logo
Canada's eVTOL firm makes history, becomes first to achieve full wing transition

Canada's eVTOL firm makes history, becomes first to achieve full wing transition

Yahoo19-05-2025
Canada-based aerospace engineering company Horizon Aircraft has hit a significant milestone by becoming the first eVTOL developer to achieve stable wing-borne flight transition with its large-scale prototype aircraft, Cavorite X7, using a fan-in-wing design.
The Cavorite X7 demonstrator is designed primarily as a conventional aircraft but with a unique twist—it can take off and land vertically like a helicopter, combining traditional fixed-wing performance with the versatility of eVTOL capability. The aircraft uses 14 fans embedded within its airframe—five in each main wing and two in each forward canard—to enable vertical takeoff and landing.
Horizon Aircraft developed a patented mechanism that cleverly allows the wing surfaces to slide open, exposing the battery-powered lift fans during vertical flight. As the aircraft transitions to forward flight, the wing surfaces close, turning it into a conventional fixed-wing aircraft powered by a gas turbine engine driving a rear push-propeller.
The patented fan-in-wing system builds on established technologies, using modern electric motors and batteries to power a next-generation eVTOL platform that prioritizes simplicity, safety, and efficiency.
Designed for real-world performance, the hybrid-electric Cavorite X7 is expected to reach cruising speeds of up to 250 mph and cover over 500 miles with fuel reserves, positioning it as a potential game-changer in the rapidly growing Regional Air Mobility (RAM) market.
"From the beginning, we have focused on innovations that make the most operational sense with the best available technology. We are looking forward to proving this next on our full-scale, piloted technical demonstrator that is currently under construction," said Brandon Robinson, CEO and co-founder of Horizon Aircraft, in a press release.
Blending science fiction with engineering, the Cavorite X7—named after the imaginary anti-gravity material in H.G. Wells' The First Men in the Moon—is built to carry six passengers and a pilot. With a maximum gross weight of 5,500 lbs, it can transport up to 1,500 lbs of cargo for vertical takeoffs, or 1,800 lbs when using a traditional runway.
Unlike most eVTOLs, the X7 is designed to function as a true hybrid aircraft and will be certified for both instrument (IFR) and visual (VFR) flight rules, allowing it to operate safely in all weather conditions. If certified, it would be the first aircraft of its kind to achieve such a rating.
According to Brian Robinson, chief engineer and co-founder of Horizon Aircraft, the latest milestone confirms the strength and effectiveness of their unique approach to managing the transition phase of flight.
"In our aircraft, the transition phase was designed from the beginning to be a non-event, as there are no complicated multi-copter rotating nacelles or heavy tilt-wing mechanisms, and we have multiple layers of redundancy. The result is an extremely safe and stable transition, a vital part of eVTOL operations, and an area in which many of our competitors have faced serious challenges," Robinson noted.
Orange background

Try Our AI Features

Explore what Daily8 AI can do for you:

Comments

No comments yet...

Related Articles

B.C.'s independent wood manufacturers decry retroactive U.S. softwood duties
B.C.'s independent wood manufacturers decry retroactive U.S. softwood duties

Yahoo

time13 minutes ago

  • Yahoo

B.C.'s independent wood manufacturers decry retroactive U.S. softwood duties

VANCOUVER — British Columbia's independent wood product makers say hundreds of small- and medium-sized manufacturers may be forced to shut down in light of the latest decision from the United States to raise anti-dumping duties on Canadian softwood. The province's Independent Wood Processors Association says in a release that the U.S. Commerce Department's decision this week to raise duties also includes a requirement for Canadian companies to retroactively remit duties for products shipped to the United States since Jan.1, 2023. Association chair Andy Rielly says in a statement that the requirement to pay duties on products shipped in the last 31 months could not only force small B.C. producers to shut down, but may also threaten operators' personal assets as they may have to risk using their homes as collateral to secure bonds to pay. Rielly is urging the Canadian government to create support programs to make sure B.C.'s independent wood processors can keep workers employed and their companies running. The U.S. Commerce Department said earlier in the week it will raise anti-dumping duties on Canadian softwood to 20.56 per cent, drawing the ire of several B.C. industry groups such as the B.C. Council of Forest Industries and the B.C. Lumber Trade Council. The Independent Wood Processors Association says the the "all-others" rate affecting its members will be raised from 14.4 per cent to 27.3 per cent, with the possibly of another increase "in the coming weeks" potentially pushing the duties for their products to as high as 35 per cent. 'Until the Canadian government can negotiate a settlement to this long-festering dispute, we need a government support program to keep our workers employed,' Rielly says, adding an overall duty of 35-per-cent would force members to pay retroactive duties of 27 per cent on products already shipped. Association executive director Brian Menzies describes independent wood product producers as "collateral damage" in the trade war, and says the only hope they have of avoiding the hit is either "a favourable appeal from the Canada-US-Mexico Agreement" or "pursuing a bilateral negotiated resolution." 'We should not face export taxes or quotas," Menzies says. "Our raw materials are not subsidized, and we are too small to 'dump' our products in the U.S. market. "We acquire logs and lumber at 'arm's length' from various suppliers on the open market, just like claims made by members of the U.S. Lumber Coalition, and yet our Canadian companies along with U.S. consumers must pay these unfair and costly duties.' Prime Minister Mark Carney had previously said that a future U.S.-Canada trade deal could include softwood lumber quotas. This report by The Canadian Press was first published July 26, 2025. Chuck Chiang, The Canadian Press Error in retrieving data Sign in to access your portfolio Error in retrieving data Error in retrieving data Error in retrieving data Error in retrieving data

B.C.‘s independent wood manufacturers decry retroactive U.S. softwood duties
B.C.‘s independent wood manufacturers decry retroactive U.S. softwood duties

Hamilton Spectator

time14 minutes ago

  • Hamilton Spectator

B.C.‘s independent wood manufacturers decry retroactive U.S. softwood duties

VANCOUVER - British Columbia's independent wood product makers say hundreds of small- and medium-sized manufacturers may be forced to shut down in light of the latest decision from the United States to raise anti-dumping duties on Canadian softwood. The province's Independent Wood Processors Association says in a release that the U.S. Commerce Department's decision this week to raise duties also includes a requirement for Canadian companies to retroactively remit duties for products shipped to the United States since Jan.1, 2023. Association chair Andy Rielly says in a statement that the requirement to pay duties on products shipped in the last 31 months could not only force small B.C. producers to shut down, but may also threaten operators' personal assets as they may have to risk using their homes as collateral to secure bonds to pay. Rielly is urging the Canadian government to create support programs to make sure B.C.'s independent wood processors can keep workers employed and their companies running. The U.S. Commerce Department said earlier in the week it will raise anti-dumping duties on Canadian softwood to 20.56 per cent, drawing the ire of several B.C. industry groups such as the B.C. Council of Forest Industries and the B.C. Lumber Trade Council. The Independent Wood Processors Association says the the 'all-others' rate affecting its members will be raised from 14.4 per cent to 27.3 per cent, with the possibly of another increase 'in the coming weeks' potentially pushing the duties for their products to as high as 35 per cent. 'Until the Canadian government can negotiate a settlement to this long-festering dispute, we need a government support program to keep our workers employed,' Rielly says, adding an overall duty of 35-per-cent would force members to pay retroactive duties of 27 per cent on products already shipped. Association executive director Brian Menzies describes independent wood product producers as 'collateral damage' in the trade war, and says the only hope they have of avoiding the hit is either 'a favourable appeal from the Canada-US-Mexico Agreement' or 'pursuing a bilateral negotiated resolution.' 'We should not face export taxes or quotas,' Menzies says. 'Our raw materials are not subsidized, and we are too small to 'dump' our products in the U.S. market. 'We acquire logs and lumber at 'arm's length' from various suppliers on the open market, just like claims made by members of the U.S. Lumber Coalition, and yet our Canadian companies along with U.S. consumers must pay these unfair and costly duties.' Prime Minister Mark Carney had previously said that a future U.S.-Canada trade deal could include softwood lumber quotas. This report by The Canadian Press was first published July 26, 2025.

Astronomer recruits Gwyneth Paltrow as ‘temporary spokesperson' amid fallout over viral Coldplay kiss cam clip
Astronomer recruits Gwyneth Paltrow as ‘temporary spokesperson' amid fallout over viral Coldplay kiss cam clip

Hamilton Spectator

time30 minutes ago

  • Hamilton Spectator

Astronomer recruits Gwyneth Paltrow as ‘temporary spokesperson' amid fallout over viral Coldplay kiss cam clip

Astronomer has a surprising new face as the company navigates a social media firestorm. Actress and businesswoman Gwyneth Paltrow appeared in a cheeky Q&A video posted by the IT company on social media Friday night after two of its top staffers resigned in the wake of an extremely public 'cheating' scandal . Astronomer's CEO, Andy Byron, and the executive in charge of human resources, Kristin Cabot, both resigned after the pair was caught by surprise cuddling and smiling on the Jumbotron at a Coldplay concert in Massachusetts last week. Their smiles fell when they realized they were on camera, as Cabot covered her face and spun away from the camera, and Byron ducked out of the frame. 'Either they're having an affair or they're just very shy,' lead singer Chris Martin joked in the clip. Paltrow, who is also Martin's ex-wife, has been hired 'on a very temporary basis to speak on behalf of the 300-plus employees at Astronomer,' she said in the video. 'Astronomer has gotten a lot of questions over the last few days, and they wanted me to answer some of the most common ones,' Paltrow continued in the video. As text reading 'OMG! What the actual …' appears on screen, Paltrow reassures viewers that 'Astronomer is the best place to run Apache Airflow.' 'We've been thrilled so many people have a new-found interest in data workflow automation.' As a question about the social media team appears on screen, Paltrow jumps in again: 'Yes! There is still room available at our Beyond Analytics event in September.' 'We will now be returning to what we do best: delivering game-changing results for our customers,' she said, thanking viewers for their interest in the company. The New York-based company, which provides big companies with a platform that helps them organize their data, was previously relatively obscure. With files from the Associated Press

DOWNLOAD THE APP

Get Started Now: Download the App

Ready to dive into a world of global content with local flavor? Download Daily8 app today from your preferred app store and start exploring.
app-storeplay-store