-passenger, 2-door hatchback PRICE (EST) Base: $2900 ENGINE SOHC inline-4, iron block and aluminum heads Displacement (est): 78 in3, 1273 cm3 Power (est): 52 hp @ 5000 rpm TRANSMISSION 4-speed manual DIMENSIONS Wheelbase: 91.1 in Length: 154.3 in Curb Weight (C/D est): 1965 lb
