I-494, I-35W closing for construction this weekend
Interstate 494 and Interstate 35W will be closed Friday, June 27 through Monday morning, June 30.
Eastbound I-494 will be closed between Highway 100 and I-35W, and westbound I-494 will be closed between Highway 77 and Highway 100.
I-35W will be closed in both directions between I-494 and Highway 62.
(FOX 9) - Interstate 494 and Interstate 35W will be closed this weekend as construction continues in the area.
The closure is set to start at 10 p.m. Friday, June 27, and will go until 5 a.m. Monday, June 30.
What we know
The Minnesota Department of Transportation (MnDOT) says that eastbound I-494 will be closed between Highway 100 and I-35W.
The detour for this closure is taking northbound Highway 100 to eastbound Highway 62 to southbound Highway 77 to eastbound I-494.
Here's the map of the detour:
Westbound I-494 will close between Highway 77 and Highway 100.
The detour will take you from northbound Highway 77 to westbound Highway 62 to southbound Highway 100 to westbound I-494.
Here's the map of the detour:
Dig deeper
MnDOT says that I-35W will be closed in both directions between I-494 and Highway 62.
There are two detours for this closure, for northbound and southbound I-35W.
Northbound I-35W detour
Take this detour if you are traveling on northbound I-35W: Take eastbound I-494 to northbound Highway 77 to westbound Highway 62 to northbound I-35W.
Here is the map for that detour:
Southbound I-35W detour
Take this detour if you are traveling on southbound I-35W: Take eastbound Highway 62 to southbound Highway 77 to southbound I-35E to southbound I-35W.
Here is the map for that detour:
For more information on the construction in Edina, Bloomington and Richfield on I-494, click here.
The Source
Minnesota Department of Transportation information page.
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Yahoo
10 minutes ago
- Yahoo
SINBON Doubles US Manufacturing Footprint to Meet Growing Demand in Industrial Robotics, Automotive, and Renewable Energy Sectors
CLAYTON, Ohio and TAIPEI, Aug. 4, 2025 /PRNewswire/ -- Leading electronics system integrator SINBON Electronics Co., Ltd. (TWSE#:3023) is announcing a new 59,000-square-foot facility in Clayton, Ohio, more than doubling its US manufacturing footprint. Backed by approximately $8.5 million in investment, the expansion into the revamped facility is expected to bring jobs to up to 200 total at the facility and enhance production for key US industries, including smart manufacturing, automotive, and renewable energy. The launch represents a major milestone in bolstering SINBON's innovation for US customers, regional supply chain resilience, and long-term regional presence. "As our US partners increasingly seek to onshore their supply chains, speed and proximity have never been more critical to manufacturing innovation for high-growth areas like robotics," commented Joy Wu, Vice President, Industrial Business Unit at SINBON. "By expanding right in the heartland of American industry, we can now help our customers innovate faster, solve complex production challenges locally, and strengthen supply chain security at a time when it matters most." Powering key US industries By bringing production closer to key customers, SINBON aims to enable more agile collaboration, particularly in the customization of products—a hallmark of its consultative approach to engineering and design. With a growing share of SINBON's customers requesting 'Made in America,' the new Clayton facility enables the company to fully cater to US customers across key high-growth areas. The top three are robotics and drones for smart manufacturing and logistics, solar energy hardware, and off-road vehicles. With cutting-edge equipment and capabilities, the facility will serve as a hub for development and production of advanced products and new product introduction (NPI). The new space will focus on medium-to-low volume, high-mix production, facilitating production of larger products with greater space and an improved layout. Key capabilities will include: Box build products: Across various electronics and industries General-to-complex and EV cable assembly: Optimized for both single-piece flow and batch production, supporting a wide range of volume and complexity Printed circuit board assembly (PCBA): Dedicated area with control for electrostatic discharge and climate — suited for sensitive products such as in medical and industrial applications Basing core US operations in Ohio The Clayton facility will serve as the hub in SINBON's network of warehouses in the US to streamline logistics and material flows, improving lead times and service for customers. It was completed in June 2025 and is scheduled to be fully operational by September 2025. Besides more than doubling in size, the new facility in Clayton will increase local jobs by up to 70% compared to the previous facility, which was in Vandalia. The company's US headquarters office is also located nearby in Tipp City. An extensive impact across US value chains SINBON's largest US customers are prominent players listed on major US stock exchanges, including a top global e-commerce company with a market capitalization exceeding US$1.5 trillion. As part of the company's extensive footprint across industries, its broader US customer base includes leaders in medical technology and solar energy hardware. SINBON has also recently entered the smart fishing space through a collaboration with a smart angling technology company. At the start of 2025 (January 10), SINBON Electronics had a market capitalization of approximately NT$62.90 billion on the Taiwan Stock Exchange. About SINBON Electronics Established in 1989 in Taiwan, SINBON Electronics is a leading provider of integrated design and production services for bespoke interconnect solutions. Driven by a commitment to customer centricity and the principles of ESG, the company offers a wide range of products and OEM/ODM services that ensure reliability and efficiency, combining extensive engineering expertise, industry knowledge, and leading innovations to customize solutions for long-term customer success. SINBON has a global footprint, with operations in Taiwan, China, Japan, the United Kingdom, Germany, Hungary, and the United States. For more information: View original content to download multimedia: SOURCE SINBON Electronics
Motor 1
11 minutes ago
- Motor 1
Florida Car Salesman Goes on Test Drive. Then He Gets $160 Ticket Because the Officer Doesn't Understand Magnets
Composite liftgates may be a design win for automakers, but for car dealers using magnetic tags during test drives, they're becoming a legal liability. A recent TikTok shows just how quickly the consequences can stack up when enforcement meets modern materials. Florida-based creator RobbTheCarGuy (@robbthecarguy) starts off the viral clip in a highly agitated state after receiving a $160 ticket for not displaying his magnetized dealer plate properly on a test drive. Robb details how a routine test drive turned into an unexpected confrontation with law enforcement. He says that while road-testing a Nissan Rogue, he was pulled over by a police officer who claimed the vehicle had no visible license plate. Robb tried to explain that the car was in the middle of dealer preparation and his magnet-mounted temporary tag was secured to the driver-side rear panel, which was the only surface with metal, since the vehicle's liftgate was entirely composite plastic. According to the TikToker's account, the officer was unmoved by the explanation and asked Robb why he didn't affix the magnetized plate to the windshield. The officer then tested whether the magnetic plate would stick to the glass, leaving Robb in shock. Then, frustrated that the tag did not adhere to the glass, the officer announced he was giving Robb a ticket. 'I get the ticket,' Robb says. 'Then, the guy tells me, 'Listen, you can't leave this parking lot until that tag is secured to the vehicle.' Bro, my shop is across the street. You could see it from here, and he waited till I unscrewed it, went inside, [and] bought some screws to screw it into the back.' Temporary Tag Placement Rules Laws around temporary or dealer-issued tags vary by state, but most have a few things in common: Clearly visible from the rear of the vehicle. Securely affixed in the standard license plate location —often defined as the space where a permanent plate would typically be mounted. Protected from obstruction or detachment , meaning resting loosely in the window, placed inside the vehicle, or affixed with insufficient strength, may be grounds for citation. In Florida, where Robb is based, the statutes are relatively straightforward. According to Florida Statute 320.131 , a temporary tag must be 'firmly attached to the rear of the vehicle in the location where a permanent license plate is normally affixed.' That language leaves little room for improvisation, which Robb learned the hard way. Other states use similar language. For instance, California requires temporary dealer plates to be 'securely attached to the rear of the vehicle in the place provided.' Most laws do not account for edge cases created by modern vehicle design. Many late-model vehicles, including SUVs and crossovers, now use composite liftgates or plastic rear panels, which do not support magnetized plates. But in the eyes of the law, material limitations are not considered valid exemptions. If a tag cannot be magnetically affixed to the designated area, drivers are still legally responsible for securing it with screws, adhesive mounts, or other compliant methods. Failure to comply can result in fines typically ranging from $100 to $200, and in some jurisdictions, officers have the discretion to bar further operation of the vehicle until the tag is mounted correctly. That includes demanding on-the-spot corrections, even if it means an impromptu trip to the hardware store. Why So Many Cars No Longer Have Metal Liftgates Automakers have increasingly shifted toward plastic or composite rear liftgates and panels to reduce weight and improve fuel economy. The 2014-present Nissan Rogue models, for example, often use composite materials on the rear hatch—a design choice that prevents magnetic tags from attaching. This trend isn't exclusive to Nissan. Industry reports show the trend toward the use of lightweight, non-metallic body materials has surged in recent years as original equipment manufacturers balance fuel efficiency regulations and production costs. These gains come with unintended consequences, like nowhere to put a magnetic tag on a test drive. If you're test-driving or selling a vehicle with a non-metallic liftgate, here are a few legal and practical ways to comply with display laws: Buy a suction-cup license plate holder designed for plastic bumpers and glass windows. Use adhesive-backed or Velcro tag mounts. There are also commercial adhesive tag brackets that stick to glass or smooth bumpers without screws. Invest in dealer-specific tag frames. Some dealers use clip-on mounts or frame kits designed for temporary use. The Auto Dealer Supply Store offers compliant kits for modern test-drive setups. Avoid dashboards or interior mounting, unless state-approved. Motor1 reached out to Robb via direct message. Now Trending 'I Only Go On Sundays:' Dealership Salesman Calls Out Customers for Saying 'I'm Just Looking' When He Approaches Them 'That's Definitely One Way to Do It:' Woman Says She Cried at the Mazda Dealership. Then They Gave Her the Price She Wanted Get the best news, reviews, columns, and more delivered straight to your inbox, daily. back Sign up For more information, read our Privacy Policy and Terms of Use . Share this Story Facebook X LinkedIn Flipboard Reddit WhatsApp E-Mail Got a tip for us? Email: tips@ Join the conversation ( )
Motor 1
15 minutes ago
- Motor 1
‘Cleaning My Car Out Today:' Texas Man Leaves Water Bottle in Jeep. Then it Causes Irreversible Damage
A man is going viral on TikTok after showing the damage caused to his car when he left his water bottle in it in the Texas heat. TikTok user Guero Navarrete (@gueronavarrete1) didn't share many specifics—like whether the bottle was plastic or glass, how long it sat in the sun, or exactly how hot it was outside—but the results were dramatic. In his video, he shows the inside of his Jeep, where the passenger side appears scorched, almost as if a small fire had broken out. 'That's what happens when you leave a water bottle in the front seat and the sun hits it just right and it acts like a magnifying glass,' Navarrete wrote in an on-screen caption. As of this writing, the clip has garnered over 433,900 views. Can This Really Happen? Yes, a water bottle—especially a plastic one—can explode or even spark a fire in a hot car. If the sun hits it just right, it can act like a magnifying glass , focusing heat onto something flammable, such as a seat or a piece of paper. Heat can also cause the liquid inside to expand, building pressure. If that pressure gets too high, the bottle can burst . There's also the issue of chemicals. When plastic bottles heat up, they can start to break down and leach substances into the water—something you probably don't want to drink. To avoid all that, don't leave plastic bottles sitting in the sun. Toss them in the trunk, cover them up, or use an insulated container instead. Stainless steel and glass bottles are also better options since they withstand heat better. What Else Should I Avoid? Water bottles aren't the only things that can turn dangerous in a hot car. During summer, it's crucial to avoid leaving certain items behind due to the extreme heat. According to Capital Insurance Group , aerosol cans, electronics, food and drinks, disposable lighters, medications, and anything containing batteries can all become serious hazards. Experts say aerosol cans can explode if left in direct sunlight or inside a sweltering car, since heat builds pressure inside the can. The same goes for lighters, which can leak or combust when exposed to extreme temperatures. Phones, laptops, and battery-powered electronics can overheat, get damaged, or, in some cases, catch fire. Sunscreen and other pressurized personal care products can also degrade or explode. Food and medicine spoil fast in high heat, and certain medications can become less effective or even dangerous. The short answer is that it's best to treat your car like an oven in the summer. If you wouldn't leave it in an oven, don't leave it on your seat. Commenters Make Note to Check on Their Cars Viewers who saw Navarrete's video took it as a cue to clean out their vehicles—especially in the middle of a brutal heatwave . 'Thank you for letting me know cleaning my car out today,' one said. 'To-do list: Clean out the car #1 water bottle,' another quipped. 'Running to my car now to get the millions of water bottles from my daughter,' added a third woman. Some suggested another way to avoid the problem altogether: Just shell out for tinted windows. 'My windows are too dark for that to happen,' shared one TikTok user. 'Get tint,' advised another. 'Why [does] nobody like tinting their windows anymore?' a third asked. Motor1 has reached out to Navarrete via TikTok direct message. Now Trending Woman Asks TikTok What's Wrong With Her Mini Cooper. Then a Mechanic in the Comments Figures It Out Just by Listening to a Sound 'I Just Bought It:' Woman Uses Groupon to Pay For Her Oil Change. Then the Mechanic Asks Her What Type of Car She Drives Get the best news, reviews, columns, and more delivered straight to your inbox, daily. back Sign up For more information, read our Privacy Policy and Terms of Use . Share this Story Facebook X LinkedIn Flipboard Reddit WhatsApp E-Mail Got a tip for us? Email: tips@ Join the conversation ( )
