
Juiced for decades
EV batteries age slower than you think
There is ongoing discourse surrounding the longevity and degradation behaviour of lithium-ion batteries in electric vehicles (EVs), with misconceptions often suggesting they deteriorate significantly within a few years. However, recent large-scale telemetry studies provide data-driven clarity on actual degradation trends.
According to Geotab, which analysed performance data from over 10,000 EVs across multiple OEMs, most EV batteries exhibit an average degradation rate of ~1.8% per annum. This implies that after 20 years, under normal operating conditions, a battery may retain approximately 64% of its original usable capacity, assuming no catastrophic failures.
This estimated 20-year lifespan notably exceeds the average vehicle ownership period in North America (~14 years), indicating that battery longevity is unlikely to be a limiting factor in the usable life of most EVs.
Failure Rates and Architecture
While concerns about high-voltage battery pack failures are valid, empirical evidence shows that modern EVs (post-2013 models) demonstrate a battery failure incidence below 0.5%, largely due to robust battery management systems (BMS) and cell-level fault tolerance.
Thermal Degradation and Climate Sensitivity
Battery degradation is strongly influenced by ambient temperature profiles. Elevated temperatures accelerate electrolyte decomposition and SEI (solid electrolyte interphase) growth, especially during charging. That said, contemporary EVs integrate active thermal management systems, including liquid cooling loops and heat pumps, which maintain pack temperatures within optimal operating ranges (typically 20–40°C).
Users in hot climates are still advised to avoid prolonged exposure to direct sunlight, especially during DC fast charging, as thermal buildup can increase degradation rates. Fast charging introduces higher current densities, elevating cell temperatures and potentially causing lithium plating during high SOC charging.
SOC Range and Chemistries
Battery life can also be optimised by managing depth-ofdischarge (DoD):
• For nick - el-rich chemistries such as NMC (nickel-manganese-cobalt) or NCA (nickel-cobalt-aluminium), maintaining an SOC between 20%–80% is beneficial. These chemistries are more sensitive to high voltages and full charge conditions.
• LFP (lithium iron phosphate) chemistries are more thermally stable and tolerant of full cycles, but recent findings suggest that persistent charging to 100% may still marginally reduce cycle life, especially under elevated temperatures or high C-rates.
Conclusion
In real-world usage, modern EV battery packs are engineered to outlast the vehicles themselves, provided appropriate thermal and charging practices are followed. The convergence of better cell chemistries, thermal management, and BMS algorithms ensures degradation remains within predictable bounds, making battery replacement a non-issue for the majority of end-users over typical vehicle lifespans.
Hashtags

Try Our AI Features
Explore what Daily8 AI can do for you:
Comments
No comments yet...
Related Articles


Daily Tribune
5 days ago
- Daily Tribune
Juiced for decades
TDT | agencies EV batteries age slower than you think There is ongoing discourse surrounding the longevity and degradation behaviour of lithium-ion batteries in electric vehicles (EVs), with misconceptions often suggesting they deteriorate significantly within a few years. However, recent large-scale telemetry studies provide data-driven clarity on actual degradation trends. According to Geotab, which analysed performance data from over 10,000 EVs across multiple OEMs, most EV batteries exhibit an average degradation rate of ~1.8% per annum. This implies that after 20 years, under normal operating conditions, a battery may retain approximately 64% of its original usable capacity, assuming no catastrophic failures. This estimated 20-year lifespan notably exceeds the average vehicle ownership period in North America (~14 years), indicating that battery longevity is unlikely to be a limiting factor in the usable life of most EVs. Failure Rates and Architecture While concerns about high-voltage battery pack failures are valid, empirical evidence shows that modern EVs (post-2013 models) demonstrate a battery failure incidence below 0.5%, largely due to robust battery management systems (BMS) and cell-level fault tolerance. Thermal Degradation and Climate Sensitivity Battery degradation is strongly influenced by ambient temperature profiles. Elevated temperatures accelerate electrolyte decomposition and SEI (solid electrolyte interphase) growth, especially during charging. That said, contemporary EVs integrate active thermal management systems, including liquid cooling loops and heat pumps, which maintain pack temperatures within optimal operating ranges (typically 20–40°C). Users in hot climates are still advised to avoid prolonged exposure to direct sunlight, especially during DC fast charging, as thermal buildup can increase degradation rates. Fast charging introduces higher current densities, elevating cell temperatures and potentially causing lithium plating during high SOC charging. SOC Range and Chemistries Battery life can also be optimised by managing depth-ofdischarge (DoD): • For nick - el-rich chemistries such as NMC (nickel-manganese-cobalt) or NCA (nickel-cobalt-aluminium), maintaining an SOC between 20%–80% is beneficial. These chemistries are more sensitive to high voltages and full charge conditions. • LFP (lithium iron phosphate) chemistries are more thermally stable and tolerant of full cycles, but recent findings suggest that persistent charging to 100% may still marginally reduce cycle life, especially under elevated temperatures or high C-rates. Conclusion In real-world usage, modern EV battery packs are engineered to outlast the vehicles themselves, provided appropriate thermal and charging practices are followed. The convergence of better cell chemistries, thermal management, and BMS algorithms ensures degradation remains within predictable bounds, making battery replacement a non-issue for the majority of end-users over typical vehicle lifespans.


Daily Tribune
02-06-2025
- Daily Tribune
China accelerates EV battery swapping with new tech from CATL
TDT | agencies China is not just leading the global electric vehicle (EV) market—it's poised to transform the way EVs are powered. Chinese automakers and battery giants are now pushing battery swapping technology to new heights. Changan Automobile has launched the first 1,000 units of its Oshan 520 sedan, primarily targeting taxi services. However, these vehicles mark a major technological leap as the first to feature CATL's innovative Choco-SEB swappable battery packs. These batteries can be exchanged in just 100 seconds at dedicated swap stations—an efficiency game-changer for EV users. Chongqing already hosts 34 such stations, and CATL plans to expand this network to 1,000 stations across 31 cities by 2025. The infrastructure is designed to support up to 822 swaps per day per station, offering a fast, convenient alternative to conventional charging. CATL, the world's largest EV battery manufacturer, is partnering with major automakers—including Nio, Chery, GAC, SAIC, FAW, and BAIC—to integrate this technology into upcoming models. Among the vehicles adopting the Choco-SEB system are the GAC Aion S, Hongqi E-QM5, SAIC Roewe D7, BAIC C66, Wuling Bingo, and SAIC's Maxus range. While ideal for commercial fleets and taxis, this technology also has significant potential for long-distance drivers. Battery swapping stations on highways could one day rival the convenience of traditional petrol stations, making EV ownership even more practical and appealing.


Daily Tribune
02-06-2025
- Daily Tribune
Renault Kwid EV to launch by 2026
TDT | agencies Renault is gearing up to introduce the Kwid EV in India, marking its entry into the affordable electric vehicle segment. Based on the globally sold Dacia Spring EV, the Kwid EV is expected to launch by late 2026 or early 2027. Under the hood, the Kwid EV is anticipated to feature a 26.8 kWh lithium-ion battery pack, offering a WLTP-certified range of approximately 220–230 km on a single charge. Internationally, the EV comes with two motor options: a 44 bhp unit and a more powerful 64 bhp variant. Charging capabilities include a 7 kW AC charger, which can fully charge the battery in about 4 hours, and a 30 kW DC fast charger that can replenish 80% of the battery in approximately 45 minutes. The design of the Kwid EV is expected to retain the compact and urban-friendly dimensions of its petrol counterpart, with subtle EV-specific styling cues like a closed-off grille and unique alloy wheels. Inside, the cabin may feature modern amenities such as a 10-inch touchscreen infotainment system, a 7-inch digital instrument cluster, and possibly vehicle-to-load (V2L) capabilities, allowing the car to power external devices.