EGA starts-up final reduction cell in next generation technology pilot project
The pilot is a key step in readying EX smelting technology for large-scale industrialisation, making the project an important foundation of EGA's future growth and the further strengthening of EGA's position as the technology provider of choice in the global aluminium industry.
EX is EGA's 10th generation smelting technology and produces more aluminium with less energy and lower emissions.
Homaid Al Shimmari said, "EX technology enhances EGA's ability to remain at the forefront of the global aluminium industry. Our aim is to apply this technology in our planned facility in Oklahoma, the first new primary aluminium production plant to be built in the United States since 1980. As part of this effort, we will test the technology using alumina refined from bauxite sourced from multiple locations, to further prove its potential for global deployment.'
Abdulnasser Bin Kalban, Chief Executive Officer of Emirates Global Aluminium, stated, 'The pilot of our new EX technology is a strategic project for EGA, and is the latest chapter in our long history of industry leadership through technology innovation. The performance of EX reduction cells during start-up and in the first weeks of production has been even better than expected, and I am excited about what this technology will achieve. I thank each colleague who worked so hard to develop this new technology and build the pilot in Al Taweelah.'
EGA has developed its own aluminium smelting technology in the UAE for more than 30 years. All EGA smelter expansions since the 1990s have used EGA technology, and the company as retrofitted all its older potlines. EGA's technology development, and earlier work since 1980, has reduced the amount of electricity required to make each tonne of aluminium by 37.5 percent.
EGA was the first UAE industrial company to license its core process technology internationally, in a deal with Aluminium Bahrain in 2016 for the use of EGA's DX+ Ultra technology in the Bahraini company's Potline 6 expansion project.
The EX pilot in Al Taweelah will also be used to prove the most advanced Industry 4.0 capabilities in the global aluminium industry.
EGA launched its digital transformation in 2021 to boost cost competitiveness, agility, and flexibility, and to improve safety and sustainability. Since then, EGA has implemented more than 80 Industry 4.0 use cases, generating around $100 million in financial impact.
In January 2025, EGA became the first industrial company in the UAE and the first aluminium company in the world to be designated an Industry 4.0 global lighthouse by the World Economic Forum. Construction of the 10 pilot pots began in late 2024, and the first reduction cell was energised in mid-June 2024.
WAM
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Zawya
5 hours ago
- Zawya
EGA supplies CelestiAL solar aluminium to Brembo, global leader in braking solutions
Abu Dhabi, United Arab Emirates: Emirates Global Aluminium, the largest industrial company in the United Arab Emirates and the world's biggest 'premium aluminium' producer, today announced an agreement to increase its CelestiAL solar aluminium supply to Brembo, the global leader in braking solutions. CelestiAL is EGA's aluminium made in the UAE using solar power, which significantly reduces the emissions associated with aluminium smelting. The agreement is an extension of an existing supply agreement with Brembo and will see a significant increase in the supply of EGA's CelestiAL solar aluminium to the company. EGA has supplied aluminium to Brembo since 2019 for manufacturing innovative braking systems. Aluminium is a key metal for the automotive industry due to its light weight, strength, and corrosion resistance properties. EGA is one of the largest suppliers of foundry alloys to the automotive industry worldwide, including to BMW Group, and tier-one suppliers of Mercedes-Benz and Nissan. Brembo is a pioneer in the design, development, and production of high-performance, innovative braking technology. Founded in 1961 in Bergamo, Italy, Brembo supplies advanced braking systems to the world's most prestigious automotive manufacturers, including high-performance road and racetrack cars and motorcycles. Abdulnasser Bin Kalban, Chief Executive Officer of Emirates Global Aluminium, said: 'At EGA, we continue to drive innovation to produce the highest quality, low-carbon metal for our customers. I look forward to continuing our successful partnership with Brembo over the coming years and I thank them for their trust in EGA.' Beatrice Sarti, Chief Purchasing Officer of Brembo, said: 'Brembo takes another significant step forward in responsible procurement. This new agreement allows us to reduce emissions by nearly 50 per cent for the same volume of aluminium, further reinforcing our ongoing commitment to sustainability and environmental responsibility.' EGA was the first company in the world to produce aluminium commercially using solar power. Generating the electricity required accounts for some 60 per cent of the global aluminium industry's greenhouse gas emissions. EGA is certified to the global standard established by the automotive industry which aims to ensure even more rigorous quality management in the global automotive supply chain. Contacts at EGA: Theodora Gabrah tgabrah@ About EGA Since 1975, when it was founded as Dubai Aluminium by His Highness Sheikh Rashid bin Saeed Al Maktoum, Emirates Global Aluminium has been innovating aluminium to make modern life possible. Today EGA is the world's biggest 'premium aluminium' producer and the largest industrial company in the United Arab Emirates outside the oil and gas industry. EGA is equally-owned by Mubadala Investment Company of Abu Dhabi and the Investment Corporation of Dubai. It is the largest company jointly owned by the two Emirates. EGA is an integrated aluminium producer, with operations on four continents from bauxite mining to the production of cast primary aluminium and recycling. EGA operates aluminium smelters in Jebel Ali and Al Taweelah in the United Arab Emirates, an alumina refinery in Al Taweelah, a bauxite mine and associated export facilities in the Republic of Guinea, a speciality foundry in high strength recycled aluminium in Germany, and a recycling plant in the United States EGA's aluminium is the second largest made-in-the UAE export after oil and gas. In 2023, EGA sold 2.75 million tonnes of cast metal. EGA is the only UAE producer and makes the UAE the fifth largest aluminium producing nation in the world. EGA has more than 400 customers in over 50 countries. In 2023, value-added products accounted for 76 per cent of EGA's cast metal sales. EGA's aluminium is primarily used in the construction, automotive, packaging, aerospace and electronics industries. Around 10 per cent of EGA's aluminium production is sold in the UAE to around 20 downstream aluminium companies that make products with EGA's aluminium. The growing broader aluminium sector in the UAE supports more than 57,000 jobs. EGA itself employs over 7,000 of these people including more than 1,300 UAE Nationals. EGA has focused on technology development for over 30 years. EGA has used its own technology for every smelter expansion since the 1990s and has retrofitted all its older production lines. In 2016 EGA became the first UAE industrial company to licence its core industrial process technology internationally. As a corporate citizen of the UAE, EGA aspires in all its operations to be measured amongst the world's leading metals and mining companies in meeting its environmental and social responsibilities. In 2017, EGA became the first Middle East headquartered company to join the Aluminium Stewardship Initiative, a global programme to foster greater sustainability and transparency in the aluminium industry. In 2019, EGA's Al Taweelah site became the first in the Middle East to receive certification from ASI for its sustainability practices and performance. EGA's Jebel Ali site was certified in 2021. EGA's bauxite mining subsidiary, Guinea Alumina Corporation, achieved the Press Release first ASI certification in Guinea in 2023. Al Taweelah alumina refinery was certified later in 2023. EGA's German speciality foundry was certified in 2023, before its acquisition by EGA. In 2021, EGA began production of CelestiAL solar aluminium, produced with solar power from the Mohammed Bin Rashid Al Maktoum Solar Park on the outskirts of Dubai. EGA is the first company in the world to make aluminium commercially using the power of the sun. EGA was formed in 2014 through the merger of Dubai Aluminium and Emirates Aluminium. EGA's Jebel Ali aluminium smelter began production as DUBAL in 1979. At almost five square kilometres, this site is five times bigger than Dubai Mall. EMAL started production in 2009 and its Al Taweelah aluminium smelter was the largest single-site aluminium smelter in the world when completed. EGA's Al Taweelah site is five times bigger than Al Maryah Island at six square kilometres. EGA has its own power stations at both sites in the UAE, producing electricity to meet its needs. EGA's electricity generation capacity is 6,474 megawatts, making EGA the third largest electricity generator in the UAE after the Dubai and Abu Dhabi utilities. EGA also produces water through desalination units at its power plants. EGA began production at Al Taweelah alumina refinery in April 2019. EGA's alumina refinery is the first in the UAE and only the second in the Middle East. The project reduces the UAE's dependence on imported alumina and supplies over 48 per cent of EGA's needs. Bauxite exports from Guinea Alumina Corporation, EGA's wholly-owned subsidiary in Guinea, began in August 2019. The GAC project was one of the largest greenfield investments in Guinea in over 40 years. For more information on EGA please visit
Zawya
10 hours ago
- Zawya
EGA starts-up final reduction cell in Abu Dhabi pilot project
Emirates Global Aluminium (EGA) has announced that it has started up the final reduction cell in the company's next generation smelting technology pilot project at Al Taweelah in Abu Dhabi. The pilot is a key step in readying EX smelting technology for large-scale industrialisation, making the project an important foundation of EGA's future growth and the further strengthening of EGA's position as the technology provider of choice in the global aluminium industry. EX is EGA's 10th generation smelting technology and produces more aluminium with less energy and lower emissions. Speaking on the occasion, Chairman Homaid Al Shimmari said: "EX technology enhances EGA's ability to remain at the forefront of the global aluminium industry. Our aim is to apply this technology in our planned facility in Oklahoma, the first new primary aluminium production plant to be built in the US since 1980." "As part of this effort, we will test the technology using alumina refined from bauxite sourced from multiple locations, to further prove its potential for global deployment," he stated. CEO Abdulnasser Bin Kalban said the pilot EX is a strategic project for EGA, and is the latest chapter in its long history of industry leadership through technology innovation. "The performance of EX reduction cells during start-up and in the first weeks of production has been even better than expected, and I am excited about what this technology will achieve," he added.-TradeArabia News Service Copyright 2024 Al Hilal Publishing and Marketing Group Provided by SyndiGate Media Inc. (
Gulf Today
3 days ago
- Gulf Today
EGA starts-up final reduction cell in next generation technology pilot project
Homaid Al Shimmari, Chairman of Emirates Global Aluminium (EGA), started-up the final reduction cell in the company's next generation smelting technology pilot project in Al Taweelah. The pilot is a key step in readying EX smelting technology for large-scale industrialisation, making the project an important foundation of EGA's future growth and the further strengthening of EGA's position as the technology provider of choice in the global aluminium industry. EX is EGA's 10th generation smelting technology and produces more aluminium with less energy and lower emissions. Homaid Al Shimmari said, "EX technology enhances EGA's ability to remain at the forefront of the global aluminium industry. Our aim is to apply this technology in our planned facility in Oklahoma, the first new primary aluminium production plant to be built in the United States since 1980. As part of this effort, we will test the technology using alumina refined from bauxite sourced from multiple locations, to further prove its potential for global deployment.' Abdulnasser Bin Kalban, Chief Executive Officer of Emirates Global Aluminium, stated, 'The pilot of our new EX technology is a strategic project for EGA, and is the latest chapter in our long history of industry leadership through technology innovation. The performance of EX reduction cells during start-up and in the first weeks of production has been even better than expected, and I am excited about what this technology will achieve. I thank each colleague who worked so hard to develop this new technology and build the pilot in Al Taweelah.' EGA has developed its own aluminium smelting technology in the UAE for more than 30 years. All EGA smelter expansions since the 1990s have used EGA technology, and the company as retrofitted all its older potlines. EGA's technology development, and earlier work since 1980, has reduced the amount of electricity required to make each tonne of aluminium by 37.5 percent. EGA was the first UAE industrial company to license its core process technology internationally, in a deal with Aluminium Bahrain in 2016 for the use of EGA's DX+ Ultra technology in the Bahraini company's Potline 6 expansion project. The EX pilot in Al Taweelah will also be used to prove the most advanced Industry 4.0 capabilities in the global aluminium industry. EGA launched its digital transformation in 2021 to boost cost competitiveness, agility, and flexibility, and to improve safety and sustainability. Since then, EGA has implemented more than 80 Industry 4.0 use cases, generating around $100 million in financial impact. In January 2025, EGA became the first industrial company in the UAE and the first aluminium company in the world to be designated an Industry 4.0 global lighthouse by the World Economic Forum. Construction of the 10 pilot pots began in late 2024, and the first reduction cell was energised in mid-June 2024. WAM
