Developed by Pune's ARDE and Bharat Forge: Close Quarter Battle carbine ready for frontline ops
A FULLY indigenous and highly effective system for counter-insurgency and counter-terrorism (CI/CT) operations, the Close Quarter Battle (CQB) carbine developed by the Pune-based facility of the Defence Research and Development Organisation (DRDO) and manufactured by Pune-headquartered Bharat Forge as development partner — is ready to be inducted into the Indian Army for frontline operations.
The lightweight, compact and effective weapon system has been designed by the Pune based Armament Research and Development Establishment (ARDE) which is a key facility of Armament and Combat Engineering Cluster of the DRDO. A post on X by the DRDO read, 'Significantly boosting Atma Nirbharta in critical technology, 5.56×45 mm CQB Carbine, designed and developed by Armament Research and Development Establishment and produced by Bharat Forge Ltd selected as L1 in Indian Army Request for Proposal (RFP).'
An RFP was initiated by the Ministry of Defence for procurement of more than 4.23 lakh units of the Close Quarter Battle carbines in November 2022. The CQB designed by ARDE and manufactured by the development partner, Bharat Forge Ltd was also fielded. Many other industries also fielded their respective products. After extensive performance evaluation and other quality and maintainability trials, five weapons were qualified. CQB carbine fielded by Bharat Forge Limited and designed by ARDE was the lowest bidder (L1), DRDO officials said.
ARDE selected Bharat Forge Limited and Advanced Weapons and Equipment India Limited (AWEIL) — which is a government of India enterprise — through a competitive bidding process for development contracts and established the technology with both industry partners in a span of two years. The CQB weapons manufactured by both the industry partners had qualified in the RFP trials and Bharat Forge manufactured system emerged as the lowest bidder.
The 5.56×45 mm CQB carbine is a light weight, compact, effective weapon for use in close combat CI/CT operations. The design of CQB carbine is based on the high strength steel alloy based machined upper and lower bodies with bottom opening configuration. The CQB carbine is designed to fire in-service 5.56×45 mm ammunition.
One of the unique features is it can fire both the NATO ammunition and INSAS ammunition. The weapon weighs less than 3.3kg with an effective range of 200 meters. ARDE-Bharat Forge CQB is a 100 percent Make in India weapon, DRDO officials said. The carbine uses forged steel technology and metal injection moulding technology which makes it highly reliable and accurate. The weapon is equipped with a 30 round magazine with a very high rate of fire.
The weapon was tested in all terrains, operating conditions and in temperature ranges from subzero to scorching heat conditions. 'It is a case of full synergy between the development agency and manufacturing agency which has led to the success of the product making the DRDO proud.' an officer said.
ARDE has already developed a 7.62×51 mm Assault Rifle named Ugram, which means ferocious. Ugram's design is based on the CQB Carbine platform and has an effective range of 500 meters. This weapon is being manufactured by Hyderabad based Dvipa Defence India Pvt Ltd as a development partner.
Sushant Kulkarni is a Special Correspondent with The Indian Express in Pune with 12+ years of experience covering issues related to Crime, Defence, Internal Security and Courts. He has been associated with the Indian Express since July 2010.
Sushant has extensively reported on law and order issues of Pune and surrounding area, Cyber crime, narcotics trade and terrorism. His coverage in the Defence beat includes operational aspects of the three services, the defence research and development and issues related to key defence establishments. He has covered several sensitive cases in the courts at Pune.
Sushant is an avid photographer, plays harmonica and loves cooking. ... Read More
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Time of India
2 hours ago
- Time of India
Manimajra's 24x7 water supply project hits turbulence; MC internal report, Chandigarh BJP chief flag major flaws
1 2 3 4 Chandigarh: What was once hailed as a flagship initiative under the 'Viksit Bharat' vision is now under intense scrutiny. The ambitious 24x7 water supply pilot project in Manimajra, inaugurated with much fanfare by Union home minister Amit Shah in Aug 2024, has hit turbulent waters. Amid growing concerns and political pressure, Punjab governor and UT administrator Gulab Chand Kataria is set to convene a high-level meeting to dissect the project's faltering progress. The move comes in the wake of a strongly worded letter from Chandigarh BJP president Jatinder Pal Malhotra to the Union home minister, expressing alarm over the project's execution. Sources confirm that the ministry of home affairs has since forwarded the letter to the UT Administrator, prompting urgent administrative attention. The project, spearheaded by Chandigarh Smart City Limited and executed through a Rajasthan-based agency, was envisioned to revolutionize water supply in Manimajra — transitioning from intermittent to round-the-clock pressurized water delivery, complete with smart metering and automated control systems. But the reality on the ground paints a starkly different picture. A confidential internal report by the Engineering Department of the Municipal Corporation has laid bare a series of alarming discrepancies: No zone in Manimajra has achieved 24x7 pressurized water supply; pressure reducing valves (PRVs) and variable frequency drive (VFD) pumping systems remain non-operational; major lapses in the construction of underground reservoirs, pumping stations, and the rollout of the SCADA automation system; and much-touted smart water meters are yet to be fully deployed. The project was awarded through an e-tender at a staggering Rs 165.86 crore, split into capital expenditure (capex) — Rs 74.56 crore — and operational expenditure (OPEX) — Rs 91.29 crore. Despite the scale of investment, the outcomes have been underwhelming — a fact that has not gone unnoticed by local leadership. Malhotra has reportedly warned that the project's failure is damaging the BJP's image and undermining the Prime Minister's development agenda. What's Next? With the spotlight now firmly on the project, the upcoming meeting chaired by Kataria is expected to be a turning point. Malhotra's letter to Shah In a letter to Amit Shah, Chandigarh BJP president Jatinder Pal Malhotra said, "In August 2024, a project was inaugurated by you, in the presence of administrator Gulab Chand Kataria, chief secretary Rajeev Verma, and other dignitaries, for 24-hour water supply with proper pressure for all floors. The funds amounting to Rs 75 crore were allocated for the project under the smart city mission. The reality of this project clearly reflects that the whole project has collapsed, and nobody is held accountable and responsible for this wastage of Rs 75 crore. Sir, on one side, taxes are being imposed on the public, and on the other, Rs 75 crore have been wasted. Certainly, there are policy lapses or a lack of accountability in the system of administration of UT Chandigarh. The media reports are causing grave damage to our reputation in public at large and are also not in tune with our visionary Prime Minister's dream of VIKSIT BHARAT: 2047. Your good self is thus humbly requested to intervene in the matter and call for a detailed inquiry report on the same."
Time of India
2 hours ago
- Time of India
Sukhbir Badal dares Bhagwant Mann to prove foreign funding in Bikram Singh Majithia-linked company
Chandigarh: Shiromani Akali Dal (SAD) president Sukhbir Singh Badal on Friday challenged chief minister Bhagwant Mann to prove that Saraya Industries Limite, in which his party colleague Bikram Singh Majithia holds an 11% inherited stake, received even a single rupee in foreign funding since 2007. He dismissed allegations made in the disproportionate assets case against Majithia as baseless and politically motivated. Addressing a press conference, Sukhbir said, "The only foreign funding received by Saraya Industries was in March 2006—one year before SAD formed govt in the state—when it received Rs 35 crore from United States-based Clearwater Corporation in exchange for 25% shares in the company. Majithia entered politics only in 2007. " He asserted that Clearwater Corporation, which had offices in several countries, invested Rs 50,000 crore globally. "All money invested by this company through the NBFC in Saraya Industries was done after due clearance from the Reserve Bank of India (RBI) and approval of the Foreign Investment Promotion Board (FIPB)." Sukhbir made it clear that all transactions of Saraya Industries were scrutinised and accepted by the income-tax department. by Taboola by Taboola Sponsored Links Sponsored Links Promoted Links Promoted Links You May Like Преносим лазерен заваръчен пистолет, 50% отстъпка днес HL Купете сега Undo "This clearly proves that claims of an investment of Rs 540 crore into Saraya Industries through foreign funding are absurd and malicious and being done with the sole purpose of defaming Majithia," he said. He added Saraya Industries was a private limited company deemed to be a public limited company and was a different entity from Majithia, and could not be solely associated with the latter. "Majithia has no control over the company's day-to-day functioning," Sukhbir said. Sukhbir reiterated that Mann pressured DGP Gaurav Yadav to register a case against Majithia because the latter was constantly exposing him and his corrupt and immoral cabinet colleagues. "The CM rang up the DGP on June 24 night and threatened to remove him in case he did not register a case against Majithia by the morning. Consequently, DGP wrote to the vigilance bureau to register a case against the Akali leader at 10.40 pm the same night. Then, a disproportionate assets case was registered against Mr Majithia at 4.40am on June 25," Sukhbir said. Terming the entire case as illegal and wilful fabrication, Badal said, "We will go to the people and expose the AAP govt." "The truth is the AAP govt failed to find any drugs in the NDPS case and has now failed to find any illegal assets in the Disproportionate Assets case," Badal added. MSID:: 121993707 413 |
Time of India
3 hours ago
- Time of India
Showroom owners duped of Rs48L in bid to by scrap copper
Pune: An automobile showroom owner (30) from Satara Road filed a complaint with the Parvati police, stating that online fraudsters duped him of Rs 47.72 lakh between April and May by promising to sell him scrap copper. The victim is a resident of Satara Road. He stated that his partner wanted to buy large quantities of scrap copper. He conducted an online search for companies selling scrapped copper. An officer of the Parvati police said, "The complainant and his partner stumbled upon a link to a South Africa-based company. They contacted the company via email and put forth their requirement for the scrapped copper." You Can Also Check: Pune AQI | Weather in Pune | Bank Holidays in Pune | Public Holidays in Pune "The company officials responded to the mail, claiming that the company could fulfil the requirement," police said. According to the police, the company demanded a 30% advance amount from the victim. The company stated that the remaining 70% would be taken post-delivery. "The complainant and his partner liked the idea and decided to go ahead with the deal," police said. "The victims took the banking details of the company and transferred 30% amount—Rs 47.72 lakh—as an advance payment," police said. "After the payment, the material did not reach Pune or Mumbai. The suspects kept promising the delivery. The complainant and his partner then decided to investigate the company's background. They visited several business sites in South Africa and realised that no such company existed. They realised it was a fake company," police said.
