Nissan Abandons Plans for Two U.S.-Made EV Sedans and Eyes New SUV
The automaker acknowledged that the sedan market in the U.S. is shrinking and that it likely would not have been able to bring the models to market at a low enough price.
Instead, Nissan will shift its focus to starting production of the Xterra-inspired SUV shown last month.
It appears Nissan did the math and decided that there's no money to be had in electric sedans—at least for the time being. The automaker has cancelled plans to bring two electric sedans to the United States, according to a new report from Automotive News. The report is based on an internal memo, dated April 21, that the outlet reviewed.
Speaking to AN, Nissan's North American chairperson, Christian Meunier, said, "The sedan market is shrinking... we need to face reality." Part of the issue, according to Ponz Pandikuthira, Nissan's North America product planning chief, is the cost to develop and produce EV sedans.
"Premium sedans are not our niche," Pandikuthira told AN. "If the [electric] sedans start at $45,000-plus... you're not in the core of the sedan market anymore."
But for Nissan, the cost of the required batteries and technology would have put the new models out of reach of their usual customer base. Instead, the automaker is planning to focus on a new SUV that it will build in Mississippi.
According to the AN report, the vehicle (codenamed PZ1K) is the same Xterra-inspired SUV the brand showed at an event in Japan last month. While production was originally scheduled to start in early 2027, the memo shows that it will instead start in January 2028.
An Infiniti model, codenamed PZ1J, is also planned, but production for that won't start until May, some four months behind schedule. There are also plans for a third model, an unspecified EV, though the memo gave no hint at its identity or production timeline.
Car and Driver reached out to Nissan to confirm the details reported by AN. We'll update this story if we get a response.
You Might Also Like
Car and Driver's 10 Best Cars through the Decades
How to Buy or Lease a New Car
Lightning Lap Legends: Chevrolet Camaro vs. Ford Mustang!
Hashtags
Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles
Axios
13 minutes ago
- Axios
U.S. automakers find little to cheer in Japan trade deal
U.S. automakers may not sell a lot of cars in Japan, even after a new trade pact between the two countries — but they're definitely worried about how the deal might disadvantage them at home. Why it matters: President Trump's promise to strengthen the U.S. auto sector often runs counter to his trade and policy actions, leaving automakers feeling frustrated and confused. Driving the news: The trade deal announced by the president includes a 15% "reciprocal" tariff on goods imported from Japan and $550 billion of Japanese investments in the U.S. "Perhaps most importantly," the president wrote on Truth Social, "Japan will open their Country to Trade including Cars and Trucks, Rice and certain other Agricultural Products, and other things." Reality check: Unfair tariffs are not what has prevented U.S. automakers from selling more cars in Japan, says S&P Global Mobility analyst Stephanie Brinley. "Japan hasn't had a tariff on imported vehicles," she tells Axios. The bigger problem is that American automakers don't produce the small cars that Japanese consumers prefer. It's also a right-hand-drive market, which requires extra engineering. Safety and emissions standards are different in Japan, too. In an interview with Bloomberg, Commerce Secretary Howard Lutnick said Japan will "take U.S. cars based on U.S. standards, so you don't have to make a different car" for the Japanese market. "You can take the car you make in Detroit, put it on a boat and send it," he said. But whether anyone in Tokyo will buy a Ford F-150 remains an open question. Zoom in: In the U.S. market, the new 15% tariff rate on Japanese cars will be lowered from the 25% Trump imposed on all imported vehicles earlier this year. But it's sharply higher than the 2.5% that Japanese carmakers had been paying before Trump took office. Between the lines: Trump has shifted trade war psychology, as Axios Macro authors Neil Irwin and Courtenay Brown noted. When a 25% tariff is on the table, striking a deal at 15% brings a collective sigh of relief to both investors and manufacturers. Japanese carmakers are signaling that they see it as a positive step that will remove uncertainty. Yes, but: It's American carmakers who are most upset. "Any deal that charges a lower tariff for Japanese imports with virtually no U.S. content than the tariff imposed on North American-built vehicles with high U.S. content is a bad deal for U.S. industry and U.S. auto workers," said Matt Blunt, head of the American Automotive Policy Council, which represents General Motors, Ford and Stellantis. What to watch: All automakers, including Japanese players, are anxious to see how the administration updates the U.S.-Mexico-Canada-Agreement. The administration is also negotiating deals with South Korea and the European Union that will be critical for automakers, not just for Korean or European brands. GM imported 419,000 vehicles from South Korea in 2024, including key models like the Chevrolet Trax and Trailblazer.
Hamilton Spectator
22 minutes ago
- Hamilton Spectator
AirBoss to Release 2nd Quarter 2025 Earnings on August 7, 2025
NEWMARKET, Ontario, July 23, 2025 (GLOBE NEWSWIRE) — AirBoss of America Corp. (TSX: BOS) (OTCQX:ABSSF) (the 'Company' or 'AirBoss') today announced that it will release its second quarter 2025 results after markets close on August 7th, 2025. The release will be followed by a conference call to discuss the results on Friday, August 8, 2025, at 9:00 am ET. About AirBoss AirBoss of America is a diversified developer, manufacturer and provider of survivability solutions, advanced custom rubber compounds and finished rubber products that are designed to outperform in the most challenging environments. Founded in 1989, the company operates through two divisions. AirBoss Rubber Solutions is a North American custom rubber compounder with 500 million turn pounds of annual capacity. AirBoss Manufactured Products is a supplier of anti-vibration and rubber-molded solutions to the North American automotive market and other sectors, and also a global supplier of personal and respiratory protective equipment and technology for the defense, healthcare, medical and first responder communities, through its AirBoss Defense operations. The Company's shares trade on the TSX under the symbol BOS and on the OTCQX under the symbol ABSSF. Visit for more information.
Business Wire
an hour ago
- Business Wire
Graco Reports Second Quarter Results
MINNEAPOLIS--(BUSINESS WIRE)--Graco Inc. (NYSE: GGG) today announced results for the second quarter ended June 27, 2025. Summary $ in millions except per share amounts (1) Excludes the impact of excess tax benefits from stock option exercises. See Financial Results Adjusted for Comparability below for a reconciliation of adjusted non-GAAP financial measures to GAAP. Expand Net sales for the second quarter increased 3 percent. Incremental sales from acquired operations contributed 6 percentage points of sales growth. EMEA and Asia Pacific sales growth was partially offset by a decrease in the Americas. The gross profit margin rate declined approximately 2 percentage points for the second quarter due to higher product costs, including $4 million of increased tariff costs, and the unfavorable effects of lower margin rates from acquired operations. Total operating expenses for the second quarter increased 2 percentage points, including a total of 7 percentage points from acquired operations. Excluding the impact of acquired operations, operating expenses decreased $7 million (5 percentage points). Other non-operating income decreased $3 million for the quarter, mostly due to $5 million of exchange losses on net liabilities of certain foreign operations and lower interest income. Net earnings decreased 4 percent for the second quarter due to a lower gross margin rate and lower non-operating income. Other notable items for the year to date included an increase in cash flow from operations of $50 million to $308 million, primarily reflective of reductions in inventory levels. Year-to-date share repurchases totaled 4.4 million shares for $361 million. "Overall sales were up 3% in the quarter despite an organic revenue decline of 3%, primarily due to lower sales in the Contractor segment," said Mark Sheahan, Graco's President and Chief Executive Officer. "The Contractor segment organic sales decline was driven by softness in the North American construction markets, cautious channel and contractor investment, and reduced foot traffic in the home centers. The Americas drove the organic revenue decline as we saw growth in volume in both the EMEA and Asia Pacific regions. In addition, sales of powder finishing equipment continued to be strong during the quarter with improved activity in China." Consolidated Results Net sales for the second quarter increased 3 percent from the comparable period last year. Second quarter net sales decreased 3 percent in the Americas, increased 19 percent in EMEA (14 percent at consistent translation rates), and increased 12 percent in Asia Pacific (13 percent at consistent translation rates). Year-to-date net sales increased 5 percent compared to last year (6 percent at consistent translation rates). Year-to-date net sales increased 1 percent in the Americas, increased 14 percent in EMEA (13 percent at consistent translation rates), and increased 12 percent in Asia Pacific (14 percent at consistent translation rates). Changes in currency translation rates increased worldwide sales by $4 million for the second quarter and decreased worldwide sales by $3 million for the year to date. Acquired operations contributed $32 million of sales growth for the second quarter and $62 million of sales growth for the year to date. The gross profit margin rate declined approximately 2 percentage points for both the second quarter and year to date from the comparable periods last year due to higher product costs, including $4 million of increased tariff costs, and the unfavorable effects of lower margin rates from acquired operations. Total operating expenses increased $3 million (2 percent) for the second quarter and $3 million (1 percent) for the year to date, respectively, compared to last year. Incremental expenses from acquired operations of $9 million for the quarter and $19 million for the year to date were partially offset by decreases in product development spending, sales and earnings-based incentives and share-based compensation. The second quarter and year to date periods last year included $3 million of expenses associated with the relocation to a new distribution center. Other non-operating income decreased $3 million for both the second quarter and year to date from the comparable periods last year and included exchange losses on net liabilities of certain foreign operations of $5 million for the quarter and $8 million for the year to date. Favorable market valuation changes on investments held to fund certain retirement benefits partially offset these exchange losses. Other income for the year to date included a $5 million gain in the first quarter from the sale of a former manufacturing and distribution facility in Switzerland. The effective income tax rate was 19 percent for both the second quarter and the year to date. Adjusted to exclude the impacts of excess tax benefits from stock option exercises (see Financial Results Adjusted for Comparability below), the adjusted effective income tax rate of 20 percent for both the quarter and year to date was comparable to the respective periods last year. Segment Results Management assesses performance of segments by reference to operating earnings excluding unallocated corporate expenses. For a reconciliation of segment operating earnings to consolidated operating earnings, refer to the segment information table included in the financial statement section of this release. Certain measurements of segment operations are summarized below: Components of net sales change by geographic region for the Contractor segment were as follows: Incremental sales from acquired operations in the Contractor segment for the quarter and year to date were partially offset by weakness in worldwide construction markets, particularly in North America. The operating margin rate declined 5 percentage points for the quarter and year to date, including 3 percentage points from higher product costs, mainly due to increased tariffs, and 2 percentage points from the unfavorable effects of lower margin rates of acquired operations. Components of net sales change by geographic region for the Industrial segment were as follows: Industrial segment sales for the second quarter were flat and increased 2 percentage points for the year to date as favorable volumes in EMEA and Asia Pacific offset decreased sales in the Americas. The operating margin rate for this segment was flat for the quarter as realized pricing offset unfavorable product and channel mix and higher product costs. The year to date operating margin increased 1 percentage point as realized pricing and lower expenses more than offset higher product costs. Components of net sales change by geographic region for the Expansion Markets segment were as follows: Expansion Market net sales decreased for the second quarter as continued sales growth in the semiconductor product application was more than offset by decreased sales in the environmental product application. For the year to date, double-digit sales growth in the semiconductor product application more than offset softness in other applications. The operating margin rate for this segment increased for both the quarter and year to date driven by increased sales volume and lower expenses. Outlook "Component costs have risen due to tariffs introduced this quarter," said Sheahan. "To help offset these higher costs, we will implement a targeted price increase beginning in September. Although the timing of this action differs from our usual approach, it is a necessary response to the current trade environment facing industrial manufacturers and should help mitigate the effects of the tariffs. This pricing decision, along with our upcoming new product launches and the steady order rates we saw throughout the quarter, gives us confidence in our previous guidance for the rest of the year. We are maintaining our 2025 revenue outlook of low single-digit sales growth on an organic constant-currency basis." Financial Results Adjusted for Comparability Excluding the impact of excess tax benefits from stock option exercises presents a more consistent basis for comparison of financial results. A calculation of the non-GAAP adjusted measurements of income taxes, effective income tax rate, net earnings and diluted earnings per share follows (in millions except per share amounts): Cautionary Statement Regarding Forward-Looking Statements The Company desires to take advantage of the 'safe harbor' provisions regarding forward-looking statements of the Private Securities Litigation Reform Act of 1995 and is filing this Cautionary Statement in order to do so. From time to time various forms filed by our Company with the Securities and Exchange Commission, including our Form 10-K, Form 10-Qs and Form 8-Ks, and other disclosures, including our 2024 Overview report, press releases, earnings releases, analyst briefings, conference calls and other written documents or oral statements released by our Company, may contain forward-looking statements. Forward-looking statements generally use words such as 'expect,' 'foresee,' 'anticipate,' 'believe,' 'project,' 'should,' 'estimate,' 'will,' and similar expressions, and reflect our Company's expectations concerning the future. All forecasts and projections are forward-looking statements. Forward-looking statements are based upon currently available information, but various risks and uncertainties may cause our Company's actual results to differ materially from those expressed in these statements. The Company undertakes no obligation to update these statements in light of new information or future events. Future results could differ materially from those expressed, due to the impact of changes in various factors. These risk factors include, but are not limited to, risks relating to the demand for our products and the level of commercial and industrial activity worldwide; changes in currency translation rates; international and domestic instability; interest rate fluctuations and changes in credit markets; global sourcing of materials; interruptions of or intrusions into our information systems; intellectual property rights; the use of generative artificial intelligence; conducting business internationally; catastrophic events; our ability to attract, develop and retain qualified personnel; public health crises; our growth strategies and acquisitions; potential goodwill impairment; our ability to compete effectively; our dependence on a few large customers; our dependence on cyclical industries; changes in laws and regulations; climate-related laws, regulations and accords; environmental, social and governance-related expectations and requirements; compliance with anti-corruption and trade laws; changes in tax or tariff rates or the adoption of new tax or tariff legislation; and costs associated with legal proceedings. Please refer to Item 1A of our Annual Report on Form 10-K for fiscal year 2024 (and the most recent Form 10-Q) for a more comprehensive discussion of these and other risk factors. These reports are available on the Company's website at and the Securities and Exchange Commission's website at Shareholders, potential investors and other readers are urged to consider these factors in evaluating forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements. Investors should realize that factors other than those identified above and in Item 1A of our Annual Report on Form 10-K for fiscal year 2024 might prove important to the Company's future results. It is not possible for management to identify each and every factor that may have an impact on the Company's operations in the future as new factors can develop from time to time. Conference Call Graco management will hold a conference call, including slides via webcast, with analysts and institutional investors on Thursday, July 24, 2025, at 11 a.m. ET, 10 a.m. CT, to discuss Graco's second quarter results. A real-time listen-only webcast of the conference call will be broadcast by Nasdaq. Individuals can access the call and view the slides on the Company's website at Listeners should go to the website at least 15 minutes prior to the live conference call to install any necessary audio software. About Graco Graco Inc. supplies technology and expertise for the management of fluids and coatings in both industrial and commercial applications. It designs, manufactures and markets systems and equipment to move, measure, control, dispense and spray fluid and powder materials. A recognized leader in its specialties, Minneapolis-based Graco serves customers around the world in the manufacturing, processing, construction and maintenance industries. For additional information about Graco Inc., please visit us at SEGMENT INFORMATION (Unaudited) (In thousands) Three Months Ended Six Months Ended Jun 27, 2025 Jun 28, 2024 Jun 27, 2025 Jun 28, 2024 Net Sales Contractor $ 288,959 $ 269,638 $ 543,991 $ 499,680 Industrial 242,277 241,878 473,930 466,738 Expansion Markets 40,570 41,727 82,169 79,014 Total $ 571,806 $ 553,243 $ 1,100,090 $ 1,045,432 Operating Earnings Contractor $ 75,489 $ 84,362 $ 137,419 $ 150,503 Industrial 82,372 81,564 161,967 154,653 Expansion Markets 8,829 8,435 18,894 15,187 Unallocated corporate (expense) (9,206 ) (13,002 ) (16,783 ) (25,988 ) Total $ 157,484 $ 161,359 $ 301,497 $ 294,355 Expand
